Çözüldü Huawei Y6s JAT-L29 IMEI Repair (Octoplus)

[odunbey]

Welcome to Octoplus Huawei Software v. 1.3.3

To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode

To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode

To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'

Found COM ports:

Job ID: 0000000001A88BF5
2023-02-10 10:22:24
Starting Repair Info
Selected phone model:  JAT-L29
Please, put your device in Factory mode (use "ON/OFF Factory Mode" option or Hardware Test Point) and insert USB cable
Detected  MediaTek USB Port_V1633  port
Handshake done
Detecting Chip Version...
HW Chip : MT6765
HW Version : 8A00.CA00.0000.0000
Brom Version: 5
Boot Loader Version: FE
Downloading resource...
Sending Authentication Data...
Canceling... Please be patient!
Error: Can’t receive 0xE2
Error: Sending Authentication Error
Error: Authentication Error
Repair Info failed.
Performed by  1.3.3  Software version.

Job ID: 0000000001D2FED4
2023-02-10 10:23:48
Starting Repair Info
Selected phone model:  JAT-L29
Please, put your device in Factory mode (use "ON/OFF Factory Mode" option or Hardware Test Point) and insert USB cable
Detected  MediaTek USB Port_V1633  port
Handshake done
Detecting Chip Version...
HW Chip : MT6765
HW Version : 8A00.CA00.0000.0000
Brom Version: 5
Boot Loader Version: FE
Sending Authentication Data...
Downloading resource...
Downloading resource...
Using MTK_AllInOne_DA_v3.3001.2018/10/18.17:38_452898 download agent...
Found a suitable Download agent
Sending Download Agent...
DA successfully sent
Synchronizing with DA...
Mobile Status: SYNC
Mobile Status: brom
Sending BootLoader Info...
Downloading resource...
Initializing Memory Flash...
Initialization completed
Sending Loader...
Mobile Status: SYNC
Loader successfully sent
Reading Flash Info...
EMMC rpmb size : 16 Mb
EMMC boot1 size : 4 Mb
EMMC boot2 size : 4 Mb
EMMC gp1 size : 0 Mb
EMMC gp2 size : 0 Mb
EMMC gp3 size : 0 Mb
EMMC gp4 size : 0 Mb
EMMC user area size : 29820 Mb
IMEI A:  86*****************
IMEI B:  86*****************
Downloading resource...
New IMEI A: 
New IMEI B:
Creating partition backup:  JAT-L29_nvram_2023-02-10_02-24-49.bin
Repairing Imei A...
Repairing Imei B...
Writing secure data...
Please perform a Factory Data Reset of your device manually through Recovery mode.
Repair Info done.
Performed by  1.3.3  Software version.