Çözüldü OPPO A5 2020 CPH1931 İçindekiler Silinmeden Desen Kilidi Kırma

silivriserdar

Genel Moderator
Katılım
21 Haz 2018
Mesajlar
21,971
Tepkime puanı
44,594
Puanları
113
Yaş
40
Çevrimdışı
Merhaba GSM Turkey Üyeleri bu paylaşacağım konuda Oppo A5 2020 CPH1931 İçindekiler Silinmeden Desen Kilidi Kırma nasıl yapılır onu anlatacağım.

Bu işlemi yapabilmek için elinizde Easy Jtag olması lazım. Bu araç ücretli bir araçtır ve genellikle cep telefonu tamir yapan yerlerde mevcuttur.

Kod:
 EasyJtag Suite Classic ver.: 3.7.0.20 / wxWidgets 3.1.3-W-U started.
OS ver.: Windows 10 (build 19041), 64-bit edition. Admin rights OK
Autorun Agent ver:1.0.0.0
Crash Reporting ver:1.4.0.3
EasyJTAG SPI Plugin ver:1.1.1.13
Android ADB API ver:2.0.0.0
FTDI API ver:3.2.4.0
LibUSB API ver:1.2.6.0
Visual C++ Runtime ver:10.0.30319.1
Setting box Pinout ...

Box Drivers version: 3.0.0.0
Z3X Card Serial : AA22-A782 , ver: 22 
Z3X Card Activation [JTAGPLUS] : ACTIVATED
Z3X Card Activation [LG] : NOT ACTIVATED
Z3X Card Activation [SAMS] : NOT ACTIVATED
Z3X Card Activation [JTAG] : ACTIVATED


For more information press F1 to open local help or visit our wiki

Found 4 serial devices
COM12 USB\VID_05C6&PID_9008&REV_0000 Qualcomm HS-USB QDLoader 9008 (COM12)
COM1 ACPI\VEN_PNP&DEV_0501 İletişim Bağlantı Noktası (COM1)
COM16 FTDIBUS\COMPORT&VID_0403&PID_6001 USB Serial Port (COM16)
COM2 USB\VID_1781&PID_AAAC&REV_0100&MI_00 Easy Jtag Plus Control Port (COM2)
Selected pinout: GEN2 ISP Pinout
Change EasyJTAG Pinout OK
Z3X EasyJtag Software ver. 3.7.0.20
Loading eMMC GEN2 Firmware... IO: 2200 mV
Box S/N: 227927EFF1542B9A, ,FW Ver.: 02.53
CMD Pullup Level:1967 mV
CMD Active Level:2099 mV
Box IO Level:2200 mV
CLK Rate:24000 kHz
Bus Width:1bit,SDR
HiPower mode is off!
Can't init device, Reason: CARD Ready Timeout Error 
Done.

Z3X EasyJtag Software ver. 3.7.0.20
Loading eMMC GEN2 Firmware... IO: 2400 mV
Box S/N: 227927EFF1542B9A, ,FW Ver.: 02.53
CMD Pullup Level:2012 mV
CMD Active Level:2155 mV
Box IO Level:2400 mV
CLK Rate:24000 kHz
Bus Width:1bit,SDR
HiPower mode is off!
---------- eMMC Device Information ----------

eMMC CID : 90014A68433861503E0350870D809629
eMMC CSD : D02700328F5903FFFFFFFFEF8E400043
eMMC Manufacturer ID: 0090 , OEM ID: 014A
eMMC Date: 09/2019 Rev.0x3
eMMC NAME: hC8aP> , S/N: 1351028096
eMMC NAME (HEX): 68433861503E 
EMMC ROM1 (Main User Data) Capacity: 59640 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 kB
EMMC RPMB is programmed and written 95736 times
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG: 0x38] Boot from:ROM1 (Main User Area)
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x38.
H/W reset function [RST_N_FUNCTION]: 0x01
High-capacity WP group size [HC_WP_GRP_SIZE: 0x00004000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: hC8aP>_1351028096_20210324_1739.extcsd
The protective MBR's 0xEE partition is oversized! Auto-repairing.
Found valid GPT with protective MBR; using GPT.
Real (Hardware) Disk/Image size: 747C000 sectors 58.2 GiB 
Soft (Partitioned) Disk/Image size: 747BFBC sectors 58.2 GiB 
Disk identifier (GUID): 8ADD33C3-83A0-9889-6823-EBA2DECFC7F9
Logical sector size: 0x200 bytes ,First/Last usable sector: 34,122142686
Partition info successfully found
------ Android information ------
Detected LINUX(Android) SYSTEM : 0x00A0020000 (6.246GB)
Short EXT fs info:
Size: 6.147GB
Block size: 4.0KB
Inode size: 256
Inodes: 403200
Short Android info:
Unable to read prop.plist , code : 2
---------------------------------------------
Detected USERDATA USERDATA : 0x02A4020000 (47.678GB)
Unable to mount USERDATA , code : 95
Userdata Superblock contents::
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ................................;
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ................................;
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ................................;
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ................................;
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ................................;
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ................................;
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ................................;
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ................................;
Done.

Checking security ...
Z3X EasyJtag Software ver. 3.7.0.20
Loading eMMC GEN2 Firmware... IO: 2400 mV
Box S/N: 227927EFF1542B9A, ,FW Ver.: 02.53
CMD Pullup Level:2010 mV
CMD Active Level:2158 mV
Box IO Level:2400 mV
CLK Rate:24000 kHz
Bus Width:1bit,SDR
HiPower mode is off!
---------- eMMC Device Information ----------

eMMC CID : 90014A68433861503E0350870D809629
eMMC CSD : D02700328F5903FFFFFFFFEF8E400043
eMMC Manufacturer ID: 0090 , OEM ID: 014A
eMMC Date: 09/2019 Rev.0x3
eMMC NAME: hC8aP> , S/N: 1351028096
eMMC NAME (HEX): 68433861503E 
EMMC ROM1 (Main User Data) Capacity: 59640 MB , 0x747C000 pages , 0xE8F800000 bytes
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 kB
EMMC RPMB is programmed and written 95736 times
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG: 0x38] Boot from:ROM1 (Main User Area)
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x38.
H/W reset function [RST_N_FUNCTION]: 0x01
High-capacity WP group size [HC_WP_GRP_SIZE: 0x00004000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Writing Recovery Command to MISC (50)
Done.
 
Sadece Resimler ve Videolar Kalıyor. Rehber ve diğer belgeleriniz siliniyor. Bilginize...
İşlem videosu :


 
Geri
Üst Alt