silivriserdar
Genel Moderator
- Katılım
- 21 Haz 2018
- Mesajlar
- 21,983
- Tepkime puanı
- 44,656
- Puanları
- 113
- Yaş
- 40
Çevrimdışı
Merhaba GSM Turkey Üyeleri bu paylaşacağım konuda LG K20 VS501 cihazına nasıl IMEI repair işlemi yapılır onu anlatacağım.
Bu işlemi yapabilmek için elinizde Octopus/Octoplus Box LG Aktivasyonu olması lazım. Bu araç ücretli bir araçtır ve genellikle cep telefonu tamir yapan yerlerde mevcuttur.
Bu işlemi yapabilmek için elinizde Octopus/Octoplus Box LG Aktivasyonu olması lazım. Bu araç ücretli bir araçtır ve genellikle cep telefonu tamir yapan yerlerde mevcuttur.
Kod:
Welcome to Octoplus/Octopus Box LG Software version 3.0.0
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM162
Selected model: VS501
Reading info...
Could not detect mode!
Performed by 3.0.0 Software version.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM162
Selected model: VS501
Reading info...
Model ID: VS501
IMEI:
Android version: 7.0
Battery level: 100%
Trying to enable Diagnostics ports...
Found model VS50119A:ÿ° at port COM162
Fixing IMEI...
New IMEI:
Reading QCN...
Send SPC...OK
Reading Mobile Property...OK
Reading Feature Mask...OK
Reading Roaming List 0...OK
Reading NV_Numbered Items...OK
Reading NV_Numbered SIM1 Items...OK
Reading NV_Numbered SIM2 Items...OK
Reading NV Items...OK
Reading EFS...OK
Reading Provisioning Items...OK
Reading QCN done!
Backup saved to "VS501_355275085863_11-03-2020_17-15-
26.qcn"
Switching to Download mode...OK
Initializing flash...OK
Reading partitions...OK
Detecting writing method...
LAF Error: 80000121.
Trying second method...
Trying third method...OK
Reading security area...OK
Backup saved to "VS501_355275085863_11-03-2020_17-21-
53.SEC"
Writing security area...OK
Switching to Normal mode...
Trying to enable Diagnostics ports...Failed!
Trying to enable Diagnostics ports...
Initializing ADB...OK
Waiting for phone...Failed!
Please, reconnect phone, enable USB debugging, and try again.
To enable USB debugging, please perform the following steps:
1. Disconnect cable
2. Install LG Android ADB drivers
3. Go to "Settings" -> "About phone" -> "Software information"
4. Click on Build number 5 times
5. Enable "Settings" -> "Developer options" -> "USB debugging"
option
6. Connect the cable and check, whether ADB interface has
appeared in PC Device Manager.
Please perform the following steps:
1. Disconnect cable
2. Put phone into Normal mode manually
3. Connect USB cable to then phone
4. Press "Ok" button
Trying to enable Diagnostics ports...Failed!
Trying to enable Diagnostics ports...
Initializing ADB...OK
Waiting for phone...OK
Diagnostics ports are enbled!
Switching to Serial Port...
Found model VS50119A*ÿ° at port COM162
Send SPC...OK
Writing QCN...
Writing NV_Numbered Items...OK
Writing NV_Numbered SIM1 Items...OK
Writing NV_Numbered SIM2 Items...OK
Writing QCN done!
IMEI successfully fixed!
Rebooting phone...
Performed by 3.0.0 Software version.