Çözüldü Lenovo Tab 2 A7-30H Read Firmware

[silivriserdar]

Merhaba gsmturkey.net üyeleri bu paylaşacağım konuda Lenovo Tab 2 A7-30H cihazının yazılımı nasıl çekilir onu anlatacağım.

Bu işlemi yapabilmek için elinizde NCK Dongle olması lazım. Bu araç ücretli bir araçtır ve genellikle cep telefonu tamir yapan yerlerde mevcuttur.

NCK Dongle Android MTK Tool'u açın ve Backup kısmından Dump Firmware basın.

Cihazı kapalı şekilde sağlam bir usb kablo ile pc'ye bağlayın. Yazılımı çekmeye başlayacaktır.

 Action : Read Firmware.
Selected 0-By CPU:MT6572
Exe version: NCKDongle AndroidMTK 2.5.9.8
Reinsert phone battery. 
Battery must be charged.
Phone must be off with battery inside. 
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM14)
Boot mode: Preloader
BBCHIP: 6572 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6572
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (28Gb+4096Mb) HYNIX 0x2058494e5948 
EMMC FW VERSION: 16:00:00:00:00:00:00:00
EMMC CID: 90014A2058494E5948 : 00000000000000
EMMC UA SIZE: 0xe7000000 
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe7600000 [3.615 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM15)
Build ID: JDQ39
Display ID: ALPS.JB3.MP.V1
Version: 4.2.2
Model: 6s Plus
Brand: iPhone
Device: e165_jb3
Manufacturer: iPhone 6s Plus
Region: US
Mediatek Version Release: ALPS.JB3.MP.V1
Dumping Preloader.
Start dumping flash, this can take up to 1 hour.......
Start processing PRELOADER ......
Reading: BEGIN: 0x0 - LEN: 0x600000 
Start processing MBR
Reading: BEGIN: 0x600000 - LEN: 0x200 
Start processing EBR1
Reading: BEGIN: 0x680000 - LEN: 0x200 
Start processing proinfo
Reading: BEGIN: 0x700000 - LEN: 0x300000 
Start processing nvram
IMEI[1] from NVRAM: 358123011815358
IMEI[2] from NVRAM: 358123011815358
Start processing PROTECT_F
Reading: BEGIN: 0xf00000 - LEN: 0xa00000 
Start processing PROTECT_S
Reading: BEGIN: 0x1900000 - LEN: 0xa00000 
Start processing UBOOT ......
Start processing BOOTIMG 
Start processing RECOVERY 
Start processing secro
Reading: BEGIN: 0x2f80000 - LEN: 0x40000 
Start processing LOGO ......
Start processing system
Reading: BEGIN: 0x3d40000 - LEN: 0x28a00000 
Saved to : C:\Users\MSI\Documents\Android_MTK\firmware_backup\MT6572_EMMC_iPhone_6s Plus_4_2_2_ALPS_JB3_MP_V1(2019_02_25_17_27)
Wait untill phone will start charging.
[0]All done.