- Katılım
- 31 Eki 2018
- Mesajlar
- 2,278
- Tepkime puanı
- 18,992
- Puanları
- 113
Çevrimiçi
Kod:
REPAIR INSTRUCTIONS:
Phone must be powered off!
1. Select correct COM port in 'Port' options.
2. Select connection mode in options ('Flash Mode' or 'TAT Mode') .
3. Check and fill values what you need to repair.
4. Press 'Repair' button.
5. - Flash Mode:
Connect the phone to selected port with UART cable and press 'Power' button shortly,
or just insert cable to phone if you are using auto-ignition cable .
(If you have connection problem, try to push 'Power' button while loader will be sent.)
- TAT Mode:
Connect the phone to selected port with UART cable and press 'Power' button about 3 seconds,
or just insert cable to phone if you are using auto-ignition cable .
Operation: Repair
Selected model: GT-E1190
Selected port: COM72 USB Serial Port, 460800
Software version: 45.0
Connect phone and press power button... Phone detected
Switching phone to TAT mode... OK
Reading phone info... OK
Phone version: E1190BOKG2
CSC version: E1190TMOKG2
IMEI:
Phone SN: R21D653NTK
Reading security... OK
Write security... OK
Rebooting phone... OK
Repair done
Done with Samsung Tool PRO v.45.0 [GT-E1190,Repair]