silivriserdar
Genel Moderator
- Katılım
- 21 Haz 2018
- Mesajlar
- 21,985
- Tepkime puanı
- 44,672
- Puanları
- 113
- Yaş
- 40
Çevrimdışı
Merhaba GSM Turkey Üyeleri bu paylaşacağım konuda Onno SV-M3 cihazının yazılımı nasıl çekilir onu anlatacağım.
Bu işlemi yapabilmek için elinizde NCK Dongle olması lazım. Bu araç ücretli bir araçtır ve genellikle cep telefonu tamir yapan yerlerde mevcuttur.
Bu işlemi yapabilmek için elinizde NCK Dongle olması lazım. Bu araç ücretli bir araçtır ve genellikle cep telefonu tamir yapan yerlerde mevcuttur.
Kod:
Action : Read Firmware.
Selected 0-By CPU:ELBRUS
Exe version: NCKDongle AndroidMTK 2.7.1
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM23)
Boot mode: Preloader
BBCHIP: 6580 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) MICRON 0x50314a39354c
EMMC FW VERSION: 12:00:00:00:00:00:00:00
EMMC CID: FE014E50314A39354C : 00000000000000
EMMC UA SIZE: 0x1d3000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d3600000 [7.303 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM80)
[system]Reading info, wait...
Build ID: LMY47I
Display ID: LMY47I test-keys
Version: 5.1
Build Date: Mon Dec 17 15:12:32 CST 2018
Model: onno sv-m3
Brand: alps
Device: onno sv-m3
Manufacturer: alps
Region: US
Model: onno sv-m3
Device: onno sv-m3
Model: SM-G611FF
Device: SM-G611FF
Model: SM-G611FF
Device: SM-G611FF
Mediatek Version Release: ALPS.L1.MP6.V2.19_HCT6580.WEG.A.L_P55
FRP partition: /dev/block/platform/mtk-msdc.0/by-name/frp
IMEI[1]:
IMEI[2]
Start dumping flash, this can take up to 1 hour.......
Dumping Preloader.
Partition: proinfo
Partition: nvram
Partition: protect1
Partition: protect2
Partition: seccfg
Partition: lk
Partition: boot
Partition: recovery
Partition: para
Partition: logo
Partition: expdb
Partition: frp
Partition: nvdata
Partition: metadata
Partition: oemkeystore
Partition: secro
Partition: keystore
Partition: system
Partition: cache
Partition: userdata
Partition: flashinfo
Start processing proinfo.bin ......
Reading: BEGIN: 0x80000 - LEN: 0x300000
Start processing nvram.bin ......
Reading: BEGIN: 0x380000 - LEN: 0x500000
Start processing protect1.img ......
Reading: BEGIN: 0x880000 - LEN: 0xa00000
Start processing protect2.img ......
Reading: BEGIN: 0x1280000 - LEN: 0xa00000
Start processing lk
Start processing boot
Start processing recovery
Start processing logo ......
Start processing secro secro.img
Reading: BEGIN: 0x9a00000 - LEN: 0x600000
Start processing system
Reading: BEGIN: 0xa800000 - LEN: 0x60000000
Saved to : C:\ProgramData\Android_MTK_Backup_Folder\firmware_backup\MT6580_EMMC_LMY47I__5_1_onno sv-m3_alps_onno sv-m3_SM-G611FF_SM-G611FF_2020_12_24_01_10)
Wait untill phone will start charging.
[0]All done.