- Katılım
- 21 Haz 2018
- Mesajlar
- 11,625
- Tepkime puanı
- 28,000
- Puanları
- 113
Çevrimiçi
Vip üyeler dosyaya buradan ulaşabilir
Kod:
Action : Read Firmware.
Selected 0-By CPU:ELBRUS
Exe version: NCKDongle AndroidMTK 2.6.3
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM_V1632 (Android) (COM35)
Boot mode: Preloader
BBCHIP: 8163 1 cb00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT8163
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 256 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (117Gb+16384Mb) UNKNOWN_EMMC_DEVICE
EMMC FW VERSION: 10:00:00:00:00:00:00:00
EMMC CID: 13014E51324A333643 : 00000000000000
EMMC UA SIZE: 0x3ab400000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3ac000000 [14.688 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM41)
[3][Missing imei entry]Warning, nvram posible damaged!!.
Dumping Preloader.
Partition: proinfo
Partition: nvram
Partition: ITEMS
Partition: protect1
Partition: protect2
Partition: persist
Partition: seccfg
Partition: lk
Partition: lk2
Partition: boot
Partition: recovery
Partition: secro
Partition: para
Partition: logo
Partition: dtbo
Partition: vendor
Partition: expdb
Partition: frp
Partition: tee1
Partition: tee2
Partition: kb
Partition: dkb
Partition: metadata
Partition: vbmeta
Partition: system
Partition: cache
Partition: userdata
Partition: flashinfo
Start dumping flash, this can take up to 1 hour.......
Start processing proinfo
Reading: BEGIN: 0x80000 - LEN: 0x300000
Start processing nvram
Start processing protect1 ......
Reading: BEGIN: 0x980000 - LEN: 0xa00000
Start processing protect2 ......
Reading: BEGIN: 0x1380000 - LEN: 0xa00000
Start processing persist ......
Reading: BEGIN: 0x1d80000 - LEN: 0x3000000
Start processing lk
Start processing boot
Start processing recovery
Start processing logo ......
Start processing frp ......
Reading: BEGIN: 0x29240000 - LEN: 0x100000
Start processing trustzone
Start processing system
Reading: BEGIN: 0x2d000000 - LEN: 0xa0000000
Saved to : C:\Users\Admin\Documents\Android_MTK\firmware_backup\MT8163_EMMC_2019_12_16_14_43)
Wait untill phone will start charging.
[0]All done.
Moderatör tarafında düzenlendi: