Çevrimdışı
Merhaba GSM Turkey Üyeleri bu paylaşacağım konuda Y9 Prime 2019 STK-L21 cihazına ait IMEI Repair Cert Method başarı raporunu paylaşacağım. Ben bu işlemi Octoplus Box ile yaptım. Bu araç ücretli bir araçtır.
TEST POINT
TEST POINT
Kod:
Welcome to Octoplus Huawei Software v. 1.3.3.1
To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode
To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode
To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'
Found COM ports:
1: COM1 İletişim Bağlantı Noktası
2: COM71 HUAWEI USB COM 1.0
Job ID: 000000000207C1B5
2023-06-17 09:09:43
Starting Read Cert
Selected phone model: PPA-L02
Searching HUAWEI USB COM 1.0 port...
Detected HUAWEI USB COM 1.0 port
Phone connect successfully
Writing bootloader KIRIN710A_V3...
Initializing remote service connection...
Writing XLOADER partition...
Writing UCE partition...
Writing FASTBOOT partition...
Operation in progress. Please wait for instructions...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found android device: 78KNW19B29016242
Detected Android Sooner Single ADB Interface port
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: UNLOCKED
User Lock State: LOCKED
Device Model: STK-L21
System: STK-L21MDV 12.0.0.231(C185E5R2P1)
Reading certificate files...
Reading certificate for IMEI A...
Reading certificate for IMEI B...
Rebooting device...
Read Cert done.
Performed by 1.3.3.1 Software version.
Selected IMEI_B file: C:/Users/Sena İletişim/Desktop/STK-L21_IMEI_SLOT_2_867485048025725.obf
Selected IMEI_A file: C:/Users/Sena İletişim/Desktop/POT-LX1_IMEI_SLOT_1_869130042552435.obf
Job ID: 000000000207C329
2023-06-17 09:20:28
Starting Write Cert
Selected phone model: PPA-L02
Searching HUAWEI USB COM 1.0 port...
Detected HUAWEI USB COM 1.0 port
Phone connect successfully
Writing bootloader KIRIN710A_V3...
Initializing remote service connection...
Writing XLOADER partition...
Writing UCE partition...
Writing FASTBOOT partition...
Operation in progress. Please wait for instructions...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found android device: 78KNW19B29016242
Detected Android Sooner Single ADB Interface port
Username: Default_user
Connecting to the credit server...
Checking balance...
Your balance: 0 credits
Sending device information...
Sending firmware information...
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: UNLOCKED
User Lock State: LOCKED
Device Model: STK-L21
System: STK-L21MDV 12.0.0.231(C185E5R2P1)
MEID: 00000000000000
IMEI A:
IMEI B:
S/N:
Saving backup of MODEM_SECURE...
Saving backup of OEMINFO...
Reading secure data...
Writing certificate files...
Warning: Can`t find imei block!
Warning: The oeminfo partition may be corrupted. In case of imei was not changed properly, you need to restore oeminfo partition!
Rebooting device...
Write Cert done.
Performed by 1.3.3.1 Software version.Lütfen konu altına yorum yaparken Teşekkürler, Elinize sağlık, süper, sağol, helal olsun gibi kelimeler yazıp konuları kirletmeyelim. Herkes aradığını bu mesajlar yüzünden bulamıyor. Altta beğen butonuna basmanız yeterlidir. Konu ile ilgili sorununuzu veya çözümünüz varsa yorum yapın. Konu ile alakasız cevaplar silinecektir.