Samsung Galaxy A5 SM-A510F U8 Combination Need [A510FXXS8CSC1]

  • Konbuyu başlatan Maxime Ges
  • Başlangıç tarihi
Wait For U8 binary combination avarage Published 2-3 months later.
 
s8 yeni versiyon mu u serisi combinasyon gösteremedim :( ??
 
cihaz recovery modunda a510fxuus8cd2 gözüküyor frp için ne rom nede çözüm bulamadım z3x den ?
 
a510f u8 frp solustion - GSM-Forum

Welcome to Octoplus Box Samsung software version 2.7.7.5
-----------------------------------------------------------------------------------
To connect GT-I9100G phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#7284#" number.
7. Set "USB" radio button to "PDA" value.
8. Press Home button.
9. Go to dial window.
10. Enter "*#9090# or *#0808#" number.
11. Set "Diag config" to "USB" value.
12. Restart phone.
13. Press "Read Info" in software.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM5
Selected model: SM-A510F
Operation: Reset FRP - UART EMMC
Searching for UART interface.. COM5
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Rebooting phone in Upload Mode...OK
Please connect phone to USB cable..
Searching for a phone. Please wait...OK
Reading data...
Checking operation...OK
Searching for UART interface.. COM5
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Searching for UART interface.. COM5
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Resetting FRP lock..success
FRP / Reactivation lock is successfully reseted!
Performed by 2.7.7.5 Software version.
 
turkcellgsm' Alıntı:
a510f u8 frp solustion - GSM-Forum

Welcome to Octoplus Box Samsung software version 2.7.7.5
-----------------------------------------------------------------------------------
To connect GT-I9100G phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#7284#" number.
7. Set "USB" radio button to "PDA" value.
8. Press Home button.
9. Go to dial window.
10. Enter "*#9090# or *#0808#" number.
11. Set "Diag config" to "USB" value.
12. Restart phone.
13. Press "Read Info" in software.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM5
Selected model: SM-A510F
Operation: Reset FRP - UART EMMC
Searching for UART interface.. COM5
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Rebooting phone in Upload Mode...OK
Please connect phone to USB cable..
Searching for a phone. Please wait...OK
Reading data...
Checking operation...OK
Searching for UART interface.. COM5
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Searching for UART interface.. COM5
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Resetting FRP lock..success
FRP / Reactivation lock is successfully reseted!
Performed by 2.7.7.5 Software version.[/QUOT
Genişletmek için tıkla ...
turkcellgsm' Alıntı:
a510f u8 frp solustion - GSM-Forum

Welcome to Octoplus Box Samsung software version 2.7.7.5
-----------------------------------------------------------------------------------
To connect GT-I9100G phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#7284#" number.
7. Set "USB" radio button to "PDA" value.
8. Press Home button.
9. Go to dial window.
10. Enter "*#9090# or *#0808#" number.
11. Set "Diag config" to "USB" value.
12. Restart phone.
13. Press "Read Info" in software.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM5
Selected model: SM-A510F
Operation: Reset FRP - UART EMMC
Searching for UART interface.. COM5
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Rebooting phone in Upload Mode...OK
Please connect phone to USB cable..
Searching for a phone. Please wait...OK
Reading data...
Checking operation...OK
Searching for UART interface.. COM5
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Searching for UART interface.. COM5
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Resetting FRP lock..success
FRP / Reactivation lock is successfully reseted!
Performed by 2.7.7.5 Software version.
Genişletmek için tıkla ...
anlamadığım konu cihazda menüye giremiyoruz nasıl *#7284# felan yapıcazda mod deyiştiricez zaten cihaz frp li menü yok açıklık getirebilirseniz seviniriz
 
Hsyn.2121' Alıntı:
Frp İşlemi Boxla Yaplmış
Genişletmek için tıkla ...
box la yapıldığını anladım usta sadece diyoya ingilizce cihazın ayarlarından usb hata ayıklamayı açın felan diye bak ilk başta verdiği direktifleri diyorum zaten menüye girmiyoruz nasıl hata ayıklama açıcaz orayı anlamadım dedim.
 
ismailalper' Alıntı:
box la yapıldığını anladım usta sadece diyoya ingilizce cihazın ayarlarından usb hata ayıklamayı açın felan diye bak ilk başta verdiği direktifleri diyorum zaten menüye girmiyoruz nasıl hata ayıklama açıcaz orayı anlamadım dedim.
Genişletmek için tıkla ...
İlk Başta Fark Etinse Farklı Bi Cİhaz Modeli Yazıyor Asıl Cİhaz cin Yazan Bilgiler Aşağıdaki Verdiğim Gibi
Platform: Samsung Android
Selected port: COM5
Selected model: SM-A510F
Operation: Reset FRP - UART EMMC
Searching for UART interface.. COM5
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Rebooting phone in Upload Mode...OK
Please connect phone to USB cable..
Searching for a phone. Please wait...OK
Reading data...
Checking operation...OK
Searching for UART interface.. COM5
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Searching for UART interface.. COM5
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Resetting FRP lock..success
FRP / Reactivation lock is successfully reseted!
Performed by 2.7.7.5 Software version.[/QUOT
 
Cevap yazmak için giriş yap yada kayıt ol.
Geri
Üst Alt