braveturks
Üye
- Katılım
- 21 Haz 2018
- Mesajlar
- 682
- Tepkime puanı
- 2,633
- Puanları
- 93
Çevrimdışı
Lenovo K5 Plus Root, nasıl yapılır kısa ve öz olarak göz atalım. Telefonların işlemci mimarisine ve işletim sistemine göre root yapma teknikleri farklılık göstermektedir. Burada paylaşacağım Root sadece Lenovo K5 Plus için geçerlidir.
Bilişsel Hazırbulunuşluk Şartları:
1. Activate the Developer options (Settings> About phone> Device Information> to tap 7 times in Build number)
2. Enable USB debugging (Settings> Developer> USB Debugging)
3. Enable OEM unlock (Settings> Developer> Unlock OEM)
4. Connect the phone with the USB cable to the computer
5. Install the drivers that come on the CD cell partition.
6. Install "Minimal adb and FlashBoot" (if not already installed).
7. Download the TWRP recovery created by @Shreps, and copy it to the folder where abd is installed.
8. Run the Minimal adb and FlashBoot program or open the command line in the folder where the abd installed.
9. Run the command "adb devices" to confirm the connection. If you have never done before in this cell, the cell must confirm the adb connection.
10. When the adb confirm the connection, run the "adb reboot bootloader" Fastboot command to enable the functionality.
11. If you want a temporary recovery run the "fastboot boot twrp-k5-3.0.2-r3_scritch007.img" command. If you want to permanently run the "fastboot flash recovery twrp-k5-3.0.2-r3_scritch007.img" command.
12. You can now use the TWRP recovery in the K5 / K5 plus!
Bilişsel Hazırbulunuşluk Şartları:
- Root kavramını açıklayabilme,
- Fastboot - Download Mode kavramlarını açıklayabilme,
- Fastboot, ADB komutlarını çalıştırabilme,
- Custom Recovery kavramını açıklayabilme,
- Custom Recovery üzerinden .zip dosyası yükleyebilme,
- Olası komplikasyonlara karşın Stock Rom yükleyebilme
- Elbette, temel Windows yeterliliklerine sahip olma
- Lenovo sürücüleri yüklenmiş bilgisayar
- Data aktarımı nitelikli kablo
- ADB Sürücüleri, (minimal adb tool olabilir)
- Cusrom recovery ve supersu dosyaları
1. Activate the Developer options (Settings> About phone> Device Information> to tap 7 times in Build number)
2. Enable USB debugging (Settings> Developer> USB Debugging)
3. Enable OEM unlock (Settings> Developer> Unlock OEM)
4. Connect the phone with the USB cable to the computer
5. Install the drivers that come on the CD cell partition.
6. Install "Minimal adb and FlashBoot" (if not already installed).
7. Download the TWRP recovery created by @Shreps, and copy it to the folder where abd is installed.
8. Run the Minimal adb and FlashBoot program or open the command line in the folder where the abd installed.
9. Run the command "adb devices" to confirm the connection. If you have never done before in this cell, the cell must confirm the adb connection.
10. When the adb confirm the connection, run the "adb reboot bootloader" Fastboot command to enable the functionality.
11. If you want a temporary recovery run the "fastboot boot twrp-k5-3.0.2-r3_scritch007.img" command. If you want to permanently run the "fastboot flash recovery twrp-k5-3.0.2-r3_scritch007.img" command.
12. You can now use the TWRP recovery in the K5 / K5 plus!