Çözüldü ZTE Blade V7 Lite IMEI Repair İşlemi

[jumyaz]

ZTE Blade V7 Lite Imei repair

Android 6.0
MT 6735P

BaseBand CPU :MT6735M
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB  DRAM
----------------------------------------------------
EMMC: (116Gb+16384Mb) SAMSUNG 0x513331334d42
EMMC FW VERSION: 06:00:00:00:00:00:00:00
EMMC CID: 150100513331334D42 : 00000000000000
EMMC UA SIZE: 0x3a3e00000   
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3a4a00000      [14.572 GB]
-Reading GPT Drive OK
Status: USB_FULL_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM6)
Dumping data, wait.
Reading imei
IMEI[1]: 35**************
IMEI[2]: 35**************
Backup saved: C:\Users\jumyaz\Documents\Android_MTK\nvram_backup\FLASH_MODE_NVRAM_MT6735M_351903741754808_351410764912404_09_06_2018_13_33_07.zip
Writing imei
IMEI[1] TO UPDATE: 3556450463*****
IMEI[2] TO UPDATE: 3556450463/***
Generic IMEI OK
Processing dinamic imei.
IMEI[1] TO UPDATE: 355645046*****
IMEI[2] TO UPDATE: 3556450463****
Wait untill phone will start charging.
All done.

 

[battal46]

mrb usta ZTE lite V7 Lite Imei repair oluyormu android sürümü 6.0

 

[Kerem47]

mrb usta ZTE lite V7 Lite Imei repair oluyormu android sürümü 6.0

Maui meta ile denedinizmi

 

[silivriserdar]

 Selected connection metod: Flash Connection
 Exe version: NCKDongle AndroidMTK 2.7.7
 Selected phone: Blade V7
 Action : IMEI REPAIR.
 Phone must be off with battery inside.
 Battery must be charged
 Please insert USB cable now...
 For some phones need to keep "VOL-" button untill inserting USB cable.
 For some phones need to keep "VOL+ and VOL-" button untill inserting USB cable.
 For some phones need to keep "VOL+" button untill inserting USB cable.
 Detected(37) : MediaTek PreLoader USB VCOM (Android) (COM37)
 [37] \\?\usb#vid_0e8d&pid_2000#5&3a33fe6e&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
 Boot mode: Preloader
 BBCHIP: 335 0 ca00
 Using Algo 2.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6735M
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 2 GB  DRAM
 ----------------------------------------------------
 EMMC: (116Gb+16384Mb) SAMSUNG 0x513331334d42
 EMMC FW VERSION: 06:00:00:00:00:00:00:00
 EMMC CID: 150100513331334D42 : 00000000000000
 EMMC UA SIZE: 0x3a3e00000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3a4a00000      [14.572 GB]
 Status: USB_FULL_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected(32) : MediaTek DA USB VCOM (Android) (COM32)
 [32] \\?\usb#vid_0e8d&pid_2001#5&3a33fe6e&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
 Dumping data, wait.
 Reading imei
 IMEI[1]:
 IMEI[2]: fffffffffffffff
 Backup saved: C:\ProgramData\Android_MTK_Backup_Folder\nvram_backup\FLASH_MODE_NVRAM_MT6735M_861690030266015_fffffffffffffff_06_04_2022_17_07_10.zip
 Writing imei
 IMEI[1] TO UPDATE:
 IMEI[2] TO UPDATE:
 Generic IMEI OK