- Katılım
- 21 Haz 2018
- Mesajlar
- 11,482
- Tepkime puanı
- 28,049
- Puanları
- 113
Çevrimdışı
Merhaba GSM Turkey Üyeleri bu paylaşacağım konuda Lenovo Moto E4 Plus XT1771 cihazının yazılımı nasıl çekilir onu anlatacağım.
Bu işlemi yapabilmek için elinizde NCK Dongle olması lazım. Bu araç ücretli bir araçtır ve genellikle cep telefonu tamir yapan yerlerde mevcuttur.
NCK Dongle Android MTK Tool'u açın ve Dump Firmware tıklayın. Cihazı kapatın 10 saniye bekleyin sonra kapalı şekilde sağlam bir usb kablo ile pc'ye bağlayın.
Bu işlemi yapabilmek için elinizde NCK Dongle olması lazım. Bu araç ücretli bir araçtır ve genellikle cep telefonu tamir yapan yerlerde mevcuttur.
NCK Dongle Android MTK Tool'u açın ve Dump Firmware tıklayın. Cihazı kapatın 10 saniye bekleyin sonra kapalı şekilde sağlam bir usb kablo ile pc'ye bağlayın.
Kod:
Action : Read Firmware.
Selected 0-By CPU:ELBRUS
Exe version: NCKDongle AndroidMTK 2.6.3
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM_V1632 (Android) (COM35)
Boot mode: Preloader
BBCHIP: 335 0 ca00
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6737M
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 3 GB DRAM
----------------------------------------------------
EMMC: (116Gb+24576Mb) SAMSUNG 0x524531424d42
EMMC FW VERSION: 0d:00:00:00:00:00:00:00
EMMC CID: 150100524531424D42 : 00000000000000
EMMC UA SIZE: 0x3a3e00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3a4a00000 [14.572 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM41)
Build ID: NMA26.42-162
Version: 7.1.1
Build Date: Sun Jul 29 23:49:51 CDT 2018
Model: Moto E (4) Plus
Brand: motorola
Device: nicklaus
Manufacturer: motorola
FRP partition: /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/frp
Mediatek Version Release: alps-mp-n1.mp1-V1_lenovo6737m.35.n1_P121
Phone have OTP partition.
IMEI[1]: xxxxxxxxxx
IMEI[2]: xxxxxxxxxx
Dumping Preloader.
Partition: proinfo
Partition: nvram
Partition: protect1
Partition: protect2
Partition: lk
Partition: para
Partition: boot
Partition: recovery
Partition: logo
Partition: expdb
Partition: seccfg
Partition: oemkeystore
Partition: secro
Partition: keystore
Partition: tee1
Partition: tee2
Partition: persist
Partition: efuse
Partition: utags
Partition: frp
Partition: nvdata
Partition: metadata
Partition: hw
Partition: oem
Partition: system
Partition: cache
Partition: userdata
Partition: otp
Partition: flashinfo
Start dumping flash, this can take up to 1 hour.......
Start processing proinfo
Reading: BEGIN: 0x80000 - LEN: 0x300000
Start processing nvram
IMEI[1] from NVRAM: xxxxxxxxxx
IMEI[2] from NVRAM: xxxxxxxxxx
Start processing protect1 ......
Reading: BEGIN: 0x880000 - LEN: 0xa00000
Start processing protect2 ......
Reading: BEGIN: 0x1280000 - LEN: 0xa00000
Start processing lk
Start processing boot
Start processing recovery
Start processing logo ......
Start processing secro secro.img
Reading: BEGIN: 0x5380000 - LEN: 0x600000
Start processing trustzone
Start processing persist ......
Reading: BEGIN: 0x6b80000 - LEN: 0x3000000
Start processing frp ......
Reading: BEGIN: 0x9c80000 - LEN: 0x100000
Start processing nvdata ......
Reading: BEGIN: 0x9d80000 - LEN: 0x2000000
Start processing system
Reading: BEGIN: 0x1e800000 - LEN: 0xc0000000
Saved to : C:\Users\Admin\Documents\Android_MTK\firmware_backup\MT6737M_EMMC_NMA26_42-162__7_1_1_Moto E (4) Plus_motorola_2019_12_28_19_21)
Wait untill phone will start charging.
[0]All done.
Moderatör tarafında düzenlendi: