Çözüldü Casper VIA S Read Firmware

[silivriserdar]

Merhaba GSM Turkey Üyeleri bu paylaşacağım konuda Casper VIA S cihazına ait read firmware başarı raporunu paylaşacağım. Ben bu işlemi CM2 MTK Tool ile yaptım. Bu araç ücretli bir araçtır.

Lütfen konu altına yorum yaparken Teşekkürler, Elinize sağlık, süper, sağol, helal olsun gibi kelimeler yazıp konuları kirletmeyelim. Herkes aradığını bu mesajlar yüzünden bulamıyor. Altta beğen butonuna basmanız yeterlidir. Konu ile ilgili sorununuzu veya çözümünüz varsa yorum yapın. Konu ile alakasız cevaplar silinecektir.

​

Card found : 4B1E57BB , v0151
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.32

Load IDBase v1121431 Ok!

UserName and/or Password not set! Can't continue!

Load IDBase v1121431 Ok!

Operation : Read Firmware [ v2.32 ]

ExtSparse : Enabled
ForceRead : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM8)
MODE : PRELOADER PORT
PORT : 8
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN
BROM : BROM|BL : 0xFF|0x03
BROM : PRELOADER PORT
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
DA : AGENT started!
DA : SYNC
DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x0003A000 [ 232,00 KB ]
DRAM: 0xC0000000 [ 3,00 GB ]

EMMC: CID : 700100413239313238901A2F848E6607
EMMC: VEN : KINGSTON : OEM : 0 : ID : 413239313238
EMMC: VEN : KINGSTON : A29128
EMMC: SNN : 439321742 ( 0x1A2F848E) , MF : 6/2019

EMMC: 
BOOT1 : 0x00400000 [ 4,00 MB ]
BOOT2 : 0x00400000 [ 4,00 MB ]
RPMB : 0x00400000 [ 4,00 MB ]
USER : 0x1D28000000 [ 116,63 GB ]

CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 97245DE19F4AE8CFE6B57FE53090B9AD

DA : USB : HIGH-SPEED

Boot done!

Product Brand : Casper
Product Device : VIA_S
Product Model : VIA_S
Product Name : VIA_S
Patch Level : QP1A.190711.020
Display ID : VIA_S_20200521_c2.01
Ver. CodeName : REL
Ver. Release : 10
Sec. Patch : 2020-04-05
Build Time : 21.05.2020
Product Manfct : Casper
Product Info : VIA_S
Product Board : M6206B
Board Platform : mt6765

MT6765__Casper__VIA_S__10__VIA_S_20200521_c2.01__QP1A.190711.020__VIA_S

Read : preloader.bin
Read : recovery.img
Read : persist.img
ExtSparse : Compression ratio : 52%
Read : proinfo.img
Read : md1rom.img
Read : spmfw.img
Read : tinysys-scp.bin
Read : sspm.img
Read : nvram.bin
Read : lk.bin
Read : boot.img
Read : logo.bin
Read : dtbo.img
Read : tz.img
Read : vendor.img
ExtSparse : Compression ratio : 62%
Read : system.img
ExtSparse : Compression ratio : 5%
Read : vbmeta.img
Read : cache.img
Read : userdata.img

FW Size : 3,38 GB
Android Info saved : _Android_info.txt
Scatter : MT6765_Android_scatter.txt
Saved to : C:\Users\noeb\Desktop\CASPER VIA S\MT6765__Casper__VIA_S__10__VIA_S_20200521_c2.01__QP1A.190711.020__VIA_S\

Done!
Elapsed: 00:03:32