- Katılım
- 21 Haz 2018
- Mesajlar
- 11,495
- Tepkime puanı
- 28,078
- Puanları
- 113
Çevrimdışı
Merhaba GSM Turkey Üyeleri bu paylaşacağım konuda Lenovo K4 Note A7010A48 cihazının yazılımı nasıl çekilir onu anlatacağım.
Bu işlemi yapabilmek için elinizde NCK Dongle olması lazım bu araç ücretli bir araçtır ve genellikle cep telefonu tamir yapan yerlerde mevcuttur.
Cihazı kapatıp bağlamanız yeter.
Bu işlemi yapabilmek için elinizde NCK Dongle olması lazım bu araç ücretli bir araçtır ve genellikle cep telefonu tamir yapan yerlerde mevcuttur.
Cihazı kapatıp bağlamanız yeter.
Kod:
Action : Read Firmware.
Selected 0-By CPU:ELBRUS
Exe version: NCKDongle AndroidMTK 2.5.9.9
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM_V1632 (Android) (COM35)
Boot mode: Preloader
BBCHIP: 337 0 ca00
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6753
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (233Gb+16384Mb) SAMSUNG 0x51345a334d42
EMMC FW VERSION: 02:00:00:00:00:00:00:00
EMMC CID: 15010051345A334D42 : 00000000000000
EMMC UA SIZE: 0x747c00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x748800000 [29.133 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM41)
Build ID: MRA58K
Display ID: A7010a48_S230_161129_ROW
Version: 6.0
Model: Lenovo A7010a48
Brand: Lenovo
Device: A7010a48
Manufacturer: LENOVO
Mediatek Version Release: alps-mp-m0.mp1-V2.39.1_lenovo6753.66c.m0_P101
Sw Internal Version: A7010a48_USR_S230_1611292125_mp1V2.39.1_ROW
Dumping Preloader.
Start dumping flash, this can take up to 1 hour.......
Start processing proinfo
Reading: BEGIN: 0x80000 - LEN: 0x300000
Start processing nvram
IMEI[1] from NVRAM: xxxxxxxxxxxxxxxxx
IMEI[2] from NVRAM: xxxxxxxxxxxxxxxxx
Start processing protect1 ......
Reading: BEGIN: 0x880000 - LEN: 0xa00000
Start processing protect2 ......
Reading: BEGIN: 0x1280000 - LEN: 0xa00000
Start processing lk ......
Start processing boot
Start processing recovery
Start processing logo ......
Start processing secro
Reading: BEGIN: 0x5200000 - LEN: 0x600000
Start processing trustzone
Start processing persist ......
Reading: BEGIN: 0x7400000 - LEN: 0x3000000
Start processing efuse ......
Reading: BEGIN: 0xa400000 - LEN: 0x80000
Start processing frp ......
Reading: BEGIN: 0xa480000 - LEN: 0x100000
Start processing nvdata ......
Reading: BEGIN: 0xa580000 - LEN: 0x2000000
Start processing preload ......
Reading: BEGIN: 0xe580000 - LEN: 0x20280000
Start processing system
Reading: BEGIN: 0x2e800000 - LEN: 0xa0000000
Saved to : C:\Users\Admin\Documents\Android_MTK\firmware_backup\MT6753_EMMC_Lenovo_Lenovo A7010a48_6_0_alps-mp-m0_mp1-V2_39_1_lenovo6753_66c_m0_P101(2019_11_09_10_08)
Wait untill phone will start charging.
[0]All done.
Moderatör tarafında düzenlendi: