Ustam n960f 512 gb oem açık u3 rom yüklü 2 kez denedim twrp de wipe yapmıyor sanırım cihaz hafızasını tanımıyor. açıldığındada sıfırlama uyarısı alıyorum
N960F U2 9.0 yazılım yükledim daha sonra burdaki dosyayı hafıza kartına yükledim twrp yaptım herşey başarılı ama magisk root gelmiyo ekrana oem açmaya çalışıyorum cihazı sıfırlamak istiyor nasıl yapabilirim acaba
merhaba arkadaşlar ilk etapta yukarıda verilen root işlemlerini halletim ancak menuye herhangı root menusu gelmıyor ayrıca oem kilidi açılmıyor bende sizin gibi chımeradan kg yaptım ama hata verıyor sonradan magisk apk netten indirip yükledim sonra magıske gırıp güncelle dedim ardından chimeradan patch sert yaptım sonuç başarılı yanı illa oem kilidi açmanıza gerek yok twrp yüklemek için şart zaten onuda cihazı sıfırladıgında otomatık açılıyor egerkı menude goremezsenız nete bağlaarsınız otomatık oem göüzekecvektir log yapyaşıyım bide sizinle
Preparing...
Checking current patchcert.
Checking modem.
Checking root.
The phone is rooted by: 18.0:MAGISKSU (topjohnwu)
Checking boot image. Be patient! Do NOT disconnect the phone!
The knox is still valid. Because of the boot patch the warranty will void.
Writing boot image.
Restarting phone.
Waiting for ADB connection. Be patient! Do NOT disconnect the phone!
Reading data...
Checking modem version.
Restarting phone.
Waiting for ADB connection. Be patient! Do NOT disconnect the phone!
Reading data. Be patient! Do NOT disconnect the phone!
Reading data...
Checking modem version.
Restarting phone.
Waiting for ADB connection. Be patient! Do NOT disconnect the phone!
Reading data. Be patient! Do NOT disconnect the phone!
Patching certificate...
The operation is in progress. Be patient! Do NOT disconnect the phone!
After the phone starts, it switches to flying mode and then returns to normal mode after 20-70 seconds.
Do not check the status of the imei! It is important that the SIM card is on the phone at startup and the PIN authentication is turned OFF.
The patchcert can be removed by repeating the process.
If a new firmware is used, the patchcert process must be repeated.
Succeeded.
Successfully finished.
Finished at local time: [10.01.19 12:45:10]
WorkID: 74790399