- Katılım
- 31 Eki 2018
- Mesajlar
- 2,283
- Tepkime puanı
- 19,004
- Puanları
- 113
Çevrimdışı
Kod:
Welcome to Octoplus Huawei Software v. 1.3.3
To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode
To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode
To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'
Found COM ports:
1: COM6 HUAWEI USB COM 1.0
Job ID: 0000000001B0C60C
2023-02-24 15:43:29
Starting Reset Huawei ID
Selected phone model: AGS3-W09
Searching HUAWEI USB COM 1.0 port...
Detected HUAWEI USB COM 1.0 port
Phone connect successfully
Writing bootloader KIRIN710_V1...
Initializing remote service connection...
Downloading resource...
Writing XLOADER partition...
Writing UCE partition...
Reset Huawei ID failed.
Performed by 1.3.3 Software version.
Job ID: 0000000001D7D851
2023-02-24 15:49:41
Starting Reset Huawei ID
Selected phone model: AGS3-W09
Searching HUAWEI USB COM 1.0 port...
Detected HUAWEI USB COM 1.0 port
Phone connect successfully
Writing bootloader KIRIN710_V1...
Initializing remote service connection...
Writing XLOADER partition...
Writing UCE partition...
Canceling... Please be patient!
Reset Huawei ID failed.
Performed by 1.3.3 Software version.
Job ID: 0000000001B0C6B2
2023-02-24 15:51:36
Starting Reset Huawei ID
Selected phone model: PPA-LX2
Searching HUAWEI USB COM 1.0 port...
Detected HUAWEI USB COM 1.0 port
Phone connect successfully
Writing bootloader KIRIN710A_V3...
Initializing remote service connection...
Downloading resource...
Writing XLOADER partition...
Writing UCE partition...
Writing FASTBOOT partition...
Operation in progress. Please wait for instructions...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found android device: 47BNU20C01203107
Detected Android Sooner Single ADB Interface port
Reading basic data...
Device Model: AGS3-W09
System: AGS3-W09 10.1.0.256(C432E2R1P1)
Android Version: 10
Base Version: AGS3-LGRP10-OVS 10.1.0.256
Custom Version: AGS3-W09-CUST 10.1.0.2(C432)
Preload Version: AGS3-W09-PRELOAD 10.1.0.1(C432R1)
C_Version: C432
D_Version: D000
FB Lock State: LOCKED
User Lock State: LOCKED
Downloading resource...
Connecting to the credit server...
Username: Default_user
Checking balance...
Your balance: 0 credits
Sending device information...
Sending firmware information...
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: UNLOCKED
User Lock State: LOCKED
Device Model: AGS3-W09
System: AGS3-W09 10.1.0.256(C432E2R1P1)
IMEI A: 47BNU20C0120310
S/N: 47BNU20C01203107
Resetting Huawei ID...
Rebooting device...
Warning: Please perform "Clear data" manually via Recovery Mode, if your device doesn`t start properly!
Reset Huawei ID done.
Performed by 1.3.3 Software version.