FRP Huawei MediaPad T5 AGS2-W09 FRP Reset (Octoplus)

[odunbey]

Welcome to Octoplus Huawei Software v. 1.3.3

To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode

To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode

To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'

Found COM ports:
1: COM7 HUAWEI USB COM 1.0

Job ID: 0000000001D672CB
2023-02-20 17:04:57
Starting Reset FRP
Selected phone model:  AGS2-L09
Searching HUAWEI USB COM 1.0 port...
Detected  HUAWEI USB COM 1.0  port
Phone connect successfully
Downloading resource...
Writing  XLOADER  partition...
Writing  FASTBOOT  partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found android device: V4QBB20518101271
Detected  Android Sooner Single ADB Interface  port
Reading basic data...
Device Model:  AGS2-W09
Android Version:  8.0.0
FB Lock State:  UNLOCKED
User Lock State:  LOCKED
Downloading resource...
Writing FRP partition..
Reset FRP done.
Performed by  1.3.3  Software version.

Job ID: 0000000001AF445E
2023-02-20 17:05:59
Starting ON/OFF Factory Mode
Selected phone model:  AGS2-L09
To Enable Factory mode put the phone in Upgrade mode and connect USB cable!
To Disable Factory mode connect the phone in Factory mode or Factory Fastboot mode!
Performing OFF Factory Mode operation...
Searching Fastboot devices...
Found android device: V4QBB20518101271
Detected  Android Sooner Single ADB Interface  port
Device Model:  AGS2-W09
Writing secure data...
Downloading resource...
Rebooting device...
ON/OFF Factory Mode done.
Performed by  1.3.3  Software version.