- Katılım
- 31 Eki 2018
- Mesajlar
- 2,299
- Tepkime puanı
- 19,046
- Puanları
- 113
Çevrimdışı
Kod:
Welcome to Octoplus Huawei Software v. 1.3.3
To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode
To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode
To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'
Found COM ports:
1: COM65 HUAWEI USB COM 1.0
Job ID: 0000000001A98FB0
2023-02-05 13:31:45
Starting Reset Huawei ID
Selected phone model: PPA-LX2
Searching HUAWEI USB COM 1.0 port...
Detected HUAWEI USB COM 1.0 port
Phone connect successfully
Writing bootloader KIRIN710A_V3...
Initializing remote service connection...
Downloading resource...
Writing XLOADER partition...
Writing UCE partition...
Writing FASTBOOT partition...
Operation in progress. Please wait for instructions...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found android device: CNXN
Detected Android Sooner Single ADB Interface port
Reading basic data...
Device Model: PPA-LX2
System: PPAH-L22 10.1.1.270(C432E4R2P1)
Android Version: 10
Base Version: PPAH-LGRP2-OVS 10.1.1.270
Custom Version: PPAH-L22-CUST 10.1.1.4(C432)
Preload Version: PPAH-L22-PRELOAD 10.1.1.1(C432R2)
C_Version: C432
D_Version: D000
FB Lock State: LOCKED
User Lock State: LOCKED
Downloading resource...
Connecting to the credit server...
Username: Default_user
Checking balance...
Your balance: 0 credits
Sending device information...
Sending firmware information...
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: UNLOCKED
User Lock State: LOCKED
Device Model: PPA-LX2
System: PPAH-L22 10.1.1.270(C432E4R2P1)
MEID: 00000000000000
IMEI A:
IMEI B:
S/N:
Resetting Huawei ID...
Rebooting device...
Warning: Please perform "Clear data" manually via Recovery Mode, if your device doesn`t start properly!
Reset Huawei ID done.
Performed by 1.3.3 Software version.