silivriserdar
Genel Moderator
- Katılım
- 21 Haz 2018
- Mesajlar
- 21,980
- Tepkime puanı
- 44,654
- Puanları
- 113
- Yaş
- 40
Çevrimdışı
Merhaba GSM Turkey Üyeleri bu paylaşacağım konuda Huawei GR3 TAG-L01 cihazının yazılımı nasıl çekilir onu anlatacağım.
Bu işlemi yapabilmek için elinizde NCK Dongle olması lazım. Bu araç ücretli satılan bir araçtır ve genellikle cep telefonu tamir yapan yerlerde mevcuttur.
Cihazı kapalı şekilde bağlayın.
Bu işlemi yapabilmek için elinizde NCK Dongle olması lazım. Bu araç ücretli satılan bir araçtır ve genellikle cep telefonu tamir yapan yerlerde mevcuttur.
Cihazı kapalı şekilde bağlayın.
Kod:
Action : Read Firmware.
Selected Huawei:TAG-L01 NEW
Exe version: NCKDongle AndroidMTK 2.6.8
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM23)
Boot mode: Preloader
BBCHIP: 337 0 ca00
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6753
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (117Gb+16384Mb) HYNIX 0x484147326505
EMMC FW VERSION: 07:00:00:00:00:00:00:00
EMMC CID: 90014A484147326505 : 00000000000000
EMMC UA SIZE: 0x3ab800000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3ac400000 [14.691 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM46)
Build ID: HUAWEITAG-L01
Display ID: TAG-L01C525B106
Version: 5.1
Build Date: Tue Mar 7 17:23:06 CST 2017
Model: HUAWEI TAG-L01
Brand: HUAWEI
Device: HWTAG-L6753
Manufacturer: HUAWEI
Region: TR
Mediatek Version Release: TAG-L01C525B106
FRP partition: /dev/block/platform/mtk-msdc.0/by-name/frp
IMEI[1]:
IMEI[2]:
Dumping Preloader.
Partition: proinfo
Partition: nvram
Partition: protect1
Partition: protect2
Partition: lk
Partition: para
Partition: boot
Partition: recovery
Partition: logo
Partition: log
Partition: expdb
Partition: ROOTM
Partition: seccfg
Partition: oemkeystore
Partition: secro
Partition: keystore
Partition: tee1
Partition: tee2
Partition: frp
Partition: nvdata
Partition: metadata
Partition: system
Partition: cache
Partition: userdata
Partition: flashinfo
Start dumping flash, this can take up to 1 hour.......
Start processing proinfo.bin ......
Reading: BEGIN: 0x80000 - LEN: 0x300000
Start processing nvram.bin ......
Reading: BEGIN: 0x380000 - LEN: 0x500000
Start processing protect1.img ......
Reading: BEGIN: 0x880000 - LEN: 0xa00000
Start processing protect2.img ......
Reading: BEGIN: 0x1280000 - LEN: 0xa00000
Start processing lk
Start processing boot
Start processing recovery
Start processing logo ......
Start processing secro.img ......
Reading: BEGIN: 0x9600000 - LEN: 0x600000
Start processing trustzone
Start processing nvdata.img ......
Reading: BEGIN: 0xaf00000 - LEN: 0x2000000
Start processing system
Reading: BEGIN: 0xf000000 - LEN: 0xe6800000
Saved to : C:\nckdongle\android_mtk\Android_MTK_Backup_Folder\firmware_backup\MT6753_EMMC_HUAWEITAG-L01__5_1_HUAWEI TAG-L01_HUAWEI_2020_05_05_18_29)
Wait untill phone will start charging.
[0]All done.