Bilgi Nokia 3 TA-1020 Read Firmware

adnanmirsad56

FREE PALESTINE
Genel Moderator
Katılım
21 Haz 2018
Mesajlar
11,482
Tepkime puanı
28,050
Puanları
113
Çevrimdışı
Merhaba GSM Turkey Üyeleri bu paylaşacağım konuda Nokia 3 TA-1020 cihazının yazılımı nasıl çekilir onu anlatacağım.

Bu işlemi yapabilmek için elinizde NCK Dongle olması lazım. Bu araç ücretli bir araçtır ve genellikle cep telefonu tamir yapan yerlerde mevcuttur.

Dump Firmware tıklayın ve cihazı kapalı şekilde bağlayın.


Kod:
Action : Read Firmware.
 Selected 0-By CPU:ELBRUS
 Exe version: NCKDongle AndroidMTK 2.5.9.9
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM_V1632 (Android) (COM35)
 Boot mode: Preloader
 BBCHIP: 335 0 ca00
 Using Algo 2.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6737M
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 02
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 2 GB  DRAM
 ----------------------------------------------------
 EMMC: (117Gb+16384Mb) UNKNOWN_EMMC_DEVICE 
 EMMC FW VERSION: 10:00:00:00:00:00:00:00
 EMMC CID: 13014E51324A393652 : 00000000000000
 EMMC UA SIZE: 0x3ab400000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3ac000000      [14.688 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM41)
 Build ID: PPR1.180610.011
 Display ID: 00WW_5_180
 Version: 9
 Build Date: Wed Sep 25 21:52:50 CST 2019
 Model: NE1
 Brand: alps
 Device: NE1
 Manufacturer: alps
 Dumping Preloader.
 Start dumping flash, this can take up to 1 hour.......
 Start processing proinfo
 Reading:  BEGIN: 0x80000          - LEN: 0x300000        
 Start processing nvram
 IMEI[1] from NVRAM: xxxxxxxxxxxxxxx
 IMEI[2] from NVRAM: xxxxxxxxxxxxxxx
 Start processing protect1 ......
 Reading:  BEGIN: 0x880000         - LEN: 0xa00000        
 Start processing protect2 ......
 Reading:  BEGIN: 0x1280000        - LEN: 0xa00000        
 Start processing lk ......
 Start processing boot 
 Start processing recovery 
 Start processing logo ......
 Start processing secro
 Reading:  BEGIN: 0x5200000        - LEN: 0x600000        
 Start processing trustzone
 Start processing box ......
 Reading:  BEGIN: 0x6a00000        - LEN: 0x800000        
 Start processing sys_info ......
 Reading:  BEGIN: 0x7200000        - LEN: 0x100000        
 Start processing sutinfo ......
 Reading:  BEGIN: 0x7300000        - LEN: 0x20000         
 Start processing hidden ......
 Reading:  BEGIN: 0x7320000        - LEN: 0x2000000       
 Start processing cda ......
 Reading:  BEGIN: 0x9320000        - LEN: 0x800000        
 Start processing frp ......
 Reading:  BEGIN: 0x9b20000        - LEN: 0x100000        
 Start processing nvdata ......
 Reading:  BEGIN: 0x9c20000        - LEN: 0x2000000       
 Start processing system
 Reading:  BEGIN: 0xe000000        - LEN: 0x100000000     
 Saved to : C:\Users\Admin\Documents\Android_MTK\firmware_backup\MT6737M_EMMC_alps_NE1_9_2019_11_18_17_47)
 Wait untill phone will start charging.
 [0]All done.[/B]


[ATTACH=full]8505[/ATTACH]
 

Ekli dosyalar

  • Screenshot_1.png
    Screenshot_1.png
    62.3 KB · Görüntüleme: 45
Moderatör tarafında düzenlendi:
Action : Read Firmware.
Selected 0-By CPU:ELBRUS
Exe version: NCKDongle AndroidMTK 2.5.9.9
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM_V1632 (Android) (COM35)
Boot mode: Preloader
BBCHIP: 335 0 ca00
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6737M
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 02
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (117Gb+16384Mb) UNKNOWN_EMMC_DEVICE
EMMC FW VERSION: 10:00:00:00:00:00:00:00
EMMC CID: 13014E51324A393652 : 00000000000000
EMMC UA SIZE: 0x3ab400000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3ac000000 [14.688 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM41)
Build ID: PPR1.180610.011
Display ID: 00WW_5_180
Version: 9
Build Date: Wed Sep 25 21:52:50 CST 2019
Model: NE1
Brand: alps
Device: NE1
Manufacturer: alps
Dumping Preloader.
Start dumping flash, this can take up to 1 hour.......
Start processing proinfo
Reading: BEGIN: 0x80000 - LEN: 0x300000
Start processing nvram
IMEI[1] from NVRAM: xxxxxxxxxxxxxxx
IMEI[2] from NVRAM: xxxxxxxxxxxxxxx
Start processing protect1 ......
Reading: BEGIN: 0x880000 - LEN: 0xa00000
Start processing protect2 ......
Reading: BEGIN: 0x1280000 - LEN: 0xa00000
Start processing lk ......
Start processing boot
Start processing recovery
Start processing logo ......
Start processing secro
Reading: BEGIN: 0x5200000 - LEN: 0x600000
Start processing trustzone
Start processing box ......
Reading: BEGIN: 0x6a00000 - LEN: 0x800000
Start processing sys_info ......
Reading: BEGIN: 0x7200000 - LEN: 0x100000
Start processing sutinfo ......
Reading: BEGIN: 0x7300000 - LEN: 0x20000
Start processing hidden ......
Reading: BEGIN: 0x7320000 - LEN: 0x2000000
Start processing cda ......
Reading: BEGIN: 0x9320000 - LEN: 0x800000
Start processing frp ......
Reading: BEGIN: 0x9b20000 - LEN: 0x100000
Start processing nvdata ......
Reading: BEGIN: 0x9c20000 - LEN: 0x2000000
Start processing system
Reading: BEGIN: 0xe000000 - LEN: 0x100000000
Saved to : C:\Users\Admin\Documents\Android_MTK\firmware_backup\MT6737M_EMMC_alps_NE1_9_2019_11_18_17_47)
Wait untill phone will start charging.
[0]All done.



Ekli dosyayı görüntüle 8505
@Cvt abi sendeki telefon değil mi?
 
  • Beğen
Tepkiler: Cvt
Evet aynen bu cihazdan susturdum :s
 
hacı çektiğin yazılımı banada atarmısın sana zahmeet
 
Başkan bu hata kodunu alıyorum .ne yapabilirim???
hata kodu.jpg
 
valla brick gibi duruyor cihaz.resime bak 3 farklı versiyondan aldım attım ama nafile.
nokia3 hata kodu.jpg
 
Auth Dosyasını Atamamıssınız Boxsun verdigi Hata Bu Auth dosyasını Desteklememesi
Yazilimi Yüklerken en Yüksek Versiyonla Auth Dosyasını seçerek Komple Flashlamayı Deneyin.
iyide auth dosyası yok ki nerden bulup atıcam anlamadım???
 
ustam ellerıne saglık link verebılırmısınız
 
Geri
Üst Alt