Çözüldü Gigaset GX290 FRP Reset

silivriserdar · 14 Tem 2023

Merhaba GSM Turkey Üyeleri bu paylaşacağım konuda Gigaset GX290 cihazına ait FRP başarı raporunu paylaşacağım. Ben bu işlemi CM2 MTK Tool ile yaptım. Bu araç ücretli bir araçtır.

Kod:

=== [12-07-2023 22:21:56 C:\InfinityBox\CM2MT2\CM2MT2.exe] === Wait... S/N: 4B1E57BB v0155 Infinity [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.42 Firmware files: C:\cereus\ Backup files: C:\InfinityBox\CM2MT2\backup\ Backup files: 7 dirs: 0 Build device list... Init environment... Load IDBase v124493 Ok Check for updates... Infinity #CM2MT2 v2.46 Required firmware v0155 Wrong Username or Password - set it at [Settings] to get server access Operation: Identify Device [ v2.42 ] Platform: MTK SmartPhone - MT65/67/68/81/83/87 | Helio G/P/X Mode: FLASH PORT: BOTH [ B + P ] [+] Read Deep info: PRL, HW, DEBUG [+] Auto-EMI [+] FireFly UNI-Proto [+] Vendor-Specific Analyzer [-] Local SLA [-] Force BROM Wait... 1. Power Off the device 2. Wait 20 seconds 3. Connect USB cable to device [remember Vol+ | Vol-]Waiting for device connection... PTFN: MediaTek USB Port (COM16) MODE: BOOTROM; PORT: 16 Waiting BOOT ack... BROM: Skip ACK verify BROM: Init... Init passed CHIP: MT6763 SBID: 0x8A00 HWVR: 0xCA01 SWVR: 0x0001 EVOL: 0x0000 HWC: 0x0690 CODE: Bianco TYPE: MODERN [RAPHAEL] MEID: B1E6FE0B80A03F0A9AC132A0CDE94256 BROM: Sec Level: 0x00000000 Mode: PLAIN VER: 0x05 BL: 0xFE [BOOTROM] SOCID: CB9CD800AEE675C418E569782ED35503C2C2C15A6584BB0FF7E6D6B9DF78A453 BROM: EMI: Search EMI: Found AGENT: AUTO: 0_base: base_v2216 [3365c4d2] C:\InfinityBox\CM2MT2\boot\0_base\base_v2216\MTK_AllInOne_DA.bin Looking for suitable BootChain in DA... Found MT6763 AGENT: MTK_DOWNLOAD_AGENT BROM: Sending 1st DA... DA sent Transfer control to DA... DA: AGENT started DA: SYNC MODE: BROM EXT_RAM NOT initialized EMMC CID: 13014E53304A39463810003C03C8A4C7 VEN: Micron OEM: 78 ID: 53304A394638 [S0J9F8] PRV: 0x10 SNN: 3933128 [0x003C03C8] MM/YY: 10/2017 EMI: Init EMI by INTERNAL Database EMI: FireFly preloader_k63v2_64_bsp.bin with 3 memory type(s) supported 1. eMMC DDR3 ID: 13014E53304A394237 Ven: Micron | Dev: S0J9B7 RAM: 3.00 GB 2. eMMC DDR3 ID: 13014E53304A394638 Ven: Micron | Dev: S0J9F8 RAM: 4.00 GB 3. eMMC DDR3 ID: 13014E53304A394E38 Ven: Micron | Dev: S0J9N8 RAM: 4.00 GB EMI: EXT_RAM CFG Passed DA: Boot to 2nd DA... 2nd stage confirmed DA: SYNC passed Load HW info... SRAM: 0x00040000 [ 256.00 KB ] DRAM: 0x100000000 [ 4.00 GB ] EMMC CID: 13014E53304A39463810003C03C8A4C7 VEN: Micron OEM: 78 ID: 53304A394638 [S0J9F8] PRV: 0x10 SNN: 3933128 [0x003C03C8] MM/YY: 10/2017 BOOT1: 0x00400000 [ 4.00 MB ] BOOT2: 0x00400000 [ 4.00 MB ] RPMB: 0x00400000 [ 4.00 MB ] USER: 0xE8F800000 [ 58.24 GB ] CHIP: MT6763 SBID: 0x8A00 HWVR: 0xCA01 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0690 CODE: Bianco TYPE: MODERN [RAPHAEL] RNID: 7B221384FE3241FFE63B65D920504DD0 MEID: B1E6FE0B80A03F0A9AC132A0CDE94256 USB: HIGH-SPEED Boot done [1] Reading... Ok SW : Gigaset/GX290_EEA/GX290:10/QP1A.190711.020/1620986175:user/release-keys Product Brand: Gigaset Product Device: GX290 Product Model: GX290 Product Name: GX290_EEA Patch Level: QP1A.190711.020 Display ID: Gigaset_GX290_10.0_V19_20210514 SW Version: 1620986175 Ver. CodeName: REL Ver. Release: 10 Sec. Patch: 2021-05-05 Build Time: 14/05/2021 09:48:54 CPU : arm64-v8a,armeabi-v7a,armeabi CPU : armeabi-v7a,armeabi CPU : arm64-v8a Product Info: GX290 SW : full_k63v2_64_bsp-user 10 QP1A.190711.020 1620986175 release-keys Product Board: k63v2_64_bsp Board Platform: mt6763 Product Manfct: Gigaset Strategy: 7 Firmware ID: MT6763_Gigaset_GX290_10_Gigaset_GX290_10.0_V19_20210514_QP1A.190711.020_GX290 Verify firmware [MT6763_Gigaset_GX290_10_Gigaset_GX290_10.0_V19_20210514_QP1A.190711.020_GX290]... Firmware is unknown Please upload https://infinity-box.com/?r=100020 userData : fileSystem [ext4] with FDE ( forced fde or fbe ) NVRAM: TK_MD_BASIC_MDBIN_PCB01_MT6763_S00.MOLY_LR12A_R2_MP_V156_5 NVRAM: Items: 0xA0 Size: 0x11AD1A State: Ok WiFi MAC: AA0036004400 BlTh MAC: 7A1F4683A74D IMEI[1]: IMEI[2]: Verify device config... Ok Loaders Ok Backup [20] to C:\InfinityBox\CM2MT2\backup\MT6763__B1E6FE0B80A03F0A9AC132A0CDE94256\ [23] Read: NVRAM [9] Read: NVDATA [2] Read: PROINFO [24] Read: LK [8] Read: NVCFG [11] Read: PROTECT1 [1] Read: PGPT [14] Read: PERSIST [0] Read: PRELOADER Done 9 files Compress: C:\InfinityBox\CM2MT2\backup\MT6763__B1E6FE0B80A03F0A9AC132A0CDE94256\ Cleanup... Ok Verify C:\InfinityBox\CM2MT2\backup\MT6763__B1E6FE0B80A03F0A9AC132A0CDE94256.7z Verified STORAGE : Life Status : eMMC : OK! STORAGE : OTP Status : NOT Enabled! STORAGE : RPMB Status : eMMC : RPMB KEY NOT PROGRAMMED [USABLE] Scan preloader... EMI: MT6763 preloader_k63v2_64_bsp.bin with 3 memory type(s) supported 1. eMMC DDR3 ID: 13014E53304A394237 Ven: Micron | Dev: S0J9B7 RAM: 3.00 GB 2. eMMC DDR3 ID: 13014E53304A394638 Ven: Micron | Dev: S0J9F8 RAM: 4.00 GB 3. eMMC DDR3 ID: 13014E53304A394E38 Ven: Micron | Dev: S0J9N8 RAM: 4.00 GB Preloader saved: C:\InfinityBox\CM2MT2\backup\preloader\preloader_k63v2_64_bsp.bin Verify C:\InfinityBox\CM2MT2\backup\preloader\preloader_k63v2_64_bsp.bin [a1a29ddc]... Stored Done: 00:03:29 Operation: Reset Settings/Format FS [ v2.42 ] Platform: MTK SmartPhone - MT65/67/68/81/83/87 | Helio G/P/X Mode: FRP [ RESET PROTECTION ] Wait... 1. Power Off the device 2. Wait 20 seconds 3. Connect USB cable to device [remember Vol+ | Vol-]Waiting for device connection... PTFN: MediaTek USB Port (COM16) MODE: BOOTROM; PORT: 16 Waiting BOOT ack... BROM: Skip ACK verify BROM: Init... Init passed CHIP: MT6763 SBID: 0x8A00 HWVR: 0xCA01 SWVR: 0x0001 EVOL: 0x0000 HWC: 0x0690 CODE: Bianco TYPE: MODERN [RAPHAEL] MEID: B1E6FE0B80A03F0A9AC132A0CDE94256 BROM: Sec Level: 0x00000000 Mode: PLAIN VER: 0x05 BL: 0xFE [BOOTROM] SOCID: CB9CD800AEE675C418E569782ED35503C2C2C15A6584BB0FF7E6D6B9DF78A453 AGENT: AUTO: 0_base: base_v2216 [3365c4d2] C:\InfinityBox\CM2MT2\boot\0_base\base_v2216\MTK_AllInOne_DA.bin Looking for suitable BootChain in DA... Found MT6763 AGENT: MTK_DOWNLOAD_AGENT BROM: Sending 1st DA... DA sent Transfer control to DA... DA: AGENT started DA: SYNC MODE: BROM EXT_RAM NOT initialized EMMC CID: 13014E53304A39463810003C03C8A4C7 VEN: Micron OEM: 78 ID: 53304A394638 [S0J9F8] PRV: 0x10 SNN: 3933128 [0x003C03C8] MM/YY: 10/2017 EMI: Init EMI by INTERNAL Database EMI: FireFly preloader_k63v2_64_bsp.bin with 3 memory type(s) supported 1. eMMC DDR3 ID: 13014E53304A394237 Ven: Micron | Dev: S0J9B7 RAM: 3.00 GB 2. eMMC DDR3 ID: 13014E53304A394638 Ven: Micron | Dev: S0J9F8 RAM: 4.00 GB 3. eMMC DDR3 ID: 13014E53304A394E38 Ven: Micron | Dev: S0J9N8 RAM: 4.00 GB EMI: EXT_RAM CFG Passed DA: Boot to 2nd DA... 2nd stage confirmed DA: SYNC passed Load HW info... SRAM: 0x00040000 [ 256.00 KB ] DRAM: 0x20000000 [ 512.00 MB ] EMMC CID: 13014E53304A39463810003C03C8A4C7 VEN: Micron OEM: 78 ID: 53304A394638 [S0J9F8] PRV: 0x10 SNN: 3933128 [0x003C03C8] MM/YY: 10/2017 BOOT1: 0x00400000 [ 4.00 MB ] BOOT2: 0x00400000 [ 4.00 MB ] RPMB: 0x00400000 [ 4.00 MB ] USER: 0xE8F800000 [ 58.24 GB ] CHIP: MT6763 SBID: 0x8A00 HWVR: 0xCA01 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0690 CODE: Bianco TYPE: MODERN [RAPHAEL] RNID: 7B221384FE3241FFE63B65D920504DD0 MEID: B1E6FE0B80A03F0A9AC132A0CDE94256 USB: HIGH-SPEED Boot done [1] Reading... Ok Verify device config... Ok Loaders Ok Backup exist: C:\InfinityBox\CM2MT2\backup\MT6763__B1E6FE0B80A03F0A9AC132A0CDE94256 [1] Process: RESET PROTECTION... Format Ok: RESET PROTECTION [2] Verified [1] Verified [2] Verified Done: 00:01:38 Reconnect Power/Cable now

Lütfen konu altına yorum yaparken Teşekkürler, Elinize sağlık, süper, sağol, helal olsun gibi kelimeler yazıp konuları kirletmeyelim. Herkes aradığını bu mesajlar yüzünden bulamıyor. Altta beğen butonuna basmanız yeterlidir. Konu ile ilgili sorununuzu veya çözümünüz varsa yorum yapın. Konu ile alakasız cevaplar silinecektir.

Çözüldü Gigaset GX290 FRP Reset

silivriserdar