Çevrimdışı
Merhaba arkadaşlar, sizlere Huawei Y6 2019 (MRD-LX3) modelinde IMEI Repair işlemini göstereceğim. Ben bu işlemi Tr Tools Pro ile yaptım. Bu araç ücretli olup genelde cep telefonu tamiri yapan yerlerde mevcuttur.
Lütfen konu altına yorum yaparken Teşekkürler, Elinize sağlık, süper, sağol, helal olsun gibi kelimeler yazıp konuları kirletmeyelim. Herkes aradığını bu mesajlar yüzünden bulamıyor. Altta beğen butonuna basmanız yeterlidir. Konu ile ilgili sorununuzu veya çözümünüz varsa yorum yapın. Konu ile alakasız cevaplar silinecektir.
REPAIR LOG
Lütfen konu altına yorum yaparken Teşekkürler, Elinize sağlık, süper, sağol, helal olsun gibi kelimeler yazıp konuları kirletmeyelim. Herkes aradığını bu mesajlar yüzünden bulamıyor. Altta beğen butonuna basmanız yeterlidir. Konu ile ilgili sorununuzu veya çözümünüz varsa yorum yapın. Konu ile alakasız cevaplar silinecektir.
REPAIR LOG
Kod:
Program version : 1.0.4.3
Process name : Mtk Imei Repair (Flash Mode)
Process model name : Huawei Y6 2019 (MRD-LX3)
LibUsb checking and installing. Succesfuly
Preloader mode: Turn off the device and plug in a usb cable.
Brom mode: Turn off the device, connect the usb cable by pressing the volume up and down button.
Waiting preloader or brom port. Found.
Port Information :
Name : MediaTek USB Port
Number : 330
Path : \\.\usb#vid_0e8d&pid_0003#5&11b683d3&0&3#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Connection Mode : Brom
Connect mtk port. Succesfuly
Connecting brom mode. Succesfuly
Reading cpu information. Succesfuly
Cpu name : MT6761/MT6762/MT3369/MT8766B (Helio A20/P22/A22/A25/G25)
Hardware code : 0x00000717
Hardware sub code : 0x8A00
Hardware version : 0xCA00
Sw version : 0x0200
Disabling watchdog. Succesfuly
Get config target. Succesfuly
SBC status : Active
SLA status : Passive
DAA status : Active
SWJTAG status : Active
EPP_PARAM at 0x600 after EMMC_BOOT/SDMMC_BOOT : Passive
Root cert required : Passive
Memory read auth : Active
Memory write auth : Active
Cmd 0xC8 blocked : Active
Get meid. Succesfuly
Meid : 6E782649C9839B3F8B96025703D46D38
Get socid. Succesfuly
Meid : 0C09F846FD746A5416FECA5C2D3402EB576C76637C31F0968CF3BEF1F12876E4
Security bypass methot : Kamakiri2
Bypass security. Succesfuly
Connecting brom mode. Succesfuly
Reading emi from device. Succesfuly
Loading preloader file. Succesfuly
Emi name : preloader_k61v1_64_mexico.bin
Emi version : V116
Searching da from server. Succesfuly
Da load mode : Stream
File is being verified. Succesfuly
Loading da file. Succesfuly
Da version : MTK_AllInOne_DA_v3.3001.09/05/2021.05:41_572394
Da identifier : MTK_DOWNLOAD_AGENT
Search entry. Succesfuly
Flash protocol : XFlash
Sending boot. Succesfuly
Jump first boot. Succesfuly
Set flash mode device. Succesfuly
Get flash mode. Succesfuly
Flash mode : brom
Get ram information. Succesfuly
SRAM size : 233 KB (0x0000000000200000)
DRAM size : 233 KB (0x0000000000200000)
Get storage information. Succesfuly
Send emi data. Succesfuly
Send second boot. Succesfuly
Get storage information. Succesfuly
Storage type : eMMC
Disk size : 29.12 GB
Disk cid : QD63M
Check storage life. Succesfuly
Reading device partition. Succesfuly
Part count : 47
Download protocol start. Succesfuly
Reading device information. Part not found.
Backup nvram file. Succesfuly
Backup count : 8
Path : C:\Program Files (x86)\Tr Tools PRO\Backup\Mtk\Calibration\Flash Mode\Y6 2019 (MRD-LX3)-2022-06-27-10-52-08.tr
Reading imei number. Succesfuly
1. Imei number : 8*************
2. Imei number : NULL
Fast methot init. Succesfuly
First imei calculation from server. Succesfuly
The calculated file is written to the device. Succesfuly
Clear calibration data. Succesfuly
Download protocol finish. Succesfuly
Reboot device. Succesfuly
Process status : Successful