Samsung Galaxy J3 Pro SM-J330G 9.0 U3 IMEI Repair

taboglu53

taboglu53

VIP Üye
Katılım
18 Ağu 2018
Mesajlar
352
Tepkime puanı
202
Puanları
43
Çevrimdışı
s.a ustalarım samsung j330g 9.0 u3 repair de chimera modem destekliyor mu ?
 
20200725_185735[1].jpg
ustam z3x de denedim modem düşür hatası verdi chimera da repair yaparda sonradan modem hata
sı alır mıyım ondan emin olmak istiyorum chimera güncellemesine takılmak istemiyorum
 
Modem hatası alıyorum.

20200725_191953[1].jpg
 
Moderatör tarafında düzenlendi:
CHİMERA TOOL ile bu logda olan yazılım ile yapıla biliyor
Collecting information. Be patient! Do NOT disconnect the phone!
Model: SM-J330G
Sales Code: XME
Country Code: MALAYSIA
Timezone: Europe/Istanbul
Android Version: 7.0 [NRD90M] [SDK 24]
Build Date: Thu Apr 5 12:51:02 KST 2018
PDA Version: J330GDXU3ARD1 [april 2018, rev1]
Phone Version: J330GDXU3ARD1 [april 2018, rev1]
CSC Version: J330GOLB3ARD1 [april 2018, rev1]
Board Platform: EXYNOS5
Modem Platform: SHANNON305
Serial Number: XXXXXXXXXX
Imei: XXXXXXXXXXXXXXX
Imei2: XXXXXXXXXXXXXXX
Battery Status: 3.84V (52%)
Network Type: GSM
SIM Status: ABSENT,READY
Multisim Config: DSDS
Knox Version: v30
Warranty Bit: 1
Security Patch: 2018-04-01
Em Did: 0617AF057B24
Preparing...
Checking root access.
The phone is rooted by: 3.19:EFTSU
An old patchcert detected on the phone.
Suggestion: Install a new firmware then re-run the pathcert process.
Reading data...
The operation is in progress. Be patient! Do NOT disconnect the phone!
Waiting for ADB connection. Be patient! Do NOT disconnect the phone!
Patching certificate...
Checking root access.
About 30-180 seconds after the phone starts, the signal strength indicator turns OFF and then turns ON again after a few seconds.
You can check the status of the imei using: *#0011#
The patchcert can be removed by repeating the process.
After installing new firmware, the patchcert process must be repeated.
Successfully finished.
Finished at local time: [06.01.21 15:33:18]
WorkID: 136433325
 
Nuri92' Alıntı:
CHİMERA TOOL ile bu logda olan yazılım ile yapıla biliyor
Collecting information. Be patient! Do NOT disconnect the phone!
Model: SM-J330G
Sales Code: XME
Country Code: MALAYSIA
Timezone: Europe/Istanbul
Android Version: 7.0 [NRD90M] [SDK 24]
Build Date: Thu Apr 5 12:51:02 KST 2018
PDA Version: J330GDXU3ARD1 [april 2018, rev1]
Phone Version: J330GDXU3ARD1 [april 2018, rev1]
CSC Version: J330GOLB3ARD1 [april 2018, rev1]
Board Platform: EXYNOS5
Modem Platform: SHANNON305
Serial Number: XXXXXXXXXX
Imei: XXXXXXXXXXXXXXX
Imei2: XXXXXXXXXXXXXXX
Battery Status: 3.84V (52%)
Network Type: GSM
SIM Status: ABSENT,READY
Multisim Config: DSDS
Knox Version: v30
Warranty Bit: 1
Security Patch: 2018-04-01
Em Did: 0617AF057B24
Preparing...
Checking root access.
The phone is rooted by: 3.19:EFTSU
An old patchcert detected on the phone.
Suggestion: Install a new firmware then re-run the pathcert process.
Reading data...
The operation is in progress. Be patient! Do NOT disconnect the phone!
Waiting for ADB connection. Be patient! Do NOT disconnect the phone!
Patching certificate...
Checking root access.
About 30-180 seconds after the phone starts, the signal strength indicator turns OFF and then turns ON again after a few seconds.
You can check the status of the imei using: *#0011#
The patchcert can be removed by repeating the process.
After installing new firmware, the patchcert process must be repeated.
Successfully finished.
Finished at local time: [06.01.21 15:33:18]
WorkID: 136433325
Genişletmek için tıkla ...


root dosyası var mı ustam eline?
 
Cevap yazmak için giriş yap yada kayıt ol.
Geri
Üst Alt