Çözüldü LG X View K500DS IMEI Repair İşlemi

[Mardanov.T]

LG friends, LG X view K500ds

Android Version: Android 6

You need the Octoplus LG Tool to do this operation. This tool is a paid tool

Note: Change the number of communication tools is legal.
Please use the original imei phone numbers!

 Welcome to Octoplus / Octopus Box LG Software version 2.9.7.01
-------------------------------------------------- ------------------------------
Checking data ... OK
Platform: LG Qualcomm
Selected port: COM132
Selected model: K500DS
Reading info ...
Model ID: LG-K500ds
IMEI: 357741-22-******-*
Android version: 6.0.1
Battery level: 77%
Mode: Normal
Firmware compiled date: Apr 27 2016
Firmware compiled time: 07:00:00
Firmware released date: May 10 2016
Firmware released time: 17:15:21
SW Version: MPSS.DPM.2.0.c11-00058-M8936FAAAANUZM-4.49899.1.53954.1
IMEI: 357741-22-******-*
IMEI B: 357741-22-******-*
SPC: 000000
Fixing IMEI ...
New IMEI A: 355663-09-******-*
New IMEI B: 355663-09-******-*
Reading QCN ...
Send SPC ... OK
Reading Mobile Property ... OK
Reading Feature Mask ... OK
Reading Roaming List 0 ... OK
Reading NV_Numbered Items ... OK
Reading NV_Numbered SIM1 Items ... OK
Reading NV_Numbered SIM2 Items ... OK
Reading NV Items ... OK
Reading EFS ... OK
Reading Provisioning Items ... OK
Reading QCN done!
Backup saved to "K500DS_357741*********_24-12-2019_14-37-03.qcn"
Do you want to create security backup?
Switching to Download mode ... OK
Initializing flash ... OK
Reading partitions ... OK
Detecting writing method ... OK
Reading security area ... OK
Backup saved to "K500DS_35774******_24-12-2019_14-42-38.SEC"
Switching to Normal mode ...
Found model EAAAANUZ: ÿd at port COM132
Writing security area ... OK
Rebooting phone ...
Trying to enable Diagnostics ports ... Failed!
Trying to enable Diagnostics ports ...
Initializing ADB ... OK
Waiting for phone ...
Please, reconnect phone, enable USB debugging, and try again.
To enable USB debugging, please perform the following steps:
1. Disconnect cable
2. Install LG Android ADB drivers
3. Go to "Settings" -> "About phone" -> "Software information"
4. Click on Build number 5 times
5. Enable "Settings" -> "Developer options" -> "USB debugging" option
6. Connect the cable and check the PC Device Manager.
Please perform the following steps:
1. Disconnect cable
2. Put phone into Normal mode manually
3. Connect USB cable to then phone
4. Press "Ok" button
Trying to enable Diagnostics ports ... Failed!
Trying to enable Diagnostics ports ...
Initializing ADB ... OK
Waiting for phone ...
Please, reconnect phone, enable USB debugging, and try again.
To enable USB debugging, please perform the following steps:
1. Disconnect cable
2. Install LG Android ADB drivers
3. Go to "Settings" -> "About phone" -> "Software information"
4. Click on Build number 5 times
5. Enable "Settings" -> "Developer options" -> "USB debugging" option
6. Connect the cable and check, whether the ADB interface has appeared in PC Device Manager.OK
Diagnostics ports are enbled!
Switching to Serial Port ...
Found model EAAAANUZ: ÿd at port COM132
FINALIZING ... OK
IMEI successfully fixed!
Rebooting phone ...
Performed by 2.9.7.01 Software version.