METECETO78
Yasaklı
- Katılım
- 12 Eki 2018
- Mesajlar
- 127
- Tepkime puanı
- 150
- Puanları
- 43
Çevrimdışı
REPAIR INSTRUCTIONS:
Phone must be powered off!
1. Select correct COM port in 'Port' options.
2. Select connection mode in options ('Flash Mode' or 'TAT Mode') .
3. Check and fill values what you need to repair.
4. Press 'Repair' button.
5. - Flash Mode:
Connect the phone to selected port with UART cable and press 'Power' button shortly,
or just insert cable to phone if you are using auto-ignition cable .
(If you have connection problem, try to push 'Power' button while loader will be sent.)
- TAT Mode:
Connect the phone to selected port with UART cable and press 'Power' button about 3 seconds,
or just insert cable to phone if you are using auto-ignition cable .
Operation: Repair
Selected model: GT-E1050
Selected port: COM3 Z3X BOX Serial Port, 460800
Software version: 34.11
Connect phone and press power button...
cihazı kapalı sekilde (rx-at170) kabloyu bağladığımda normalde devam etmesi gerekiyor ama olmuyor ne yazıkki
Phone must be powered off!
1. Select correct COM port in 'Port' options.
2. Select connection mode in options ('Flash Mode' or 'TAT Mode') .
3. Check and fill values what you need to repair.
4. Press 'Repair' button.
5. - Flash Mode:
Connect the phone to selected port with UART cable and press 'Power' button shortly,
or just insert cable to phone if you are using auto-ignition cable .
(If you have connection problem, try to push 'Power' button while loader will be sent.)
- TAT Mode:
Connect the phone to selected port with UART cable and press 'Power' button about 3 seconds,
or just insert cable to phone if you are using auto-ignition cable .
Operation: Repair
Selected model: GT-E1050
Selected port: COM3 Z3X BOX Serial Port, 460800
Software version: 34.11
Connect phone and press power button...
cihazı kapalı sekilde (rx-at170) kabloyu bağladığımda normalde devam etmesi gerekiyor ama olmuyor ne yazıkki
