Çözüldü UMT Dongle QcFire QcFire Tool Mi Account Sorunu

[elcin235]

Merhaba ustalar.Umt toola bazı redmi modellerin mi account kilidini kaldırdıkda telefon açıldıkdan sonra wifi açılmıyor (kilitleniyor) Bunu nasıl tamir ede bilirim?

Operation : Reset Mi Account
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM81)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1B00800 [SDM845] 00007200
OPK_DATA : 99AF649E077EBCE3E9E187442ABDC70BD715756DE9ED192E9F7883A10EBE09F4
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SDM845]...Done
Executing Loader...OK
Auth Enabled Device! You may need Mi Auth Account to service!
Skipping Auth...OK
Detecting Storage Type...OK
Hardware : SDM845, UFS, 64 GB
LU Count : 6 [0x00DC0800] [0x00000800] [0x00000800] [0x00002000] [0x00120000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi MI 8 [dipper]
Brand : Xiaomi
Prod.Name : dipper
Software : OPM1.171019.026, V10.0.2.0.OEAMIFH [Wed Sep 12 14:52:43 CST 2018]
Android Ver. : 8.1.0
Patch Level : 2018-08-01
Reading Data Backup...Done
Backup : persist_Xiaomi_MI 8_OPM1.171019.026_2018-08-01_221111_122358.img
Resetting Mi Account Data...Done
When phone is completely ON, connect to Internet and add Mi Account.
-------------- INFORMATION --------------
New Firmware may cause hang on logo.
In such case, you need to flash phone to recover.
Or downgrade firmware and try Reset Mi Account again.
Operation Finished.
QcFire Ver. 8.3
QcFire Ver. 8.3

 

[silivriserdar]

Merhaba ustalar.Umt toola bazı redmi modellerin mi account kilidini kaldırdıkda telefon açıldıkdan sonra wifi açılmıyor (kilitleniyor) Bunu nasıl tamir ede bilirim?

Operation : Reset Mi Account
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM81)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1B00800 [SDM845] 00007200
OPK_DATA : 99AF649E077EBCE3E9E187442ABDC70BD715756DE9ED192E9F7883A10EBE09F4
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SDM845]...Done
Executing Loader...OK
Auth Enabled Device! You may need Mi Auth Account to service!
Skipping Auth...OK
Detecting Storage Type...OK
Hardware : SDM845, UFS, 64 GB
LU Count : 6 [0x00DC0800] [0x00000800] [0x00000800] [0x00002000] [0x00120000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi MI 8 [dipper]
Brand : Xiaomi
Prod.Name : dipper
Software : OPM1.171019.026, V10.0.2.0.OEAMIFH [Wed Sep 12 14:52:43 CST 2018]
Android Ver. : 8.1.0
Patch Level : 2018-08-01
Reading Data Backup...Done
Backup : persist_Xiaomi_MI 8_OPM1.171019.026_2018-08-01_221111_122358.img
Resetting Mi Account Data...Done
When phone is completely ON, connect to Internet and add Mi Account.
-------------- INFORMATION --------------
New Firmware may cause hang on logo.
In such case, you need to flash phone to recover.
Or downgrade firmware and try Reset Mi Account again.
Operation Finished.
QcFire Ver. 8.3
QcFire Ver. 8.3

SON sürüm ile yazılım yükleme yaparak mi account Bypass yaparsanız sorun olmaz.​