Reeder P10C Read Firmware

[adnanmirsad56]

Merhaba GSM Turkey Üyeleri bu paylaşacağım konuda Reeder P10C cihazının yazılımı nasıl çekilir onu anlatacağım.

Bu işlemi yapabilmek için elinizde NCK Dongle olması lazım. Bu araç ücretli bir araçtır ve genellikle cep telefonu tamir yapan yerlerde mevcuttur.

NCK Dongle Android MTK Tool'u açın ve Dump Firmware tıklayın. Ardından cihazı kapalı şekilde bağlayın.

Action : Read Firmware.
 Selected 0-By CPU:ELBRUS
 Exe version: NCKDongle AndroidMTK 2.6.3
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM25)
 Boot mode: Preloader
 BBCHIP: 321 0 ca00
 Using Algo 2.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6735
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (116Gb+8192Mb) SAMSUNG 0x513858534142 
 EMMC FW VERSION: 06:00:00:00:00:00:00:00
 EMMC CID: 150100513858534142 : 00000000000000
 EMMC UA SIZE: 0x3a3e00000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3a4a00000      [14.572 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM26)
 Build ID: LRX21M
 Version: 5.0
 Build Date: Mon Apr 25 14:16:50 CST 2016
 Region: TR
 Display ID: P10C
 Model: P10C
 Brand: Reeder
 Device: P10C
 Manufacturer: Reeder
 Mediatek Version Release: GBL7325TR_0302_T5944
 IMEI[1]: xxx
 IMEI[2]: xxx
 Dumping Preloader.
 Partition: proinfo
 Partition: nvram
 Partition: protect1
 Partition: protect2
 Partition: lk
 Partition: para
 Partition: boot
 Partition: recovery
 Partition: logo
 Partition: expdb
 Partition: seccfg
 Partition: oemkeystore
 Partition: secro
 Partition: keystore
 Partition: tee1
 Partition: tee2
 Partition: frp
 Partition: nvdata
 Partition: metadata
 Partition: system
 Partition: cache
 Partition: userdata
 Partition: flashinfo
 Start dumping flash, this can take up to 1 hour.......
 Start processing proinfo
 Reading:  BEGIN: 0x80000          - LEN: 0x300000        
 Start processing nvram
 IMEI[1] from NVRAM: xxx
 IMEI[2] from NVRAM: xxx
 Start processing protect1 ......
 Reading:  BEGIN: 0x880000         - LEN: 0xa00000        
 Start processing protect2 ......
 Reading:  BEGIN: 0x1280000        - LEN: 0xa00000        
 Start processing lk 
 Start processing boot 
 Start processing recovery 
 Start processing logo ......
 Start processing secro  secro.img
 Reading:  BEGIN: 0x5200000        - LEN: 0x600000        
 Start processing trustzone
 Start processing frp ......
 Reading:  BEGIN: 0x6a00000        - LEN: 0x100000        
 Start processing nvdata ......
 Reading:  BEGIN: 0x6b00000        - LEN: 0x2000000       
 Start processing system
 Reading:  BEGIN: 0xb000000        - LEN: 0xa0000000      
 Saved to : C:\Users\Admin\Documents\Android_MTK\firmware_backup\MT6735_EMMC_LRX21M__5_0_P10C_Reeder_2020_01_11_19_44)
 Wait untill phone will start charging.
 [0]All done.[/B]