Çözüldü Huawei Y5 II 2020 Y5P DRA-LX9 IMEI Repair Android 10.1 Magic UI 3.1 World 1st

[Mardanov.T]

Write Imei

Job ID: 000000000028465C

2020-11-24 07:17:50 GMT -------------------------------------------------

Starting Connect

Selected phone model:  DRA-LX9

Please, put your device in Factory mode (use "ON/OFF Factory Mode" option or Hardware Test Point) and insert USB cable



Detecting Chip Version...

HW Chip : MT6765

HW Version : 8A00.CA00.0000.0000

Brom Version: 5

Boot Loader Version: FE

Sending Authentication Data

Sending Download Agent...

DA successfully sent

Synchronizing with DA...

Mobile Status: SYNC

Mobile Status: brom

Sending BootLoader Info...

Initializing Memory Flash...

Initialization completed

Sending Loader...

Mobile Status: SYNC

Loader successfully sent

Reading Flash Info...

EMMC rpmb size : 16 Mb

EMMC boot1 size : 4 Mb

EMMC boot2 size : 4 Mb

EMMC gp1 size : 0 Mb

EMMC gp2 size : 0 Mb

EMMC gp3 size : 0 Mb

EMMC gp4 size : 0 Mb

EMMC user area size : 29820 Mb

IMEI A:  ***99604128*****

IMEI B:  ***99604278*****



Connect done.

Performed by  1.2.2.2  Software version.



Job ID: 0000000000284689

2020-11-24 07:18:40 GMT -------------------------------------------------

Starting Repair Info

New IMEI A:  **78000478******

New IMEI B:  **78000498******

Creating partition backup:  DRA-LX9_nvram_2020-11-24_10-18-41.bin

Writing secure data...

Please perform a Factory Data Reset of your device manually through Recovery mode.



Repair Info done.

Performed by  1.2.2.2  Software version.

 

[baynef]

Welcome to Octoplus Huawei Software v.‪1.3.3‬

To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode

To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode

To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'

Found COM ports:
1: COM7 USB Serial Port

Job ID: 0000000001F7D93B
2023-05-19 06:38:06
Starting Repair Info
Selected phone model: ‪DRA-LX9‬
Please, put your device in Factory mode (use "ON/OFF Factory Mode" option or Hardware Test Point) and insert USB cable
Detected ‪MediaTek USB Port‬ port
Handshake done
Detecting Chip Version...
HW Chip : MT6765
HW Version : 8A00.CA00.0000.0000
Brom Version: 5
Boot Loader Version: FE
Sending Authentication Data...
Using MTK_AllInOne_DA_v3.3001.2018/10/18.17:38_452898 download agent...
Found a suitable Download agent
Sending Download Agent...
DA successfully sent
Synchronizing with DA...
Mobile Status: SYNC
Mobile Status: brom
Sending BootLoader Info...
Initializing Memory Flash...
Initialization completed
Sending Loader...
Mobile Status: SYNC
Loader successfully sent
Reading Flash Info...
EMMC rpmb size : 16 Mb
EMMC boot1 size : 4 Mb
EMMC boot2 size : 4 Mb
EMMC gp1 size : 0 Mb
EMMC gp2 size : 0 Mb
EMMC gp3 size : 0 Mb
EMMC gp4 size : 0 Mb
EMMC user area size : 29820 Mb
IMEI A: ‪869638044149414‬
IMEI B: ‪869638045049415‬
New IMEI A: ‪***************
New IMEI B: *****************
Creating partition backup: ‪DRA-LX9_nvram_2023-05-19_09-38-22.bin‬
Repairing Imei A...
Repairing Imei B...
Writing secure data...
Please perform a Factory Data Reset of your device manually through Recovery mode.
Repair Info done.
Performed by ‪1.3.3‬ Software version.