Çözüldü Lenovo A7000-A Read Firmware - NCK

[adnanmirsad56]

Action : Read Firmware.
Selected 0-By CPU:ELBRUS
Exe version: NCKDongle AndroidMTK 2.5.9.9
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM_V1632 (Android) (COM35)
Boot mode: Preloader
BBCHIP: 6752 1 ca01
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6752
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (58Gb+16384Mb) SAMSUNG 0x523758314d42
EMMC FW VERSION: 09:00:00:00:00:00:00:00
EMMC CID: 150100523758314D42 : 00000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2880000 [7.290 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM41)
Build ID: MRA58K
Display ID: A7000-a_S228_160621_ROW
Version: 6.0
Build Date: Tue Jun 21 16:22:10 CST 2016
Model: Lenovo A7000-a
Brand: Lenovo
Device: A7000-a
Manufacturer: LENOVO
Mediatek Version Release: alps-mp-m0.mp1-V2.39_lenovo6752.65.m_P10
Sw Internal Version: A7000-a_USR_S228_1606211600_mp1V2.39_ROW
Dumping Preloader.
Start dumping flash, this can take up to 1 hour.......
Start processing proinfo
Reading: BEGIN: 0x80000 - LEN: 0x300000
Start processing nvram
IMEI[1] from NVRAM: xxxxxxxxxxxxxxx
IMEI[2] from NVRAM: xxxxxxxxxxxxxxx
Start processing protect1 ......
Reading: BEGIN: 0x880000 - LEN: 0xa00000
Start processing protect2 ......
Reading: BEGIN: 0x1280000 - LEN: 0xa00000
Start processing persistent ......
Reading: BEGIN: 0x1c80000 - LEN: 0x80000
Start processing lk ......
Start processing boot
Start processing recovery
Start processing secro
Reading: BEGIN: 0x3da0000 - LEN: 0x600000
Start processing logo ......
Start processing trustzone
Start processing frp ......
Reading: BEGIN: 0x8020000 - LEN: 0x100000
Start processing pad ......
Reading: BEGIN: 0x8120000 - LEN: 0x6e0000
Start processing system
Reading: BEGIN: 0x8800000 - LEN: 0x80000000
Saved to : C:\Users\Admin\Documents\Android_MTK\firmware_backup\MT6752_EMMC_Lenovo_Lenovo A7000-a_6_0_alps-mp-m0_mp1-V2_39_lenovo6752_65_m_P10(2019_11_17_15_50)
Wait untill phone will start charging.
[0]All done.

 

[enescanergndz]

Action : Read Firmware.
Selected 0-By CPU:ELBRUS
Exe version: NCKDongle AndroidMTK 2.5.9.9
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM_V1632 (Android) (COM35)
Boot mode: Preloader
BBCHIP: 6752 1 ca01
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6752
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (58Gb+16384Mb) SAMSUNG 0x523758314d42
EMMC FW VERSION: 09:00:00:00:00:00:00:00
EMMC CID: 150100523758314D42 : 00000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2880000 [7.290 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM41)
Build ID: MRA58K
Display ID: A7000-a_S228_160621_ROW
Version: 6.0
Build Date: Tue Jun 21 16:22:10 CST 2016
Model: Lenovo A7000-a
Brand: Lenovo
Device: A7000-a
Manufacturer: LENOVO
Mediatek Version Release: alps-mp-m0.mp1-V2.39_lenovo6752.65.m_P10
Sw Internal Version: A7000-a_USR_S228_1606211600_mp1V2.39_ROW
Dumping Preloader.
Start dumping flash, this can take up to 1 hour.......
Start processing proinfo
Reading: BEGIN: 0x80000 - LEN: 0x300000
Start processing nvram
IMEI[1] from NVRAM: xxxxxxxxxxxxxxx
IMEI[2] from NVRAM: xxxxxxxxxxxxxxx
Start processing protect1 ......
Reading: BEGIN: 0x880000 - LEN: 0xa00000
Start processing protect2 ......
Reading: BEGIN: 0x1280000 - LEN: 0xa00000
Start processing persistent ......
Reading: BEGIN: 0x1c80000 - LEN: 0x80000
Start processing lk ......
Start processing boot
Start processing recovery
Start processing secro
Reading: BEGIN: 0x3da0000 - LEN: 0x600000
Start processing logo ......
Start processing trustzone
Start processing frp ......
Reading: BEGIN: 0x8020000 - LEN: 0x100000
Start processing pad ......
Reading: BEGIN: 0x8120000 - LEN: 0x6e0000
Start processing system
Reading: BEGIN: 0x8800000 - LEN: 0x80000000
Saved to : C:\Users\Admin\Documents\Android_MTK\firmware_backup\MT6752_EMMC_Lenovo_Lenovo A7000-a_6_0_alps-mp-m0_mp1-V2_39_lenovo6752_65_m_P10(2019_11_17_15_50)
Wait untill phone will start charging.
[0]All done.

Ekli dosyayı görüntüle 8470

Eline Sağlık