Çözüldü Xiaomi Redmi Note 10S Kalıcı IMEI Repair (CM2)

[odunbey]

S/N: 4B1E57BB v0154
Infinity [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.38d1

Firmware files: C:\1\
Backup files: C:\InfinityBox\CM2MT2\backup\
Backup files: 0 dirs: 0
Build device list...
Init environment...
Load IDBase v124493 Ok

Check for updates...
Installed v2.38 Latest v2.39 Required card v0154
Infinity Chinese Miracle-2 #CM2MT2 v2.39 - MT6789 [Helio G99] and more

Required firmware v0154

Wrong Username or Password - set it at [Settings] to get server access


Operation: Repair Security [ v2.38d1 ]
Platform: MTK SmartPhone - MT65/67/68/81/83/87 | Helio G/P/X
Mode: META
Wait...
1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device [Vol+ | Vol-]
Waiting for device connection...

PTFN: MediaTek USB Port (COM5)
MODE: BOOTROM; PORT: 5
Waiting BOOT ack...
BROM: Skip ACK verify
BROM: Init BROM
BROM: Init passed
CHIP: MT6785 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0813
CODE: Krug
TYPE: MODERN [RAPHAEL]
MEID: AE26C181037AEE128B6906F8C9F95F15
BROM: Sec Level: 0x000000E7 Mode: SBC+SLA+SDA+EXT
BROM: BROM|BL : 0x05|0xFE [BOOTROM]
BROM: SOCID: E16137C1C98D9DDD25CD9205E2016B9C3B81B54C9F03F5FCFE7EECB7C1D3A833
BROM: SLA: Local Auth
BROM: SLA: Starting Auth
BROM: FF : Look for EMI
BROM: FF : EMI found
BROM: SLA: Auth Passed
BROM: SEC: 0x000000E0
BROM: Configuring target for META
BROM: META configured
Waiting for boot logo...
INIT: META confirmed
Boot done (0)

AP_CHIP: MT6785
AP_SWTM: Tue Mar 29 10 26 03 CST 2022
AP_DSPP: global
AP_SWVR: alps-mp-r0.mp1.tc8sp3-mt6785-V1.10_lcsh.xm.r0mp1.k69v1.64_P60
Switch protocol...
MD_CHIP: MT6785
MD_SWTM: 2000.00.00
MD_DSPV: 1.0
MD_DSPP: MOLY.LR13.R1.MP.V89.5.P64
MD_SWVR: LCSH_XM_R0MP1_MT6785_SP_HW
MD_HWVR: Unknown

IMEI[1]: 860511059172804
IMEI[2]: 860511059172812


IMEI[2]: 866855052467883
Item: update Ok
Done: 00:04:31
Reconnect Power/Cable now

Make right mouse click to see commands

Operation: Memory Tool Init [ v2.38d1 ]
Platform: MTK SmartPhone - MT65/67/68/81/83/87 | Helio G/P/X
Wait...
1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device [Vol+ | Vol-]
Waiting for device connection...

PTFN: MediaTek USB Port (COM5)
MODE: BOOTROM; PORT: 5
Waiting BOOT ack...
BROM: Skip ACK verify
BROM: Init BROM
BROM: Init passed
CHIP: MT6785 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0813
CODE: Krug
TYPE: MODERN [RAPHAEL]
MEID: AE26C181037AEE128B6906F8C9F95F15
BROM: Sec Level: 0x000000E7 Mode: SBC+SLA+SDA+EXT
BROM: BROM|BL : 0x05|0xFE [BOOTROM]
BROM: SOCID: E16137C1C98D9DDD25CD9205E2016B9C3B81B54C9F03F5FCFE7EECB7C1D3A833
BROM: SLA: Local Auth
BROM: SLA: Starting Auth
BROM: SLA: Auth Passed
BROM: SEC: 0x000000E0
AGENT: 0_base: BASE_v2112 | Manual: Off
[0656ff20] C:\InfinityBox\CM2MT2\boot\0_base\BASE_v2112\MTK_AllInOne_DA.bin
Looking for suitable BootChain in DA...
Found MT6785
AGENT: MTK_DOWNLOAD_AGENT
BROM: Sending 1st DA...
BROM: DA sent
BROM: Transfer control to DA...
DA: AGENT started
DA: SYNC
DA: MODE: BROM
DA: EXT_RAM NOT initialized

UFS:
CID: AD014839485131354146414D42444152
Ven: 0x01AD | H9HQ15AFAMBDAR | A043
EMI: FireFly preloader_k85v1_64.bin with 5 memory type(s) supported
EMI: Init EMI from INTERNAL DB
EMI: EXT_RAM CFG Passed

DA: BOOT to 2nd DA...
DA: 2ND stage confirmed
DA: SYNC with DA passed
DA: Receiving HW info

SRAM 0x00080000 [ 512,00 KB ]
DRAM 0x200000000 [ 8,00 GB ]

UFS:
CID: AD014839485131354146414D42444152
Ven: 0x01AD
VID: H9HQ15AFAMBDAR
IFW: A043
LU0: 0x00400000 [ 4,00 MB ]
LU1: 0x00400000 [ 4,00 MB ]
LU2: 0x1DCB000000 [ 119,17 GB ]
FSN: 210691CBAB80
REG: 0x101010000

CHIP: MT6785 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0813
CODE: Krug
TYPE: MODERN [RAPHAEL]
RNID: 6CB005A4FDE73D5F50BA85F214D416EF
MEID: AE26C181037AEE128B6906F8C9F95F15

DA: USB: HIGH-SPEED
Boot done [1]

Reading...
Ok
Verify device config...
Ok
Loaders Ok

Reading...
MemTool storage: C:\InfinityBox\CM2MT2\phdata\
Ready
MemoryTool Operation: Read Memory
Wait...
Read partitions [2]
[0] Read partition: NVDATA
Saved: C:\InfinityBox\CM2MT2\phdata\MT6785__AE26C181037AEE128B6906F8C9F95F15\NVDATA.bin
[1] Read partition: NVRAM
Saved: C:\InfinityBox\CM2MT2\phdata\MT6785__AE26C181037AEE128B6906F8C9F95F15\NVRAM.bin
Operation finished

MemoryTool Operation: Erase Memory
Wait...
WARNING!
Write or Erase operation(s) may brick device!
Make sure you select correct partitions and data!
Continue?
Yes
Erase selected partitions [2]
[0] Erase partition: NVDATA
Erase partition Ok
[1] Erase partition: NVRAM
Erase partition Ok
Operation finished

MemoryTool Operation: Erase Memory
Wait...
WARNING!
Write or Erase operation(s) may brick device!
Make sure you select correct partitions and data!
Continue?
Yes
Erase selected partitions [2]
[0] Erase partition: NVDATA
Erase partition Ok
[1] Erase partition: NVRAM
Erase partition Ok
Operation finished

MemoryTool Operation: Erase Memory
Wait...
WARNING!
Write or Erase operation(s) may brick device!
Make sure you select correct partitions and data!
Continue?
Yes
Erase selected partitions [2]
[0] Erase partition: NVDATA
Erase partition Ok
[1] Erase partition: NVRAM
Erase partition Ok
Operation finished
Close MemoryTool session
Done: 00:05:30
Reconnect Power/Cable now


Operation: Repair Security [ v2.38d1 ]
Platform: MTK SmartPhone - MT65/67/68/81/83/87 | Helio G/P/X
Mode: META
Wait...
1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device [Vol+ | Vol-]
Waiting for device connection...

PTFN: MediaTek USB Port (COM5)
MODE: BOOTROM; PORT: 5
Waiting BOOT ack...
BROM: Skip ACK verify
BROM: Init BROM
BROM: Init passed
CHIP: MT6785 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0813
CODE: Krug
TYPE: MODERN [RAPHAEL]
MEID: AE26C181037AEE128B6906F8C9F95F15
BROM: Sec Level: 0x000000E7 Mode: SBC+SLA+SDA+EXT
BROM: BROM|BL : 0x05|0xFE [BOOTROM]
BROM: SOCID: E16137C1C98D9DDD25CD9205E2016B9C3B81B54C9F03F5FCFE7EECB7C1D3A833
BROM: SLA: Local Auth
BROM: SLA: Starting Auth
BROM: SLA: Auth Passed
BROM: SEC: 0x000000E0
BROM: Configuring target for META
BROM: META configured
Waiting for boot logo...
INIT: META confirmed
Boot done (1)

AP_CHIP: MT6785
AP_SWTM: Tue Mar 29 10 26 03 CST 2022
AP_DSPP: global
AP_SWVR: alps-mp-r0.mp1.tc8sp3-mt6785-V1.10_lcsh.xm.r0mp1.k69v1.64_P60
Switch protocol...
MD_CHIP: MT6785
MD_SWTM: 2000.00.00
MD_DSPV: 1.0
MD_DSPP: MOLY.LR13.R1.MP.V89.5.P64
MD_SWVR: LCSH_XM_R0MP1_MT6785_SP_HW
MD_HWVR: Unknown

IMEI[1]: FFFFFFFFFFFFFFF
IMEI[2]: FFFFFFFFFFFFFFF


IMEI[2]: 82467883
Item: update Ok
Done: 00:02:14
Reconnect Power/Cable now