Çözüldü Oppo A93 CPH2123 Factory Reset

silivriserdar

Genel Moderator
Katılım
21 Haz 2018
Mesajlar
21,967
Tepkime puanı
44,617
Puanları
113
Yaş
40
Çevrimdışı
Merhaba GSM Turkey Üyeleri bu paylaşacağım konuda Oppo A93 CPH2123 cihazına nasıl format atılır onu anlatacağım.

Bu cihaza format atmak için içini açmanız lazım. İçini açıp Easy Jtag ile işlem yapabilirsiniz. Bu araç ücretli bir araçtır ve genellikle cep telefonu tamir yapan yerlerde mevcuttur.

OPPO cihazlarının desen kilidi ve format gibi sorunlarını çözüyoruz. Sitemiz WhatsApp veya Telegram adresine mesaj atmanız yeterlidir.

Lütfen konu altına yorum yaparken Teşekkürler, Elinize sağlık, süper, sağol, helal olsun gibi kelimeler yazıp konuları kirletmeyelim. Herkes aradığını bu mesajlar yüzünden bulamıyor. Altta beğen butonuna basmanız yeterlidir. Konu ile ilgili sorununuzu veya çözümünüz varsa yorum yapın. Konu ile alakasız cevaplar silinecektir.

Kod:
Z3X EasyJtag Software ver. 3.7.0.20
UFS Socket Info.
Serial: 0123A0FFD277A6BFEE 
Description: EasyJTAG UFS Socket 3 in 1 by MOORC 07.11.20

Identify UFS Chip.
UFS Chip Voltage: Low
VCC: 3256mV
VCCQ2: 1900mV

Chip Info:
Manufacturer: SAMSUNG
ProductName: KM8V8001JM-B813
SerialNumber: 48fad39ce41e
OemID: SAMSUNG_OEM_ID
Firmware Version: 1.9.0.0
UFS Version: 2.1

Maximum Number of LUs: 8
Number of LUs found: 6
   LUN 0:
      Block size: 0x1000
      Size: 0x1D3D800000 / 116,984,000,000B / 116GB
   LUN 1 (Boot A):
      Block size: 0x1000
      Size: 0x800000 / 0,008,000,000B / 8MB
   LUN 2 (Boot B):
      Block size: 0x1000
      Size: 0x800000 / 0,008,000,000B / 8MB
   LUN 3:
      Block size: 0x1000
      Size: 0x8000000 / 0,128,000,000B / 128MB
   LUN 4:
      Block size: 0x1000
      Size: 0x73C00000 / 1,828,000,000B / 1GB
   LUN 5:
      Block size: 0x1000
      Size: 0x10400000 / 0,260,000,000B / 260MB
Number of W-LUs found: 1
   W-LUN 0xC4 (REPORT LUNS):
      Block size: 0x100
      Size: 0x1000000 / 0,016,000,000B / 16MB
Full size: 0x1DCC800000 / 119,200,000,000B / 119GB

Health:
 Device life time method A: 0x01 (0%-10% device life time used)
 Device life time method B: 0x01 (0%-10% device life time used)
 Pre End of Life: 0x01 (Used less then 80% of reserved blocks)

Checking LU0 for partitioning
LUN0 Have 11 partitions
LUN1 Have 2 partitions
LUN2 Have 0 partitions
LUN3 Have 5 partitions
LUN4 Have 43 partitions
LUN5 Have 11 partitions
------ Detected 72 partitions ------
LUN0 (SSD) [0x6000 0x2000] Size: 8.0KB
LUN0 (PERSIST) [0x8000 0x2000000] Size: 32.0MB
LUN0 (MISC) [0x2008000 0x100000] Size: 1.0MB
LUN0 (KEYSTORE) [0x2108000 0x80000] Size: 512.0KB
LUN0 (FRP) [0x2188000 0x80000] Size: 512.0KB
LUN0 (CACHE) [0x2208000 0x1c000000] Size: 448.0MB
LUN0 (RECOVERY) [0x1e208000 0x6000000] Size: 96.0MB
LUN0 (METADATA) [0x24208000 0x1000000] Size: 16.0MB
LUN0 (ODM) [0x25208000 0x10000000] Size: 256.0MB
LUN0 (SUPER) [0x35208000 00000] Size: 9.500GB
LUN0 (USERDATA) [0x295208000 0] Size: 0.0B
LUN1 (XBL) [0x6000 0x380000] Size: 3.500MB
LUN1 (XBL_CONFIG) [0x386000 0x20000] Size: 128.0KB
LUN3 (ALIGN_TO_128K_1) [0x6000 0x1a000] Size: 104.0KB
LUN3 (CDT) [0x20000 0x20000] Size: 128.0KB
LUN3 (DDR) [0x40000 0x100000] Size: 1.0MB
LUN3 (CDT_ENGINEERING) [0x140000 0x100000] Size: 1.0MB
LUN3 (OCDT) [0x240000 0x20000] Size: 128.0KB
LUN4 (AOP) [0x6000 0x80000] Size: 512.0KB
LUN4 (TZ) [0x86000 0x400000] Size: 4.0MB
LUN4 (HYP) [0x486000 0x80000] Size: 512.0KB
LUN4 (MODEM) [0x506000 0x8c00000] Size: 140.0MB
LUN4 (BLUETOOTH) [0x9106000 0x100000] Size: 1.0MB
LUN4 (MDTPSECAPP) [0x9206000 0x400000] Size: 4.0MB
LUN4 (MDTP) [0x9606000 0x2000000] Size: 32.0MB
LUN4 (ABL) [0xb606000 0x100000] Size: 1.0MB
LUN4 (DSP) [0xb706000 0x2000000] Size: 32.0MB
LUN4 (KEYMASTER) [0xd706000 0x80000] Size: 512.0KB
LUN4 (BOOT) [0xd786000 0x4000000] Size: 64.0MB
LUN4 (CMNLIB) [0x11786000 0x80000] Size: 512.0KB
LUN4 (CMNLIB64) [0x11806000 0x80000] Size: 512.0KB
LUN4 (DEVCFG) [0x11886000 0x20000] Size: 128.0KB
LUN4 (QUPFW) [0x118a6000 0x10000] Size: 64.0KB
LUN4 (VBMETA_SYSTEM) [0x118b6000 0x10000] Size: 64.0KB
LUN4 (VBMETA_VENDOR) [0x118c6000 0x10000] Size: 64.0KB
LUN4 (VBMETA) [0x118d6000 0x10000] Size: 64.0KB
LUN4 (DTBO) [0x118e6000 0x1800000] Size: 24.0MB
LUN4 (IMAGEFV) [0x130e6000 0x200000] Size: 2.0MB
LUN4 (UEFISECAPP) [0x132e6000 0x200000] Size: 2.0MB
LUN4 (OPPO_SEC) [0x134e6000 0xa00000] Size: 10.0MB
LUN4 (PRELOAD) [0x13ee6000 0x30000000] Size: 768.0MB
LUN4 (CUSTOM) [0x43ee6000 0x10000000] Size: 256.0MB
LUN4 (DEVINFO) [0x53ee6000 0x1000] Size: 4.0KB
LUN4 (DIP) [0x53ee7000 0x100000] Size: 1.0MB
LUN4 (APDP) [0x53fe7000 0x40000] Size: 256.0KB
LUN4 (APDP_FULL) [0x54027000 0x40000] Size: 256.0KB
LUN4 (SPUNVM) [0x54067000 0x800000] Size: 8.0MB
LUN4 (SPLASH) [0x54867000 0x20a4000] Size: 32.640MB
LUN4 (LIMITS) [0x5690b000 0x1000] Size: 4.0KB
LUN4 (TOOLSFV) [0x5690c000 0x100000] Size: 1.0MB
LUN4 (LOGFS) [0x56a0c000 0x800000] Size: 8.0MB
LUN4 (CATELOADER) [0x5720c000 0x200000] Size: 2.0MB
LUN4 (RAWDUMP) [0x5740c000 0x8000000] Size: 128.0MB
LUN4 (LOGDUMP) [0x5f40c000 0x4000000] Size: 64.0MB
LUN4 (STORSEC) [0x6340c000 0x20000] Size: 128.0KB
LUN4 (MULTIIMGOEM) [0x6342c000 0x8000] Size: 32.0KB
LUN4 (MULTIIMGQTI) [0x63434000 0x8000] Size: 32.0KB
LUN4 (UEFIVARSTORE) [0x6343c000 0x80000] Size: 512.0KB
LUN4 (SECDATA) [0x634bc000 0x7000] Size: 28.0KB
LUN4 (CATEFV) [0x634c3000 0x80000] Size: 512.0KB
LUN4 (CATECONTENTFV) [0x63543000 0x100000] Size: 1.0MB
LUN5 (ALIGN_TO_128K_2) [0x6000 0x1a000] Size: 104.0KB
LUN5 (OPPODYCNVBK) [0x20000 0xa00000] Size: 10.0MB
LUN5 (OPPOSTANVBK) [0xa20000 0xa00000] Size: 10.0MB
LUN5 (MODEMST1) [0x1420000 0x200000] Size: 2.0MB
LUN5 (MODEMST2) [0x1620000 0x200000] Size: 2.0MB
LUN5 (OPPORESERVE1) [0x1820000 0x800000] Size: 8.0MB
LUN5 (OPPORESERVE2) [0x2020000 0x8000000] Size: 128.0MB
LUN5 (OPPORESERVE3) [0xa020000 0x4000000] Size: 64.0MB
LUN5 (DRIVER) [0xe020000 0x2000000] Size: 32.0MB
LUN5 (FSG) [0x10020000 0x200000] Size: 2.0MB
LUN5 (FSC) [0x10220000 0x20000] Size: 128.0KB
------------------------------------
Read SYSTEM from LUN0.
------ Android information ------

