Çözüldü Samsung Galaxy S7 Edge SM-G935L U1 IMEI Patch Certificate

[silivriserdar]

Merhaba GSM Turkey Üyeleri bu paylaşacağım konuda Samsung Galaxy S7 Edge SM-G935L cihazına nasıl IMEI Patch Certificate İşlemi nasıl yapılır onu anlatacağım.

Root olarak EFT Pro kullanılmıştır.

Bu işlemi yapabilmek için elinizde Z3X Box olması lazım. Bu araç ücretli bir araçtır ve genellikle cep telefonu tamir yapan yerlerde mevcuttur.

Kullanılan Yazılım

HIZLI LİNK ​

REPAIR INSTRUCTIONS:
    Phone must be rooted!
  If the software can't root the phone automatically,
  then you must root your device manually.
  1. Power on the phone.
  2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
     go to 'Settings'-'Developer options' and enable 'USB debugging'.
  3. Connect the phone to PC with USB cable, install drivers if needed.
  4. Select device in ADB settings.
  5. Fill values what you need to repair.
  6. Press 'Repair' button.
  7. Press 'Patch Certificate' if you have network problem after repairing.
  7. Press 'Reset EFS' if you need to reset it.
     Be carefully, do not perform this without necessity. Backup will be created automatically.
 
    Repair DRK (Use it if you have DRK damaged (phone stuck on boot)):
  1. Power on the phone in download mode (turn off phone, hold vol.down + Camera + Power). 
  2. Connect the phone to PC with USB cable, install drivers if needed.
  3. Press 'Repair DRK' button.

Operation: Patch CERT
Selected model: SM-G935L
Software version: 42.9

Waiting ADB device... OK
Reading phone info...
Model: SM-G935L
Android version: 6.0.1
PDA version: G935LKLU1APDA
CSC version: G935LLUC1APDA
Phone version: G935LKLU1APD7
Product code:
CSC country code: KOREA
CSC sales code: LUC
Phone SN: R39J104CVX
IMEI: 351776077304194
HW version: REV0.8
RF cal date: 20170106
Chip name: EXYNOS8890
Modem board: SHANNON335
Security patch: 2016-05-01
Boot Warranty bit: 1
SIM State: READY
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Reading data... OK
Detecting MODEM... OK
Reading MODEM... OK
Calculating... OK
Writing zTool... OK
Initialization zTool... OK
Rebooting phone... OK
Patching CERT check... done

Done with Samsung Tool PRO v.42.9