Mardanov.T

Özel Üye
Katılım
1 Kas 2019
Mesajlar
485
Tepkime puanı
8,081
Puanları
93
Konum
UZB
Çevrimdışı
Merhaba GSM Turkey Üyeleri bu paylaşacağım konuda Honor 10x Lite cihazına nasıl Imei Repair İşlemi yapılır onu anlatacağım.

Bu işlemi yapabilmek için elinizde ChimeraTool olması lazım. Bu araç ücretli bir araçtır ve genellikle cep telefonu tamir yapan yerlerde mevcuttur.

Lütfen konu altına yorum yaparken Teşekkürler, Elinize sağlık, süper, sağol, helal olsun gibi kelimeler yazıp konuları kirletmeyelim. Herkes aradığını bu mesajlar yüzünden bulamıyor. Altta beğen butonuna basmanız yeterlidir. Konu ile ilgili sorununuzu veya çözümünüz varsa yorum yapın. Konu ile alakasız cevaplar silinecektir.


Read Cert

Kod:
Chimera Mobile Phone Utility version: 28.13.1511 @ 2021-04-20
Printing phone history
Read Cert    20.04.2021    8:50   
Reading certificate...
Rebooting phone to fastboot mode
Phone detected
Rebooting phone to factory mode
Changing to factory mode
Rebooting phone to USB update mode
Downloading ERECOVERY files
Flashing ERECOVERY files
Rebooting phone to USB update mode
Please put the phone into factory mode via Test Point!

Or do an USB firmware update with a firmware version that is equal or not much older than the one currently on the phone.

If you used Test Point to switch into factory mode, you should immediately reconnect your phone's battery as soon as the program detects the device.

Uploading data
Servicing the phone
Please be patient, this step can be long. DO NOT DISCONNECT the phone while the procedure is running. It can damage your phone permanently.
The OEMINFO PSID seems to be invalid.
Saving IMEI backup: C:/Program Files (x86)/Chimera/Backup/Huawei/DNN-LX9_Group_1_Slot_1_8617030**116***.imei
Saving IMEI backup: C:/Program Files (x86)/Chimera/Backup/Huawei/DNN-LX9_Group_1_Slot_2_8617030**856***.imei
Finished at local time: [04.20.21 15:27:47]
WorkID: 131863272

Write Cert
Kod:
Chimera Mobile Phone Utility version: 28.13.1511 @ 2021-04-20
Printing phone history
Read Cert    20.04.2021    10:24   
Writing certificate...
Rebooting phone to fastboot mode
Phone detected
Validating certificate files
Validating C:/Users/user/Downloads/Telegram Desktop/2_***4654521333385***.imei.
Validating C:/Users/user/Downloads/Telegram Desktop/2_***4654521333385***.imei.
Rebooting phone to factory mode
Changing to factory mode
Rebooting phone to USB update mode
Downloading ERECOVERY files
Flashing ERECOVERY files
Rebooting phone to USB update mode
Please put the phone into factory mode via Test Point!

Or do an USB firmware update with a firmware version that is equal or not much older than the one currently on the phone.

If you used Test Point to switch into factory mode, you should immediately reconnect your phone's battery as soon as the program detects the device.

Uploading data
Servicing the phone
Please be patient, this step can be long. DO NOT DISCONNECT the phone while the procedure is running. It can damage your phone permanently.
The OEMINFO PSID seems to be invalid.
Uploading certificate file from C:/Users/user/Downloads/Telegram Desktop/2_***4654521333385***.imei
Uploading certificate file from C:/Users/user/Downloads/Telegram Desktop/2_***4654521333385***.imei
Finished at local time: [04.20.21 15:34:42]
WorkID: 131863792
 

Ekli dosyalar

  • 1111.jpg
    1111.jpg
    2.3 MB · Görüntüleme: 105
  • 22222.jpg
    22222.jpg
    2.2 MB · Görüntüleme: 131
  • TEST POINT.jpg
    TEST POINT.jpg
    3.2 MB · Görüntüleme: 129
  • IMG_20210420_154013.jpg
    IMG_20210420_154013.jpg
    804.4 KB · Görüntüleme: 118
Merhaba GSM Turkey Üyeleri bu paylaşacağım konuda Honor 10x Lite cihazına nasıl Imei Repair İşlemi yapılır onu anlatacağım.

