- Katılım
- 21 Haz 2018
- Mesajlar
- 11,495
- Tepkime puanı
- 28,078
- Puanları
- 113
Çevrimdışı
Yazılım upload edilip VIP bölümünde paylaşılacaktır.
Action : Read Firmware.
Selected Alcatel:OT-8082
Exe version: NCKDongle AndroidMTK 2.7.0
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek USB Port_V1632 (COM19)
Boot mode: Brom
BBCHIP: 6580 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
[emmi]EMMC CID: 700100544232383136
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : 05
BaseBand CPU Bootloader Version : FE
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (117Gb+8192Mb) KSI 0x544232383136
EMMC FW VERSION: 20:00:00:00:00:00:00:00
EMMC CID: 700100544232383136 : 00000000000000
EMMC UA SIZE: 0x3a8000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3a8c00000 [14.637 GB]
Status: USB_FULL_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM22)
[system]Reading info, wait...
Build ID: O11019
Display ID: 01009
Version: 8.1.0
Model: 8082
Brand: TCL
Device: U3A_10_WIFI
Manufacturer: TCL
[0]Warning, nvram posible damaged!!.
Start dumping flash, this can take up to 1 hour.......
Dumping Preloader.
Partition: proinfo
Partition: nvram
Partition: protect1
Partition: protect2
Partition: seccfg
Partition: lk
Partition: boot
Partition: recovery
Partition: para
Partition: logo
Partition: odmdtbo
Partition: expdb
Partition: vendor
Partition: frp
Partition: tee1
Partition: tee2
Partition: nvdata
Partition: metadata
Partition: oemkeystore
Partition: secro
Partition: keystore
Partition: system
Partition: cache
Partition: userdata
Partition: flashinfo
Start processing proinfo.bin ......
Reading: BEGIN: 0x80000 - LEN: 0x300000
Start processing nvram.bin ......
Reading: BEGIN: 0x380000 - LEN: 0x500000
Start processing protect1.img ......
Reading: BEGIN: 0x880000 - LEN: 0xa00000
Start processing protect2.img ......
Reading: BEGIN: 0x1280000 - LEN: 0xa00000
Start processing lk
Start processing boot
Start processing recovery
Start processing logo ......
Start processing odmdtbo
Start processing vendor vendor.img
Reading: BEGIN: 0x5fa0000 - LEN: 0x12000000
Start processing trustzone
Start processing secro secro.img
Reading: BEGIN: 0x1d200000 - LEN: 0x600000
Start processing system
Reading: BEGIN: 0x1e000000 - LEN: 0x60000000
Saved to : C:\ProgramData\Android_MTK_Backup_Folder\firmware_backup\MT6580_EMMC_O11019__8_1_0_8082_TCL_2020_09_05_19_38)
Wait untill phone will start charging.
[0]All done.
Selected Alcatel:OT-8082
Exe version: NCKDongle AndroidMTK 2.7.0
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek USB Port_V1632 (COM19)
Boot mode: Brom
BBCHIP: 6580 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
[emmi]EMMC CID: 700100544232383136
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : 05
BaseBand CPU Bootloader Version : FE
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (117Gb+8192Mb) KSI 0x544232383136
EMMC FW VERSION: 20:00:00:00:00:00:00:00
EMMC CID: 700100544232383136 : 00000000000000
EMMC UA SIZE: 0x3a8000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3a8c00000 [14.637 GB]
Status: USB_FULL_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM22)
[system]Reading info, wait...
Build ID: O11019
Display ID: 01009
Version: 8.1.0
Model: 8082
Brand: TCL
Device: U3A_10_WIFI
Manufacturer: TCL
[0]Warning, nvram posible damaged!!.
Start dumping flash, this can take up to 1 hour.......
Dumping Preloader.
Partition: proinfo
Partition: nvram
Partition: protect1
Partition: protect2
Partition: seccfg
Partition: lk
Partition: boot
Partition: recovery
Partition: para
Partition: logo
Partition: odmdtbo
Partition: expdb
Partition: vendor
Partition: frp
Partition: tee1
Partition: tee2
Partition: nvdata
Partition: metadata
Partition: oemkeystore
Partition: secro
Partition: keystore
Partition: system
Partition: cache
Partition: userdata
Partition: flashinfo
Start processing proinfo.bin ......
Reading: BEGIN: 0x80000 - LEN: 0x300000
Start processing nvram.bin ......
Reading: BEGIN: 0x380000 - LEN: 0x500000
Start processing protect1.img ......
Reading: BEGIN: 0x880000 - LEN: 0xa00000
Start processing protect2.img ......
Reading: BEGIN: 0x1280000 - LEN: 0xa00000
Start processing lk
Start processing boot
Start processing recovery
Start processing logo ......
Start processing odmdtbo
Start processing vendor vendor.img
Reading: BEGIN: 0x5fa0000 - LEN: 0x12000000
Start processing trustzone
Start processing secro secro.img
Reading: BEGIN: 0x1d200000 - LEN: 0x600000
Start processing system
Reading: BEGIN: 0x1e000000 - LEN: 0x60000000
Saved to : C:\ProgramData\Android_MTK_Backup_Folder\firmware_backup\MT6580_EMMC_O11019__8_1_0_8082_TCL_2020_09_05_19_38)
Wait untill phone will start charging.
[0]All done.
Son düzenleme:
