Çevrimdışı
Merhaba Gsmturkey Üyeleri
Bugün Sizlere Samsung Galaxy Note 3 Neo SM-N7500Q Patch Certificate İşlemini Anlatacağım
Elinizde Z3x Olması Gerekiyor
Model Olarak T311 Seçip İşlem Yapabilirsiniz.
Bugün Sizlere Samsung Galaxy Note 3 Neo SM-N7500Q Patch Certificate İşlemini Anlatacağım
Elinizde Z3x Olması Gerekiyor
Model Olarak T311 Seçip İşlem Yapabilirsiniz.
REPAIR INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Fill values what you need to repair.
6. Press 'Repair' button.
7. Press 'Reset EFS' if you need to reset it.
Be carefully, do not perform this without necessity and make backup before.
8. Press 'Disable Factory Mode' or 'Patch Sertificate' if needed.
Operation: Repair
Selected model: SM-T311
Software version: 43.16
Waiting ADB device... OK
Reading phone info...
Model: SM-N7500Q
Android version: 4.4.2
PDA version: N7500QXXUCPJ1
CSC version: N7500QTURCPJ1
Phone version: N7500QJVUCNJ1
Product code: Not Active
CSC country code: TURKEY
CSC sales code: TUR
Phone SN:
IMEI:
HW version: Unknown
RF cal date: Unknown
Chip name: EXYNOS5260
Modem board: XMM6262
Security patch: 2016-10-01
Boot Warranty bit: 1
Incorrect model selected. This may damage your phone. Continue? Yes
Checking Super user right... true
Reading NV data... OK
Checking magic... OK
Running zTool, please wait... OK
Detected new type of security version 0
Calculating... OK
Writing NV Data... OK
Rebooting phone... OK
Repair done
Done with Samsung Tool PRO v.43.16
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Fill values what you need to repair.
6. Press 'Repair' button.
7. Press 'Reset EFS' if you need to reset it.
Be carefully, do not perform this without necessity and make backup before.
8. Press 'Disable Factory Mode' or 'Patch Sertificate' if needed.
Operation: Repair
Selected model: SM-T311
Software version: 43.16
Waiting ADB device... OK
Reading phone info...
Model: SM-N7500Q
Android version: 4.4.2
PDA version: N7500QXXUCPJ1
CSC version: N7500QTURCPJ1
Phone version: N7500QJVUCNJ1
Product code: Not Active
CSC country code: TURKEY
CSC sales code: TUR
Phone SN:
IMEI:
HW version: Unknown
RF cal date: Unknown
Chip name: EXYNOS5260
Modem board: XMM6262
Security patch: 2016-10-01
Boot Warranty bit: 1
Incorrect model selected. This may damage your phone. Continue? Yes
Checking Super user right... true
Reading NV data... OK
Checking magic... OK
Running zTool, please wait... OK
Detected new type of security version 0
Calculating... OK
Writing NV Data... OK
Rebooting phone... OK
Repair done
Done with Samsung Tool PRO v.43.16
REPAIR INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Fill values what you need to repair.
6. Press 'Repair' button.
7. Press 'Reset EFS' if you need to reset it.
Be carefully, do not perform this without necessity and make backup before.
8. Press 'Disable Factory Mode' or 'Patch Sertificate' if needed.
Operation: Patch Certificate
Selected model: SM-T311
Software version: 43.16
Waiting ADB device... OK
Reading phone info...
Model: SM-N7500Q
Android version: 4.4.2
PDA version: N7500QXXUCPJ1
CSC version: N7500QTURCPJ1
Phone version: N7500QJVUCNJ1
Product code: Not Active
CSC country code: TURKEY
CSC sales code: TUR
Phone SN:
IMEI:
HW version: Unknown
RF cal date: Unknown
Chip name: EXYNOS5260
Modem board: XMM6262
Security patch: 2016-10-01
Boot Warranty bit: 1
Incorrect model selected. This may damage your phone. Continue? Yes
Checking Super user right... true
Reading modem... OK
Patching modem... OK
Writing modem... OK
Rebooting phone... OK
Patching CERT check... done
Done with Samsung Tool PRO v.43.16
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Fill values what you need to repair.
6. Press 'Repair' button.
7. Press 'Reset EFS' if you need to reset it.
Be carefully, do not perform this without necessity and make backup before.
8. Press 'Disable Factory Mode' or 'Patch Sertificate' if needed.
Operation: Patch Certificate
Selected model: SM-T311
Software version: 43.16
Waiting ADB device... OK
Reading phone info...
Model: SM-N7500Q
Android version: 4.4.2
PDA version: N7500QXXUCPJ1
CSC version: N7500QTURCPJ1
Phone version: N7500QJVUCNJ1
Product code: Not Active
CSC country code: TURKEY
CSC sales code: TUR
Phone SN:
IMEI:
HW version: Unknown
RF cal date: Unknown
Chip name: EXYNOS5260
Modem board: XMM6262
Security patch: 2016-10-01
Boot Warranty bit: 1
Incorrect model selected. This may damage your phone. Continue? Yes
Checking Super user right... true
Reading modem... OK
Patching modem... OK
Writing modem... OK
Rebooting phone... OK
Patching CERT check... done
Done with Samsung Tool PRO v.43.16