Bu işlemi yapabilmek için elinizde ChimeraTool olması lazım. Bu araç ücretli bir araçtır ve genellikle cep telefonu tamir yapan yerlerde mevcuttur.

Lütfen konu altına yorum yaparken Teşekkürler, Elinize sağlık, süper, sağol, helal olsun gibi kelimeler yazıp konuları kirletmeyelim. Herkes aradığını bu mesajlar yüzünden bulamıyor. Altta beğen butonuna basmanız yeterlidir. Konu ile ilgili sorununuzu veya çözümünüz varsa yorum yapın. Konu ile alakasız cevaplar silinecektir.


Read Cert

Kod:
Chimera Mobile Phone Utility version: 28.13.1511 @ 2021-04-20
Printing phone history
Read Cert    20.04.2021    8:50   
Reading certificate...
Rebooting phone to fastboot mode
Phone detected
Rebooting phone to factory mode
Changing to factory mode
Rebooting phone to USB update mode
Downloading ERECOVERY files
Flashing ERECOVERY files
Rebooting phone to USB update mode
Please put the phone into factory mode via Test Point!

Or do an USB firmware update with a firmware version that is equal or not much older than the one currently on the phone.

If you used Test Point to switch into factory mode, you should immediately reconnect your phone's battery as soon as the program detects the device.

Uploading data
Servicing the phone
Please be patient, this step can be long. DO NOT DISCONNECT the phone while the procedure is running. It can damage your phone permanently.
The OEMINFO PSID seems to be invalid.
Saving IMEI backup: C:/Program Files (x86)/Chimera/Backup/Huawei/DNN-LX9_Group_1_Slot_1_8617030**116***.imei
Saving IMEI backup: C:/Program Files (x86)/Chimera/Backup/Huawei/DNN-LX9_Group_1_Slot_2_8617030**856***.imei
Finished at local time: [04.20.21 15:27:47]
WorkID: 131863272

Write Cert
Kod:
Chimera Mobile Phone Utility version: 28.13.1511 @ 2021-04-20
Printing phone history
Read Cert    20.04.2021    10:24   
Writing certificate...
Rebooting phone to fastboot mode
Phone detected
Validating certificate files
Validating C:/Users/user/Downloads/Telegram Desktop/2_***4654521333385***.imei.
Validating C:/Users/user/Downloads/Telegram Desktop/2_***4654521333385***.imei.
Rebooting phone to factory mode
Changing to factory mode
Rebooting phone to USB update mode
Downloading ERECOVERY files
Flashing ERECOVERY files
Rebooting phone to USB update mode
Please put the phone into factory mode via Test Point!

Or do an USB firmware update with a firmware version that is equal or not much older than the one currently on the phone.

If you used Test Point to switch into factory mode, you should immediately reconnect your phone's battery as soon as the program detects the device.

Uploading data
Servicing the phone
Please be patient, this step can be long. DO NOT DISCONNECT the phone while the procedure is running. It can damage your phone permanently.
The OEMINFO PSID seems to be invalid.
Uploading certificate file from C:/Users/user/Downloads/Telegram Desktop/2_***4654521333385***.imei
Uploading certificate file from C:/Users/user/Downloads/Telegram Desktop/2_***4654521333385***.imei
Finished at local time: [04.20.21 15:34:42]
WorkID: 131863792
ustam kolay gelsin imei tamirini nasıl yapıyoruz.
 
Moderatör tarafında düzenlendi:
Yukarıdaki 3. resimdeki gibi cihazın içini açıp Testpoint yapın.
Bu modele Cert yazılıyor sadece.
ustam read cert yaptım ama işlemi yapan ustamız write cert yaparken oradaki imei numaralarını değiştirmiş başka bir cihazdan çekerek mi yapmış yoksa çekmiş olduğu cert üzerinde oynamamı yapmış onu merakk ettim.
 
ustam read cert yaptım ama işlemi yapan ustamız write cert yaparken oradaki imei numaralarını değiştirmiş başka bir cihazdan çekerek mi yapmış yoksa çekmiş olduğu cert üzerinde oynamamı yapmış onu merakk ettim.

Başka cihazdan alınan certi yazmış.
 
Geri
Üst Alt