- Katılım
- 21 Haz 2018
- Mesajlar
- 11,495
- Tepkime puanı
- 28,076
- Puanları
- 113
Çevrimdışı
Dosya Viplere özeldir
Sitede etkili olan üyelere verilebilir.
DOWNLOAD
Sitede etkili olan üyelere verilebilir.
DOWNLOAD
Kod:
Action : Read Firmware.
Selected 0-By CPU:ELBRUS
Exe version: NCKDongle AndroidMTK 2.6.3
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM_V1632 (Android) (COM4)
Boot mode: Preloader
BBCHIP: 8163 1 cb00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT8163
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 256 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (233Gb+12288Mb) TOSIBA 0x303332473734
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 110100303332473734 : 00000000000000
EMMC UA SIZE: 0x747c00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x748800000 [29.133 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM21)
Build ID: NRD90M
Display ID: MX-1086 Plus_V1.0_20181024
Version: 7.0
Model: MX-1086 Plus
Brand: iNOVA
Device: MX-1086 Plus
Manufacturer: iNOVA
FRP partition: /dev/block/platform/mtk-msdc.0/11230000.MSDC0/by-name/frp
Mediatek Version Release: alps-mp-n0.mp102-V1.6_joyasz8163.tb.n
[0]Warning, nvram posible damaged!!.
Dumping Preloader.
Partition: proinfo
Partition: nvram
Partition: protect1
Partition: protect2
Partition: persist
Partition: seccfg
Partition: lk
Partition: boot
Partition: recovery
Partition: secro
Partition: para
Partition: logo
Partition: expdb
Partition: frp
Partition: tee1
Partition: tee2
Partition: kb
Partition: dkb
Partition: metadata
Partition: system
Partition: cache
Partition: userdata
Partition: flashinfo
Start dumping flash, this can take up to 1 hour.......
Start processing proinfo
Reading: BEGIN: 0x80000 - LEN: 0x300000
Start processing nvram
Start processing protect1 ......
Reading: BEGIN: 0x880000 - LEN: 0xa00000
Start processing protect2 ......
Reading: BEGIN: 0x1280000 - LEN: 0xa00000
Start processing persist ......
Reading: BEGIN: 0x1c80000 - LEN: 0x3000000
Start processing lk
Start processing boot
Start processing recovery
Start processing logo ......
Start processing frp ......
Reading: BEGIN: 0x85a0000 - LEN: 0x100000
Start processing trustzone
Start processing system
Reading: BEGIN: 0xb800000 - LEN: 0xa0000000
Saved to : C:\Users\Admin\Documents\Android_MTK\firmware_backup\MT8163_EMMC_NRD90M__7_0_MX-1086 Plus_iNOVA_2020_03_02_19_08)
Wait untill phone will start charging.
[0]All done.
Moderatör tarafında düzenlendi: