- Katılım
- 21 Haz 2018
- Mesajlar
- 11,504
- Tepkime puanı
- 28,111
- Puanları
- 113
Çevrimdışı
Merhaba Arkadaşlar
Bu konumuzda sizlere j7 pro u4 9.0 repair başarı raporu paylaşacağım
Root yapmak için BURADAKİ konumuzdan faydalanabilirsiniz.
Repair i z3x ten yaptım. Patch de Z3x den yapmıştım şebeke vermediği için Chimera ile yeniden patch yapınca şebeke verdi.
Bu konumuzda sizlere j7 pro u4 9.0 repair başarı raporu paylaşacağım
Root yapmak için BURADAKİ konumuzdan faydalanabilirsiniz.
Repair i z3x ten yaptım. Patch de Z3x den yapmıştım şebeke vermediği için Chimera ile yeniden patch yapınca şebeke verdi.
REPAIR INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Fill values what you need to repair.
6. Press 'Repair' button.
7. Press 'Patch Certificate' if you have network problem after repairing.
Operation: Repair
Selected model: SM-J730F
Software version: 37.0
Waiting ADB device... OK
Reading phone info...
Model: SM-J730F
Android version: 9
PDA version: J730FXWU4CSF5
CSC version: J730FOJV4CSEI
Phone version: J730FXXU4BSD5
Product code: SM-J730FZDGEGY
CSC country code: Egypt
CSC sales code: EGY
Phone SN: R28K13Bxxxxxx
IMEI: xxxxxxxxxxxxxx
HW version: MP 0.400
RF cal date: 20180123
Chip name: EXYNOS7870
Modem board: SHANNON315
Security patch: 2019-05-01
Boot Warranty bit: 1
SIM State: LOADED,ABSENT
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching server... OK
Checking server answer... OK
Executing... OK
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Writing security... OK
Rebooting phone... OK
Done with Samsung Tool PRO v.37.0
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Fill values what you need to repair.
6. Press 'Repair' button.
7. Press 'Patch Certificate' if you have network problem after repairing.
Operation: Repair
Selected model: SM-J730F
Software version: 37.0
Waiting ADB device... OK
Reading phone info...
Model: SM-J730F
Android version: 9
PDA version: J730FXWU4CSF5
CSC version: J730FOJV4CSEI
Phone version: J730FXXU4BSD5
Product code: SM-J730FZDGEGY
CSC country code: Egypt
CSC sales code: EGY
Phone SN: R28K13Bxxxxxx
IMEI: xxxxxxxxxxxxxx
HW version: MP 0.400
RF cal date: 20180123
Chip name: EXYNOS7870
Modem board: SHANNON315
Security patch: 2019-05-01
Boot Warranty bit: 1
SIM State: LOADED,ABSENT
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching server... OK
Checking server answer... OK
Executing... OK
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Writing security... OK
Rebooting phone... OK
Done with Samsung Tool PRO v.37.0
Chimera Mobile Phone Utility version: 22.44.1155 @ 2019-09-23
Printing phone history
Knoxguard Unlock
23.09.2019
15:42:03
Patch certificate started
Gathering phone info...
Collecting information. Be patient! Do NOT disconnect the phone!
Model: SM-J730F
Sales Code: EGY
Country Code: Egypt
Timezone: Europe/Istanbul
Android Version: 9 [PPR1.180610.011] [SDK 28]
Build Date: Wed Jun 12 14:56:34 KST 2019
PDA Version: J730FXWU4CSF5 [june 2019, rev5]
Phone Version: J730FXXU4BSD5 [april 2019, rev5]
CSC Version: J730FOJV4CSEI [may 2019, revI]
Product Code: EGY
HIDSw Version: J730FXWU4CSF5/J730FOJV4CSEI/J730FXXU4BSD5/J730FXWU4CSF5
Board Platform: EXYNOS5
Modem Platform: SHANNON315
Serial Number: R28K13Bxxxxxxx
Imei: xxxxxxxxxxxxxxxx
Unique Number: CBJ007845ECDCC4
Connections: AT,MTP
Battery Status: 4.18V (100%)
Network Type: GSM
SIM Status: LOADED,UNKNOWN
Multisim Config: DSDS
Knox Version: v30
Warranty Bit: 0
Security Patch: 2019-05-01
Data Encryption State: unencrypted
Preparing...
