silivriserdar
Genel Moderator
- Katılım
- 21 Haz 2018
- Mesajlar
- 22,083
- Tepkime puanı
- 44,944
- Puanları
- 113
- Yaş
- 40
Çevrimdışı
Merhaba arkadaşlar bu paylaşacağım konuda Vodafone Smart Mini 785 cihazının NCK Dongle Android MTK ile nasıl yazılımı çekillir onu anlatacağım.
Buişlem için elinizde NCK Dongle olması lazım bu araç ücretli bir araçtır ve genellikle cep telefonu satan yerlerde mevcuttur.
NCK Donlge Android MTK Tool açın ve MT6572 seçin Full Flash seçin Dump Firmware tıklayın ve cihazı kapalı vaziyette takın işlem başlayacaktır.
Buişlem için elinizde NCK Dongle olması lazım bu araç ücretli bir araçtır ve genellikle cep telefonu satan yerlerde mevcuttur.
NCK Donlge Android MTK Tool açın ve MT6572 seçin Full Flash seçin Dump Firmware tıklayın ve cihazı kapalı vaziyette takın işlem başlayacaktır.
Kod:
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM7)
Boot mode: Preloader
BBCHIP: 6572 0 ca00
Using Algo 1.
Scatter file loaded, not need emmi.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6572
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) TOSIBA 0x303034473930
EMMC FW VERSION: 10:00:00:00:00:00:00:00
EMMC CID: 110100303034473930 : 00000000000000
EMMC UA SIZE: 0xec000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xec480000 [3.692 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM49)
Build ID: JDQ39
Display ID: Jelly Bean
Version: 4.2.2
Build Date: Thu Feb 13 15:46:30 CST 2014
Model: Vodafone 785
Brand: Vodafone
Device: Vodafone_785
Manufacturer: Vodafone
Region: TR
Mediatek Version Release: ALPS.JB3.MP.V1
Dumping Preloader.
Start dumping flash, this can take up to 1 hour.......
Start processing PRELOADER ......
Reading: BEGIN: 0x0 - LEN: 0x1000000
Start processing MBR
Reading: BEGIN: 0x1000000 - LEN: 0x200
Start processing EBR1
Reading: BEGIN: 0x1080000 - LEN: 0x200
Start processing proinfo
Reading: BEGIN: 0x1100000 - LEN: 0x300000
Start processing nvram
Start processing PROTECT_F
Reading: BEGIN: 0x1900000 - LEN: 0xa00000
Start processing PROTECT_S
Reading: BEGIN: 0x2300000 - LEN: 0xa00000
Start processing UBOOT ......
Start processing BOOTIMG
Start processing RECOVERY
Start processing secro
Reading: BEGIN: 0x5580000 - LEN: 0x600000
Start processing LOGO ......
Start processing EBR2
Reading: BEGIN: 0x5f00000 - LEN: 0x200
Start processing custpack
Reading: BEGIN: 0x5f80000 - LEN: 0x2da00000
Start processing mobile_info
Reading: BEGIN: 0x33980000 - LEN: 0x800000
Start processing system
Reading: BEGIN: 0x34b80000 - LEN: 0x20800000
Saved to : C:\Users\SERDAR\Documents\Android_MTK\firmware_backup\MT6572_EMMC_Vodafone_Vodafone 785_4_2_2_ALPS_JB3_MP_V1(2019_01_31_13_53)
Wait untill phone will start charging.
All done.