Çevrimdışı
Merhaba Gsmturkey Üyeleri
Bugün Sizlere Samsung Galaxy S5 Neo İmei Repair İşlemini Anlatacağım
Elinizde Z3x Box Olması Gerekir Ücretli Bir Araçtır
Bugün Sizlere Samsung Galaxy S5 Neo İmei Repair İşlemini Anlatacağım
Elinizde Z3x Box Olması Gerekir Ücretli Bir Araçtır
REPAIR INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Fill values what you need to repair.
6. Press 'Repair' button.
7. Press 'Patch Certificate' if you have network problem after repairing.
7. Press 'Reset EFS' if you need to reset it.
Be carefully, do not perform this without necessity. Backup will be created automatically.
Operation: Repair
Selected model: SM-G903F
Software version: 43.8
Waiting ADB device... OK
Reading phone info...
Model: SM-G903F
Android version: 6.0.1
PDA version: G903FXXU2BRH2
CSC version: G903FDAX2BRH2
Phone version: G903FXXU2BRH2
Product code: SM2G903FZKATRG
CSC country code: AUSTRIA
CSC sales code: TRG
Phone SN: RF8GB31JQKD
IMEI: XXXXXXXXXXXXXX
HW version: MP 0.500
RF cal date: 20151128
Chip name: EXYNOS7580
Modem board: SHANNON310
Security patch: 2018-04-01
Boot Warranty bit: 1
SIM State: ABSENT
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Repairing... OK
Writing NV data... OK
Rebooting phone... OK
Repair done
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Fill values what you need to repair.
6. Press 'Repair' button.
7. Press 'Patch Certificate' if you have network problem after repairing.
7. Press 'Reset EFS' if you need to reset it.
Be carefully, do not perform this without necessity. Backup will be created automatically.
Operation: Repair
Selected model: SM-G903F
Software version: 43.8
Waiting ADB device... OK
Reading phone info...
Model: SM-G903F
Android version: 6.0.1
PDA version: G903FXXU2BRH2
CSC version: G903FDAX2BRH2
Phone version: G903FXXU2BRH2
Product code: SM2G903FZKATRG
CSC country code: AUSTRIA
CSC sales code: TRG
Phone SN: RF8GB31JQKD
IMEI: XXXXXXXXXXXXXX
HW version: MP 0.500
RF cal date: 20151128
Chip name: EXYNOS7580
Modem board: SHANNON310
Security patch: 2018-04-01
Boot Warranty bit: 1
SIM State: ABSENT
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Repairing... OK
Writing NV data... OK
Rebooting phone... OK
Repair done
EPAIR INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Fill values what you need to repair.
6. Press 'Repair' button.
7. Press 'Patch Certificate' if you have network problem after repairing.
7. Press 'Reset EFS' if you need to reset it.
Be carefully, do not perform this without necessity. Backup will be created automatically.
Operation: Patch Certificate
Selected model: SM-G903F
Software version: 43.8
Waiting ADB device... OK
Reading phone info...
Model: SM-G903F
Android version: 6.0.1
PDA version: G903FXXU2BRH2
CSC version: G903FDAX2BRH2
Phone version: G903FXXU2BRH2
Product code: SM2G903FZKATRG
CSC country code: AUSTRIA
CSC sales code: TRG
Phone SN: RF8GB31JQKD
IMEI: XXXXXXXXXXXXXXXX
HW version: MP 0.500
RF cal date: 20151128
Chip name: EXYNOS7580
Modem board: SHANNON310
Security patch: 2018-04-01
Boot Warranty bit: 1
SIM State: ABSENT
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Reading data... OK
Detecting MODEM... OK
Reading MODEM... OK
Calculating... OK
Initialization data... OK
Writing zTool... OK
Initialization zTool... OK
Rebooting phone... OK
Patching CERT check... done
Done with Samsung Tool PRO v.43.8
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Fill values what you need to repair.
6. Press 'Repair' button.
7. Press 'Patch Certificate' if you have network problem after repairing.
7. Press 'Reset EFS' if you need to reset it.
Be carefully, do not perform this without necessity. Backup will be created automatically.
Operation: Patch Certificate
Selected model: SM-G903F
Software version: 43.8
Waiting ADB device... OK
Reading phone info...
Model: SM-G903F
Android version: 6.0.1
PDA version: G903FXXU2BRH2
CSC version: G903FDAX2BRH2
Phone version: G903FXXU2BRH2
Product code: SM2G903FZKATRG
CSC country code: AUSTRIA
CSC sales code: TRG
Phone SN: RF8GB31JQKD
IMEI: XXXXXXXXXXXXXXXX
HW version: MP 0.500
RF cal date: 20151128
Chip name: EXYNOS7580
Modem board: SHANNON310
Security patch: 2018-04-01
Boot Warranty bit: 1
SIM State: ABSENT
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Reading data... OK
Detecting MODEM... OK
Reading MODEM... OK
Calculating... OK
Initialization data... OK
Writing zTool... OK
Initialization zTool... OK
Rebooting phone... OK
Patching CERT check... done
Done with Samsung Tool PRO v.43.8