Detected LINUX(Android) SUPER : 0x0035208000 (9.500GB)
Unable to mount SYSTEM , code : 95
---------------------------------------------

Read USERDATA from LUN0.
Detected USERDATA USERDATA : 0x0295208000 (0.0B)
Unable to mount USERDATA , code : 22
Userdata Superblock contents::
8687E777 00000000 00000000 B1A0040F E80E0000 D84A030F 70AD200E D4895101 †‡çw........± ..è...ØJ..p .Ô‰Q.;
25000000 40DEE677 F024170F 19D1E877 D84A030F B1A0040F 9084040F 58AD200E %...@Şæwğ$...ÑèwØJ..± ...„..X .;
00000000 DB3D9BA2 F024170F 10A25101 00000000 FEFFFFFF 58FF200E 98AF200E ....Û=›¢ğ$...¢Q.....şÿÿÿXÿ ..¯ .;
E80E0000 D84A030F 90AC200E D4895101 25000000 40DEE677 F024170F 19D1E877 è...ØJ...¬ .Ô‰Q.%...@Şæwğ$...Ñèw;
D84A030F 40DEE677 00000000 19D1E877 00000000 0B3D9BA2 F024170F 10A25101 ØJ..@Şæw.....Ñèw.....=›¢ğ$...¢Q.;
00000000 3B3D9BA2 00000000 A8A15101 00000000 00000000 00000000 4462EB77 ....;=›¢....¨¡Q.............Dbëw;
487C3C07 00000000 10AC200E 78B0200E E80E0000 D84A030F 00AD200E D4895101 H| 25000000 40DEE677 F024170F 19D1E877 D84A030F 40DEE677 00000000 19D1E877 %...@Şæwğ$...ÑèwØJ..@Şæw.....Ñèw;
Done.

Z3X EasyJtag Software ver. 3.7.0.20
UFS Socket Info.
Serial: 0123A0FFD277A6BFEE 
Description: EasyJTAG UFS Socket 3 in 1 by MOORC 07.11.20

Identify UFS Chip.
UFS Chip Voltage: Low
VCC: 3232mV
VCCQ2: 1901mV

Chip Info:
Manufacturer: SAMSUNG
ProductName: KM8V8001JM-B813
SerialNumber: 48fad39ce41e
OemID: SAMSUNG_OEM_ID
Firmware Version: 1.9.0.0
UFS Version: 2.1

Maximum Number of LUs: 8
Number of LUs found: 6
LUN 0:
Block size: 0x1000
Size: 0x1D3D800000 / 116,984,000,000B / 116GB
LUN 1 (Boot A):
Block size: 0x1000
Size: 0x800000 / 0,008,000,000B / 8MB
LUN 2 (Boot B):
Block size: 0x1000
Size: 0x800000 / 0,008,000,000B / 8MB
LUN 3:
Block size: 0x1000
Size: 0x8000000 / 0,128,000,000B / 128MB
LUN 4:
Block size: 0x1000
Size: 0x73C00000 / 1,828,000,000B / 1GB
LUN 5:
Block size: 0x1000
Size: 0x10400000 / 0,260,000,000B / 260MB
Number of W-LUs found: 1
W-LUN 0xC4 (REPORT LUNS):
Block size: 0x100
Size: 0x1000000 / 0,016,000,000B / 16MB
Full size: 0x1DCC800000 / 119,200,000,000B / 119GB

Health:
Device life time method A: 0x01 (0%-10% device life time used)
Device life time method B: 0x01 (0%-10% device life time used)
Pre End of Life: 0x01 (Used less then 80% of reserved blocks)

Format OPPO MISC on LUN 0.
Writing Recovery Command to MISC (2)
Done.

OK
Done.
 
Geri
Üst Alt