Çözüldü Samsung Galaxy J7 SM-J700F U3 SIM Unlock

[silivriserdar]

Merhaba GSM Turkey Üyeleri bu paylaşacağım konuda Samsung Galaxy J7 SM-J700F U3 cihazına ait SIM unlock başarı raporunu paylaşacağım. Ben bu işlemi Z3X Box Samsung Tool ile yaptım. Bu araç ücretli bir araçtır.

Lütfen konu altına yorum yaparken Teşekkürler, Elinize sağlık, süper, sağol, helal olsun gibi kelimeler yazıp konuları kirletmeyelim. Herkes aradığını bu mesajlar yüzünden bulamıyor. Altta beğen butonuna basmanız yeterlidir. Konu ile ilgili sorununuzu veya çözümünüz varsa yorum yapın. Konu ile alakasız cevaplar silinecektir. ​

​

 UNLOCK INSTRUCTIONS:
To unlock NEW security type:
Phone must be rooted!
If the software can't root the phone automatically, 
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock' button and select 'New Unlock' for direct unlock.

To unlock OLD security type:
1. Power on the phone.
2. Connect the phone to PC with USB cable.
3. Check Samsung modem in device manager, install drivers if needed.
4. Press 'Unlock' button and select 'Unlock' for direct unlock.

To read security codes (all security types):
1. Power on the phone.
2. Connect the phone to PC with USB cable.
3. Check Samsung modem in device manager, install drivers if needed.
4. Press 'Read codes' button to read security codes.

To read security codes via diagnostic port:
1. Power on the phone.
2. Type *#0808# and select 'DM+MODEM+ADB'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Press 'Read Codes DIAG' button to read security codes.

To reset Google account activation lock:
1. ADB must be activated in any way (you can flash sBoot from combination firmware,
make sure, that you are not upgrade sBoot).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Select device in ADB settings.
4. Press 'Reset FRP' and follow the instructions in program.
5. When process done, press 'Back' on phone and perform factory reset from phone settings.

To reset Google account activation or Samsung reactivation lock:
1. Power on the phone in download mode (turn off phone, press vol.down + home + power).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Press 'Reset FRP/React/EE' to deactivate Google/Samsung/EE account activation lock.
4. After phone reboot, go to settings and perform factory reset. 

Operation: Unlock
Selected model: SM-J700F
Software version: 44.11

Waiting ADB device... OK
Reading phone info...
Model: SM-J700F
Android version: 6.0.1
PDA version: J700FXXU3BPJ1
CSC version: J700FOJV3BPJ2
Phone version: J700FXXU3BPJ1
Product code: SM-J700FZDDXSG
CSC country code: UAE
CSC sales code: XSG
Phone SN: RZ8H70KXA6X
IMEI: 
HW version: MP 0.701
RF cal date: 20160710
Chip name: EXYNOS7580
Modem board: SHANNON310
Security patch: 2016-10-01
Boot Warranty bit: 1
SIM State: NETWORK_LOCKED,ABSENT
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Unlocking... OK
Writing NV data... OK
Rebooting phone... OK
Unlock done
Done with Samsung Tool PRO v.44.11 [SM-J700F,Unlock]