Çözüldü Samsung Galaxy A50 SM-A505F/FN Ana Konu

Merhaba GSM Turkey Üyeleri bu paylaşacağım konuda Samsung Galaxy A50 SM-A505F U3 cihazına nasıl imei repair işlemi yapılır onu anlatacağım.

Bu işlemi yapabilmek için elinizde Chimera Tool olması lazım. Bu araç ücretli bir araçtır ve genellikle cep telefonu tamir yapan yerlerde mevcuttur.





Kod:
Chimera Mobile Phone Utility version: 22.96.1439 @ 2019-11-15 
Printing phone history

Patch Certificate
15.11.2019
14:37:03

Patch Certificate
11.11.2019
15:42:20

Patch certificate started
Gathering phone info...
Collecting information. Be patient! Do NOT disconnect the phone! 
Model: SM-A505F 
Sales Code: TUR 
Country Code: VIETNAM 
Timezone: Europe/Istanbul 
Android Version: 9 [PPR1.180610.011] [SDK 28] 
Build Date: Wed Oct 30 18:57:45 KST 2019 
PDA Version: A505FDDU3ASK2 [november 2019, rev2] 
Phone Version: A505FXXU3ASK2 [november 2019, rev2] 
CSC Version: A505FOLM3ASK2 [november 2019, rev2] 
Product Code: XXV 
HIDSw Version: A505FDDU3ASK2/A505FOLM3ASK2/A505FXXU3ASK2/A505FDDU3ASK2 
Board Platform: EXYNOS5 
Modem Platform: SHANNON337 
Serial Number: RZ8M91WWBWM 
Imei: xxxxxxxxxxxxxxxxx
Unique Number: CE081938F56E1E21057E 
Connections: AT,MTP 
Battery Status: 4.07V (82%) 
Network Type: GSM 
SIM Status: ABSENT 
Multisim Config: SS 
Knox Version: v30 
Warranty Bit: 1 
Security Patch: 2019-11-01 
Data Encryption State: encrypted 
Preparing...
Checking root access. 
The phone is rooted by: 20.1:MAGISKSU 
Reading data...
The operation is in progress. Be patient! Do NOT disconnect the phone! 
Patching certificate...
Checking root access. 
About 30-90 seconds after the phone starts, the signal strength indicator turns OFF and then turns ON again after a few seconds. 
You can check the status of the imei using: *#0011# 
The patchcert can be removed by repeating the process. 
If a new firmware is used, the patchcert process must be repeated. 
Successfully finished. 
Finished at local time: [11.15.19 17:39:30] 
WorkID: 79485888 [/B]
 
Moderatör tarafında düzenlendi:
Chimera Mobile Phone Utility version: 22.96.1439 @ 2019-11-15
Printing phone history


Patch Certificate
15.11.2019
14:37:03


Patch Certificate
11.11.2019
15:42:20


Patch certificate started
Gathering phone info...
Collecting information. Be patient! Do NOT disconnect the phone!
Model: SM-A505F
Sales Code: TUR
Country Code: VIETNAM
Timezone: Europe/Istanbul
Android Version: 9 [PPR1.180610.011] [SDK 28]
Build Date: Wed Oct 30 18:57:45 KST 2019
PDA Version: A505FDDU3ASK2 [november 2019, rev2]
Phone Version: A505FXXU3ASK2 [november 2019, rev2]
CSC Version: A505FOLM3ASK2 [november 2019, rev2]
Product Code: XXV
HIDSw Version: A505FDDU3ASK2/A505FOLM3ASK2/A505FXXU3ASK2/A505FDDU3ASK2
Board Platform: EXYNOS5
Modem Platform: SHANNON337
Serial Number: RZ8M91WWBWM
Imei: xxxxxxxxxxxxxxxxx
Unique Number: CE081938F56E1E21057E
Connections: AT,MTP
Battery Status: 4.07V (82%)
Network Type: GSM
SIM Status: ABSENT
Multisim Config: SS
Knox Version: v30
Warranty Bit: 1
Security Patch: 2019-11-01
Data Encryption State: encrypted
Preparing...
Checking root access.
The phone is rooted by: 20.1:MAGISKSU
Reading data...
The operation is in progress. Be patient! Do NOT disconnect the phone!
Patching certificate...
Checking root access.
About 30-90 seconds after the phone starts, the signal strength indicator turns OFF and then turns ON again after a few seconds.
You can check the status of the imei using: *#0011#
The patchcert can be removed by repeating the process.
If a new firmware is used, the patchcert process must be repeated.
Successfully finished.
Finished at local time: [11.15.19 17:39:30]
WorkID: 79485888
Emeğine Sağlık Ustam
 
Merhaba GSM Turkey Üyeleri bu paylaşacağım konuda Samsung Galaxy A50 SM-A505F U2 IMEI Repair Firmware dosyasını paylaşacağım.


Bu yazılımı yükleyip ardından root yapın. Combination içinden ENG Modem yükleyin ve IMEI Repair işlemi yapın.
Çözüldü - Samsung Galaxy A50 SM-A505F U2 9.0 IMEI Repair İşlemi
İçinde hat varken kapatıp açınca şebeke gelmiyor
Hattı çıkar telefonu yeniden başlat
Hattı tak şebeke geliyor
REPAIR INSTRUCTIONS:
1. Power on the phone.
2. Enable 'USB debugging' in 'Settings'-'Developer options',
tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Reboot to...' button and select mode to reboot (download or recovery).

Operation: Repair
Selected model: SM-A505F
Software version: 38.2

Waiting ADB device... OK
Reading phone info...
Model: SM-A505F
Android version: 9
PDA version: A505FDDU2ASF2
CSC version: A505FOLE2ASF2
Phone version: A505FXXU2ASE1
Product code: SM-A505FZWCMID
CSC country code: INDONESIA
CSC sales code: XID
Phone SN: R58M46LQHDK
IMEI: xxxxxxxxxxxxxxxxxxx
HW version: MP0.400
RF cal date: 20190424
Chip name: EXYNOS9610
Modem board: SHANNON337
Security patch: 2019-06-01
Boot Warranty bit: 1
SIM State: ABSENT,ABSENT
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching server... OK
Checking server answer... OK
Executing... OK
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Writing security... OK
Rebooting phone... OK
Done with Samsung Tool PRO v.38.2




REPAIR INSTRUCTIONS:
1. Power on the phone.
2. Enable 'USB debugging' in 'Settings'-'Developer options',
tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Reboot to...' button and select mode to reboot (download or recovery).

Operation: Patch Certificate
Selected model: SM-A505F
Software version: 38.2

Waiting ADB device... OK
Reading phone info...
Model: SM-A505F
Android version: 9
PDA version: A505FDDU2ASF2
CSC version: A505FOLE2ASF2
Phone version: A505FXXU2ASE1
Product code: SM-A505FZWCMID
CSC country code: INDONESIA
CSC sales code: XID
Phone SN: R58M46LQHDK
IMEI: xxxxxxxxxxxxxxxxx
HW version: MP0.400
RF cal date: 20190424
Chip name: EXYNOS9610
Modem board: SHANNON337
Security patch: 2019-06-01
Boot Warranty bit: 1
SIM State: ABSENT,ABSENT
Checking Super user right... true
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching server... OK
Checking server answer... OK
Executing... OK
Searching server... OK
Waiting for server answer... OK
Patching... OK
Rebooting phone... OK
Done with Samsung Tool PRO v.38.2

Linki görmek için konuya yorum yapın ve sayfayı yenileyin link gözükecektir.


[Gizli içerik][Gizli içerik]
[Gizli içerik]
saolasın
 
Merhaba GSM Turkey Üyeleri bu paylaşacağım konuda Samsung Galaxy A50 SM-A505F U2 IMEI Repair Firmware dosyasını paylaşacağım.


Bu yazılımı yükleyip ardından root yapın. Combination içinden ENG Modem yükleyin ve IMEI Repair işlemi yapın.
Çözüldü - Samsung Galaxy A50 SM-A505F U2 9.0 IMEI Repair İşlemi
İçinde hat varken kapatıp açınca şebeke gelmiyor
Hattı çıkar telefonu yeniden başlat
Hattı tak şebeke geliyor
REPAIR INSTRUCTIONS:
1. Power on the phone.
2. Enable 'USB debugging' in 'Settings'-'Developer options',
tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Reboot to...' button and select mode to reboot (download or recovery).

Operation: Repair
Selected model: SM-A505F
Software version: 38.2

Waiting ADB device... OK
Reading phone info...
Model: SM-A505F
Android version: 9
PDA version: A505FDDU2ASF2
CSC version: A505FOLE2ASF2
Phone version: A505FXXU2ASE1
Product code: SM-A505FZWCMID
CSC country code: INDONESIA
CSC sales code: XID
Phone SN: R58M46LQHDK
IMEI: xxxxxxxxxxxxxxxxxxx
HW version: MP0.400
RF cal date: 20190424
Chip name: EXYNOS9610
Modem board: SHANNON337
Security patch: 2019-06-01
Boot Warranty bit: 1
SIM State: ABSENT,ABSENT
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching server... OK
Checking server answer... OK
Executing... OK
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Writing security... OK
Rebooting phone... OK
Done with Samsung Tool PRO v.38.2




REPAIR INSTRUCTIONS:
1. Power on the phone.
2. Enable 'USB debugging' in 'Settings'-'Developer options',
tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Reboot to...' button and select mode to reboot (download or recovery).

Operation: Patch Certificate
Selected model: SM-A505F
Software version: 38.2

Waiting ADB device... OK
Reading phone info...
Model: SM-A505F
Android version: 9
PDA version: A505FDDU2ASF2
CSC version: A505FOLE2ASF2
Phone version: A505FXXU2ASE1
Product code: SM-A505FZWCMID
CSC country code: INDONESIA
CSC sales code: XID
Phone SN: R58M46LQHDK
IMEI: xxxxxxxxxxxxxxxxx
HW version: MP0.400
RF cal date: 20190424
Chip name: EXYNOS9610
Modem board: SHANNON337
Security patch: 2019-06-01
Boot Warranty bit: 1
SIM State: ABSENT,ABSENT
Checking Super user right... true
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching server... OK
Checking server answer... OK
Executing... OK
Searching server... OK
Waiting for server answer... OK
Patching... OK
Rebooting phone... OK
Done with Samsung Tool PRO v.38.2

Linki görmek için konuya yorum yapın ve sayfayı yenileyin link gözükecektir.


[Gizli içerik][Gizli içerik]
[Gizli içerik]
teşekkürler
 
Merhaba GSM Turkey Üyeleri bu paylaşacağım konuda Samsung Galaxy A50 SM-A505F U2 IMEI Repair Firmware dosyasını paylaşacağım.


Bu yazılımı yükleyip ardından root yapın. Combination içinden ENG Modem yükleyin ve IMEI Repair işlemi yapın.
Çözüldü - Samsung Galaxy A50 SM-A505F U2 9.0 IMEI Repair İşlemi
İçinde hat varken kapatıp açınca şebeke gelmiyor
Hattı çıkar telefonu yeniden başlat
Hattı tak şebeke geliyor
REPAIR INSTRUCTIONS:
1. Power on the phone.
2. Enable 'USB debugging' in 'Settings'-'Developer options',
tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Reboot to...' button and select mode to reboot (download or recovery).

Operation: Repair
Selected model: SM-A505F
Software version: 38.2

Waiting ADB device... OK
Reading phone info...
Model: SM-A505F
Android version: 9
PDA version: A505FDDU2ASF2
CSC version: A505FOLE2ASF2
Phone version: A505FXXU2ASE1
Product code: SM-A505FZWCMID
CSC country code: INDONESIA
CSC sales code: XID
Phone SN: R58M46LQHDK
IMEI: xxxxxxxxxxxxxxxxxxx
HW version: MP0.400
RF cal date: 20190424
Chip name: EXYNOS9610
Modem board: SHANNON337
Security patch: 2019-06-01
Boot Warranty bit: 1
SIM State: ABSENT,ABSENT
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching server... OK
Checking server answer... OK
Executing... OK
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Writing security... OK
Rebooting phone... OK
Done with Samsung Tool PRO v.38.2




REPAIR INSTRUCTIONS:
1. Power on the phone.
2. Enable 'USB debugging' in 'Settings'-'Developer options',
tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Reboot to...' button and select mode to reboot (download or recovery).

Operation: Patch Certificate
Selected model: SM-A505F
Software version: 38.2

Waiting ADB device... OK
Reading phone info...
Model: SM-A505F
Android version: 9
PDA version: A505FDDU2ASF2
CSC version: A505FOLE2ASF2
Phone version: A505FXXU2ASE1
Product code: SM-A505FZWCMID
CSC country code: INDONESIA
CSC sales code: XID
Phone SN: R58M46LQHDK
IMEI: xxxxxxxxxxxxxxxxx
HW version: MP0.400
RF cal date: 20190424
Chip name: EXYNOS9610
Modem board: SHANNON337
Security patch: 2019-06-01
Boot Warranty bit: 1
SIM State: ABSENT,ABSENT
Checking Super user right... true
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching server... OK
Checking server answer... OK
Executing... OK
Searching server... OK
Waiting for server answer... OK
Patching... OK
Rebooting phone... OK
Done with Samsung Tool PRO v.38.2

Linki görmek için konuya yorum yapın ve sayfayı yenileyin link gözükecektir.


[Gizli içerik][Gizli içerik]
[Gizli içerik]
tşk
tşk
 
iyi günler ustam elimdeki cihaz u2 denediğimde modem hatası alıyorum. ne yapmam gerekir?
 
Merhaba GSM Turkey Üyeleri bu paylaşacağım konuda Samsung Galaxy A50 SM-A505F U2 IMEI Repair Firmware dosyasını paylaşacağım.


Bu yazılımı yükleyip ardından root yapın. Combination içinden ENG Modem yükleyin ve IMEI Repair işlemi yapın.
Çözüldü - Samsung Galaxy A50 SM-A505F U2 9.0 IMEI Repair İşlemi
İçinde hat varken kapatıp açınca şebeke gelmiyor
Hattı çıkar telefonu yeniden başlat
Hattı tak şebeke geliyor
REPAIR INSTRUCTIONS:
1. Power on the phone.
2. Enable 'USB debugging' in 'Settings'-'Developer options',
tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Reboot to...' button and select mode to reboot (download or recovery).

Operation: Repair
Selected model: SM-A505F
Software version: 38.2

Waiting ADB device... OK
Reading phone info...
Model: SM-A505F
Android version: 9
PDA version: A505FDDU2ASF2
CSC version: A505FOLE2ASF2
Phone version: A505FXXU2ASE1
Product code: SM-A505FZWCMID
CSC country code: INDONESIA
CSC sales code: XID
Phone SN: R58M46LQHDK
IMEI: xxxxxxxxxxxxxxxxxxx
HW version: MP0.400
RF cal date: 20190424
Chip name: EXYNOS9610
Modem board: SHANNON337
Security patch: 2019-06-01
Boot Warranty bit: 1
SIM State: ABSENT,ABSENT
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching server... OK
Checking server answer... OK
Executing... OK
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Writing security... OK
Rebooting phone... OK
Done with Samsung Tool PRO v.38.2




REPAIR INSTRUCTIONS:
1. Power on the phone.
2. Enable 'USB debugging' in 'Settings'-'Developer options',
tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Reboot to...' button and select mode to reboot (download or recovery).

Operation: Patch Certificate
Selected model: SM-A505F
Software version: 38.2

Waiting ADB device... OK
Reading phone info...
Model: SM-A505F
Android version: 9
PDA version: A505FDDU2ASF2
CSC version: A505FOLE2ASF2
Phone version: A505FXXU2ASE1
Product code: SM-A505FZWCMID
CSC country code: INDONESIA
CSC sales code: XID
Phone SN: R58M46LQHDK
IMEI: xxxxxxxxxxxxxxxxx
HW version: MP0.400
RF cal date: 20190424
Chip name: EXYNOS9610
Modem board: SHANNON337
Security patch: 2019-06-01
Boot Warranty bit: 1
SIM State: ABSENT,ABSENT
Checking Super user right... true
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching server... OK
Checking server answer... OK
Executing... OK
Searching server... OK
Waiting for server answer... OK
Patching... OK
Rebooting phone... OK
Done with Samsung Tool PRO v.38.2

Linki görmek için konuya yorum yapın ve sayfayı yenileyin link gözükecektir.


[Gizli içerik][Gizli içerik]
[Gizli içerik]
tesekkurler
 
Geri
Üst Alt