Checking current patchcert.
Restarting phone.
Waiting for ADB connection. Be patient! Do NOT disconnect the phone!
Previous patchcert successfully removed.
Checking modem.
Checking root.
The phone is rooted by: 18.1:MAGISKSU (topjohnwu)
Checking boot image. Be patient! Do NOT disconnect the phone!
The knox is still valid. Because of the boot patch the warranty will void.
Writing boot image.
Restarting phone.
Waiting for ADB connection. Be patient! Do NOT disconnect the phone!
Reading data...
Checking modem version.
Restarting phone.
Waiting for ADB connection. Be patient! Do NOT disconnect the phone!
Reading data. Be patient! Do NOT disconnect the phone!
Patching certificate...
The operation is in progress. Be patient! Do NOT disconnect the phone!
After the phone starts, it switches to flying mode and then returns to normal mode after 20-70 seconds.
You can check the status of the imei using: *#0011#
The patchcert can be removed by repeating the process.
If a new firmware is used, the patchcert process must be repeated.
Succeeded.
Successfully finished.
Finished at local time: [09.23.19 19:11:50]
WorkID: 74009293
Printing phone history
Knoxguard Unlock
23.09.2019
15:42:03
Patch certificate started
Gathering phone info...
Collecting information. Be patient! Do NOT disconnect the phone!
Model: SM-J730F
Sales Code: EGY
Country Code: Egypt
Timezone: Europe/Istanbul
Android Version: 9 [PPR1.180610.011] [SDK 28]
Build Date: Wed Jun 12 14:56:34 KST 2019
PDA Version: J730FXWU4CSF5 [june 2019, rev5]
Phone Version: J730FXXU4BSD5 [april 2019, rev5]
CSC Version: J730FOJV4CSEI [may 2019, revI]
Product Code: EGY
HIDSw Version: J730FXWU4CSF5/J730FOJV4CSEI/J730FXXU4BSD5/J730FXWU4CSF5
Board Platform: EXYNOS5
Modem Platform: SHANNON315
Serial Number: R28K13Bxxxxxxx
Imei: xxxxxxxxxxxxxxxx
Unique Number: CBJ007845ECDCC4
Connections: AT,MTP
Battery Status: 4.18V (100%)
Network Type: GSM
SIM Status: LOADED,UNKNOWN
Multisim Config: DSDS
Knox Version: v30
Warranty Bit: 0
Security Patch: 2019-05-01
Data Encryption State: unencrypted
Preparing...
Checking current patchcert.
Restarting phone.
Waiting for ADB connection. Be patient! Do NOT disconnect the phone!
Previous patchcert successfully removed.
Checking modem.
Checking root.
The phone is rooted by: 18.1:MAGISKSU (topjohnwu)
Checking boot image. Be patient! Do NOT disconnect the phone!
The knox is still valid. Because of the boot patch the warranty will void.
Writing boot image.
Restarting phone.
Waiting for ADB connection. Be patient! Do NOT disconnect the phone!
Reading data...
Checking modem version.
Restarting phone.
Waiting for ADB connection. Be patient! Do NOT disconnect the phone!
Reading data. Be patient! Do NOT disconnect the phone!
Patching certificate...
The operation is in progress. Be patient! Do NOT disconnect the phone!
After the phone starts, it switches to flying mode and then returns to normal mode after 20-70 seconds.
You can check the status of the imei using: *#0011#
The patchcert can be removed by repeating the process.
If a new firmware is used, the patchcert process must be repeated.
Succeeded.
Successfully finished.
Finished at local time: [09.23.19 19:11:50]
WorkID: 74009293
