Çözüldü Huawei P Smart 2019 POT-LX1 Android 10 FRP Reset İşlemi

[demir5434]

POT-LX1 P-SMART 2019 ANDRİOD; 10.0.0.296(C432E10R1P3)‬ İŞLEMİ YAPABİLMENİZ İÇİN OCTOPLUS HESABI OLMASI LAZIM KREDİ KESMEZ...

Starting Reset FRP (Factory Mode)
Selected phone model: ‪POT-LX1‬
Username: XXXXXX
Connecting to the credit server...
Searching HUAWEI USB COM 1.0 port...
Detected ‪HUAWEI USB COM 1.0‬ port
Writing bootloader KIRIN710_V1...
Initializing remote service connection...
Writing ‪XLOADER‬ partition...
Writing ‪UCE‬ partition...
Writing ‪FASTBOOT‬ partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found a fastboot device: 39V4C18C17015411

Device Model: ‪POT-LX1‬
System: ‪POT-LX1 10.0.0.296(C432E10R1P3)‬
Checking balance...
Your balance: 100 credits
Sending device information...
Sending firmware information...
To perform this operation you need to have: 0 credits.
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: ‪UNLOCKED‬
User Lock State: ‪LOCKED‬

Device Model: ‪POT-LX1‬
System: ‪POT-LX1 10.0.0.296(C432E10R1P3)‬
Resetting FRP...
Writing FRP partition..
Rebooting device...

Reset FRP (Factory Mode) done.
Performed by ‪1.2.5‬ Software version.

 

[looupss]

edl nasıl aldınız ?

 

[demir5434]

edl nasıl aldınız ?

Kusura bakmayın hocam tabiki işlem için arka kapak sökülüp testpoint yapılması lazım yorgunluktan unutmuşum.