Çözüldü Samsung Galaxy A50 SM-A505F/FN Ana Konu

Merhaba arkadaşlar a50 root vs repair yapılıp sonrasında (Wipe Yapınca) şebeke gelmiyor.
Birde reboot yapınca çöken magisk sorununa hala bir çözüm bulunamadı mı. Netten baktım ama bulamadım
VIP bölümünde sorunsuz şekilde işlemleri nasıl yapılacağını detaylı anlatım anlattık.​
 
a505f u2 rooot dosyası indiremiyoruz google drive harici yükleyebilcek olan varmı ??
 
Merhaba GSM Turkey Üyeleri bu paylaşacağım konuda Samsung Galaxy A50 SM-A505F U2 IMEI Repair Firmware dosyasını paylaşacağım.


Bu yazılımı yükleyip ardından root yapın. Combination içinden ENG Modem yükleyin ve IMEI Repair işlemi yapın.
Çözüldü - Samsung Galaxy A50 SM-A505F U2 9.0 IMEI Repair İşlemi
İçinde hat varken kapatıp açınca şebeke gelmiyor
Hattı çıkar telefonu yeniden başlat
Hattı tak şebeke geliyor
REPAIR INSTRUCTIONS:
1. Power on the phone.
2. Enable 'USB debugging' in 'Settings'-'Developer options',
tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Reboot to...' button and select mode to reboot (download or recovery).

Operation: Repair
Selected model: SM-A505F
Software version: 38.2

Waiting ADB device... OK
Reading phone info...
Model: SM-A505F
Android version: 9
PDA version: A505FDDU2ASF2
CSC version: A505FOLE2ASF2
Phone version: A505FXXU2ASE1
Product code: SM-A505FZWCMID
CSC country code: INDONESIA
CSC sales code: XID
Phone SN: R58M46LQHDK
IMEI: xxxxxxxxxxxxxxxxxxx
HW version: MP0.400
RF cal date: 20190424
Chip name: EXYNOS9610
Modem board: SHANNON337
Security patch: 2019-06-01
Boot Warranty bit: 1
SIM State: ABSENT,ABSENT
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching server... OK
Checking server answer... OK
Executing... OK
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Writing security... OK
Rebooting phone... OK
Done with Samsung Tool PRO v.38.2




REPAIR INSTRUCTIONS:
1. Power on the phone.
2. Enable 'USB debugging' in 'Settings'-'Developer options',
tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Reboot to...' button and select mode to reboot (download or recovery).

Operation: Patch Certificate
Selected model: SM-A505F
Software version: 38.2

Waiting ADB device... OK
Reading phone info...
Model: SM-A505F
Android version: 9
PDA version: A505FDDU2ASF2
CSC version: A505FOLE2ASF2
Phone version: A505FXXU2ASE1
Product code: SM-A505FZWCMID
CSC country code: INDONESIA
CSC sales code: XID
Phone SN: R58M46LQHDK
IMEI: xxxxxxxxxxxxxxxxx
HW version: MP0.400
RF cal date: 20190424
Chip name: EXYNOS9610
Modem board: SHANNON337
Security patch: 2019-06-01
Boot Warranty bit: 1
SIM State: ABSENT,ABSENT
Checking Super user right... true
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching server... OK
Checking server answer... OK
Executing... OK
Searching server... OK
Waiting for server answer... OK
Patching... OK
Rebooting phone... OK
Done with Samsung Tool PRO v.38.2

Linki görmek için konuya yorum yapın ve sayfayı yenileyin link gözükecektir.




süper
 
Hi gsmturkey.net members Samsung Galaxy A50 MT6580 device read firmware success report will share this issue on the Replica.

CM2 Dongle is a paid professional tool and is generally available in mobile phone repair shops.

Kod:
 Start at: [2019-12-16 / 15:56:43]
Operation: Read Flash [v1.58]

1. Power Off Phone, Remove battery, Insert back
2. Insert USB cable. BootKey

Wait for phone ...
Phone found! [33]
Sync ...
Inital Boot Arrow!
BB_CPU_PID: 6580
BB_CPU_NME: [MediaTek] MT6580_S00
BB_CPU_EXT: 0xCA00, 0x8A00, 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal: 0x00000000
BromVer: 0x00FF
BLVersion: 0x0001
PreLoader: Active [Boot with PL]
BootLdrSS: NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID: 0x94
NAND Flash: NOT INSTALLED
eMMC Flash: 70010053313030303408BDFC5B818215
Initialize Memory ...
DRAM already initialized by Preloader
DAgent cents, init HW now
eMMC FlashIC initialized
[eMMC]: FLASH_VEN: 0x70, OEM: 0100
[eMMC]: FLASH_INF: [KINGSTON], 40001
[eMMC]: FLASH_CID: 70010053313030303408BDFC5B818215
[eMMC]: FLASH_BRT: 0x00400000, 0x00400000, 0x00400000
[eMMC]: FLASH_LEN: 0x00000000E4000000
[eMMC]: FLASH_UCP: 3648 MiB [eMMC 4 GiB]
DEV RID: 0x33B5140E106E1E6565742736B34BF7DF
INT RAM: 0x00020000
EXT RAM: 0x20000000 [512 MiB]
BOOT TYPE: EMMC_FLASH_BOOT
SOC VERIFY: C1
Boot Ok!

Reading Flash Content now ...

xGPT: Normalize settings Ok!

Brand: QMX
ProdName: Galaxy A50
ProdModel: SM-A505F
Device: SM-A505F
AndroidData: 9.0
MTKxCPU: MT6580
MTKxPRJ: ALPS.L1.MP6.V2_WEG.L_P73

[Read Ok]: preloader_aeon6580_weg_l_l100plus.bin
[Read Ok]: lk.bin
[Read Ok]: boot.img
[Read Ok]: recovery.img
[Read Ok]: logo.bin
[Read Ok]: secro.img
[Read Ok]: system.img
[Read Ok]: cache.img
[Read Ok]: userdata.img

[ScatCFG]: MT6580 / V1.1.2 / aeon6580_weg_l_l100plus / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size: 1160 MiB
Scatter saved to: C: \ Users \ User \ Documents \ MT6580__QMX__SM-A505F__SM-A505F__9.0__ALPS.L1.MP6.V2_WEG.L_P73 \

All done!

Done!
Elapsed: 00:08:42
Reconnect Power / Cable! [/ CODE][/B][/CENTER]
 
Geri
Üst Alt