ustam aşagıdaki yöntem nasıl? repair olur mu?
Step1: Download the latest version of TWRP for vince and rename the downloaded file to recovery.img
Step2: Download the latest version of adb platform tools and extract it somewhere and open the extracted folder and copy/cut recovery.img and paste it into this folder
Step3: Enable USB Debugging Mode
Step4: Hold Down shift key on your computer keyboard and in some empty place of the adb platform tools folder make a right click with your mouse or touchpad and select "Open Command Line Window Here" or "Open PowerShel Window Here"
Step5: put your phone in fastboot mode such as Step3 in Section1 and after conneting it to your PC/Laptop type the following commands
- cmd
- fastboot devices
- fastboot flash recovery recovery.img
- fastboot reboot recovery.img
Copy the Code
- Install Magisk
Step1: Download the latest version of Magisk
Step2: Put it in to your SD Card or Phone Memory(you can Mount it using TWRP advance Option)
Step3: Install it as shown below
- Find modemst1 and modemst2 and fgs memory blocks
Step1: Connect your phone to PC/Laptop and if you Closed the PowerSehll/CMD window then Do the Step3 of Section2 agian
Step2: type the following command just for Redmi 5 Plus MEG7
- adb shell "ls -lap /dev/block/platform/soc/7824900.sdhci/by-name"
Copy the Code
- backup those files
Step1: type the following commands just for Redmi 5 Plus MEG7
- adb shell "su -c 'dd if=/dev/block/mmcblk0p13 of=/sdcard/modemst1'"
- adb shell "su -c 'dd if=/dev/block/mmcblk0p14 of=/sdcard/modemst2'"
- adb shell "su -c 'dd if=/dev/block/mmcblk0p16 of=/sdcard/fsg'"
Copy the Code
- deplete the memory regen of those files
Step1: type the following commands just for Redmi 5 Plus MEG7
- adb shell "su -c 'dd if=/dev/zero of=/dev/block/mmcblk0p13'"
- adb shell "su -c 'dd if=/dev/zero of=/dev/block/mmcblk0p14'"
- adb shell "su -c 'dd if=/dev/zero of=/dev/block/mmcblk0p16'"
Copy the Code
- restart your phone
Step1: type the following command
- adb reboot
Copy the Code
- Run Diag Mod
Step1: Restart your phone and wait until Android loads itself (also open the phone lock and login to your mi account if needed)
Step2: Install MagiskManager
Step3: Connect your phone to PC/Laptop and if you Closed the PowerSehll/CMD window then Do the Step3 of Section2 agian
Step4: type the following command
- cmd
- adb shell "su -c 'setprop sys.usb.config diag,adb'"
Copy the Code
- use QPST Configuration Make an backup of your phone configuration
Step1: Download and Install QPST Flash Tools
Step2: Download and Install QUD
Step3: Run QPST Configuration
Step4: Use backup Tab to Make a backup from existing configuration
- change the xqcn backup file
Step1: Download and Install a Good XML editor or Atom or Notepad++ (you can even use a hex editor but it's an XML file so because i don't like to overkill the problem i am using atom editor)
Step2: Download and Run IMEI Converter
Step3: Look for the following case insensitive regx into your backed up configuration
- 08 .A .. .. .. .. .. .. ..
Copy the Code
Step4: Change That to Converted IMEI of your Choise
- restore the change file
Step1: Use Restore Tab to Restore manipulated configuration
- restart again
Step1: type the following command
- cmd
- adb reboot
Copy the Code