- Katılım
- 21 Haz 2018
- Mesajlar
- 11,498
- Tepkime puanı
- 28,085
- Puanları
- 113
Çevrimdışı
Merhaba GSM Turkey Üyeleri bu paylaşacağım konuda Reeder P10C cihazının yazılımı nasıl çekilir onu anlatacağım.
Bu işlemi yapabilmek için elinizde NCK Dongle olması lazım. Bu araç ücretli bir araçtır ve genellikle cep telefonu tamir yapan yerlerde mevcuttur.
NCK Dongle Android MTK Tool'u açın ve Dump Firmware tıklayın. Ardından cihazı kapalı şekilde bağlayın.
Bu işlemi yapabilmek için elinizde NCK Dongle olması lazım. Bu araç ücretli bir araçtır ve genellikle cep telefonu tamir yapan yerlerde mevcuttur.
NCK Dongle Android MTK Tool'u açın ve Dump Firmware tıklayın. Ardından cihazı kapalı şekilde bağlayın.
Kod:
Action : Read Firmware.
Selected 0-By CPU:ELBRUS
Exe version: NCKDongle AndroidMTK 2.6.3
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM25)
Boot mode: Preloader
BBCHIP: 321 0 ca00
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6735
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (116Gb+8192Mb) SAMSUNG 0x513858534142
EMMC FW VERSION: 06:00:00:00:00:00:00:00
EMMC CID: 150100513858534142 : 00000000000000
EMMC UA SIZE: 0x3a3e00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3a4a00000 [14.572 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM26)
Build ID: LRX21M
Version: 5.0
Build Date: Mon Apr 25 14:16:50 CST 2016
Region: TR
Display ID: P10C
Model: P10C
Brand: Reeder
Device: P10C
Manufacturer: Reeder
Mediatek Version Release: GBL7325TR_0302_T5944
IMEI[1]: xxx
IMEI[2]: xxx
Dumping Preloader.
Partition: proinfo
Partition: nvram
Partition: protect1
Partition: protect2
Partition: lk
Partition: para
Partition: boot
Partition: recovery
Partition: logo
Partition: expdb
Partition: seccfg
Partition: oemkeystore
Partition: secro
Partition: keystore
Partition: tee1
Partition: tee2
Partition: frp
Partition: nvdata
Partition: metadata
Partition: system
Partition: cache
Partition: userdata
Partition: flashinfo
Start dumping flash, this can take up to 1 hour.......
Start processing proinfo
Reading: BEGIN: 0x80000 - LEN: 0x300000
Start processing nvram
IMEI[1] from NVRAM: xxx
IMEI[2] from NVRAM: xxx
Start processing protect1 ......
Reading: BEGIN: 0x880000 - LEN: 0xa00000
Start processing protect2 ......
Reading: BEGIN: 0x1280000 - LEN: 0xa00000
Start processing lk
Start processing boot
Start processing recovery
Start processing logo ......
Start processing secro secro.img
Reading: BEGIN: 0x5200000 - LEN: 0x600000
Start processing trustzone
Start processing frp ......
Reading: BEGIN: 0x6a00000 - LEN: 0x100000
Start processing nvdata ......
Reading: BEGIN: 0x6b00000 - LEN: 0x2000000
Start processing system
Reading: BEGIN: 0xb000000 - LEN: 0xa0000000
Saved to : C:\Users\Admin\Documents\Android_MTK\firmware_backup\MT6735_EMMC_LRX21M__5_0_P10C_Reeder_2020_01_11_19_44)
Wait untill phone will start charging.
[0]All done.[/B]
Moderatör tarafında düzenlendi: