Çözüldü Samsung Galaxy S6 SM-G920F U5 35000006 Fix

[silivriserdar]

Merhaba GSM Turkey Üyeleri bu paylaşacağım konuda Samsung Galaxy S6 SM-G920F cihazında oluşan 3500000 sorunu nasıl çözülür onu anlatacağım. Cihazı EFTSU ile root yapalım. Ardından Octoplus Box Samsung Tool ile IMEI repair ve Patch Certificate İşlemi yapalım. En son Z3X Box Samsung Tool ile SIM unlock yapalım.

Konuya başarı raporlarını ekliyorum.

Lütfen konu altına yorum yaparken Teşekkürler, Elinize sağlık, süper, sağol, helal olsun gibi kelimeler yazıp konuları kirletmeyelim. Herkes aradığını bu mesajlar yüzünden bulamıyor. Altta beğen butonuna basmanız yeterlidir. Konu ile ilgili sorununuzu veya çözümünüz varsa yorum yapın. Konu ile alakasız cevaplar silinecektir. ​

​

-----------------------------------------------------------------------------------
Work ID: 0000000001B4F169
Platform: Samsung Android
Selected port: COM12
Selected model: SM-G920F
Operation: Repair IMEI A
Please, press "OK" button on the phone to allow USB debugging.
Please, press "OK" button on the phone to allow USB debugging.
Detected phone model: SM-G920F
Firmware compiled date: Mon Dec 4 13:32:37 KST 2017
PDA version: G920FXXU5EQL4
CSC version: G920FSFR5EQI1
SW version: G920FXXU5EQHC
Build number: UNKNOWN
Phone SN: RF8G800D5GJ
Android version: 7.0 (NRD90M)
Sales code: SFR
Country: France
HW platform: exynos5
HW Chip: exynos7420
HW Modem: SHANNON333
Security patch level: 2017-12-01
Warranty Void: 1
SIM 1 status: not ready
Codename: zerofltexx
Checking Root:
Phone is Rooted.
Reading security backup, please wait...
Backup saved as C:\Program Files (x86)\Octoplus\Octoplus_Samsung
\BACKUP\Security-SM-G920F-RF8G800D5GJ-22-10-2021_22-15-
06-.asec file
Initializing exploit...OK
Executing exploit...OK
Exploit has been executed successfully 
New IMEI: 
Writing new phone IMEI...
Please make "Repair Network" operation after reboot!
IMEI successfully repaired.
Performed by 3.0.6.1 Software version.
-----------------------------------------------------------------------------------
Work ID: 0000000001B4F271
Platform: Samsung Android
Selected port: COM12
Selected model: SM-G920F
Operation: Repair Network
Detected phone model: SM-G920F
Firmware compiled date: Mon Dec 4 13:32:37 KST 2017
PDA version: G920FXXU5EQL4
CSC version: G920FSFR5EQI1
SW version: G920FXXU5EQHC
Build number: UNKNOWN
Phone SN: RF8G800D5GJ
Android version: 7.0 (NRD90M)
Sales code: SFR
Country: France
HW platform: exynos5
HW Chip: exynos7420
HW Modem: SHANNON333
Security patch level: 2017-12-01
Warranty Void: 1
SIM 1 status: absent
Codename: zerofltexx
Checking Root:
Phone is Rooted.
Initializing exploit...
Executing exploit...
Repairing network...
Network is successfully repaired.
Performed by 3.0.6.1 Software version.


UNLOCK INSTRUCTIONS:
New Securiry Type:
Phone must be rooted!
If the software can't root the phone automatically, 
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock' button and select 'New Unlock' for direct unlock.
6. Press 'Read codes' button and select 'Read codes New' to read security codes.

Old Securiry Type:
1. Power on the phone.
2. Connect the phone to PC with USB cable.
3. Check Samsung modem in device manager, install drivers if needed.
4. Press 'Unlock' button and select 'Unlock' for direct unlock.
5. Press 'Read codes' button and select 'Read codes' to read security codes.

To read security codes via diagnostic port:
1. Power on the phone.
2. Type *#0808# and select 'DM+MODEM+ADB'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Press 'Read Codes DIAG' button to read security codes.

To read security codes using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read Codes via server' button, select 'Read codes ...' algo,
write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)

To reset Google account activation or Samsung reactivation lock:
1. Power on the phone in download mode (turn off phone, press vol.down + home + power).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Press 'Reset FRP/React/EE' to deactivate Google/Samsung/EE account activation lock.
4. After phone reboot, go to settings and perform factory reset.

To reset Google account activation lock with UART cable:
1. Phone must be powered off
2. Connect the phone to UART cable.
3. Select correct COM port in port settings.
4. Press 'Reset FRP UFS' and follow the instructions in program. 

Operation: Unlock
Selected model: SM-G920F
Selected port: COM4 Bluetooth bağlantısı üzerinden Standart Seri
Software version: 43.16

Waiting ADB device... OK
Reading phone info...
Model: SM-G920F
Android version: 7.0
PDA version: G920FXXU5EQL4
CSC version: G920FSFR5EQI1
Phone version: G920FXXU5EQHC
Product code: SM-G920FZKAXEF
CSC country code: France
CSC sales code: SFR
Phone SN: RF8G800D5GJ
IMEI: 
HW version: MP 0.800
RF cal date: 20150406
Chip name: EXYNOS7420
Modem board: SHANNON333
Security patch: 2017-12-01
Boot Warranty bit: 1
SIM State: NOT_READY
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Initialization zTool... OK
Running zTool, please wait... OK
HWID: 48 D0 B4 F5 16 04 00 00 00 00 00 00 00 00 00 00
Calculating... OK
Unlocking... OK
Writing NV data... OK
Rebooting phone... OK
Unlock done
Done with Samsung Tool PRO v.43.16