- Katılım
- 21 Haz 2018
- Mesajlar
- 11,495
- Tepkime puanı
- 28,082
- Puanları
- 113
Çevrimiçi
Merhaba GSM Turkey Üyeleri bu paylaşacağım konuda Nokia 3 TA-1020 cihazının yazılımı nasıl çekilir onu anlatacağım.
Bu işlemi yapabilmek için elinizde NCK Dongle olması lazım. Bu araç ücretli bir araçtır ve genellikle cep telefonu tamir yapan yerlerde mevcuttur.
Dump Firmware tıklayın ve cihazı kapalı şekilde bağlayın.
Bu işlemi yapabilmek için elinizde NCK Dongle olması lazım. Bu araç ücretli bir araçtır ve genellikle cep telefonu tamir yapan yerlerde mevcuttur.
Dump Firmware tıklayın ve cihazı kapalı şekilde bağlayın.
Kod:
Action : Read Firmware.
Selected 0-By CPU:ELBRUS
Exe version: NCKDongle AndroidMTK 2.5.9.9
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM_V1632 (Android) (COM35)
Boot mode: Preloader
BBCHIP: 335 0 ca00
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6737M
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 02
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (117Gb+16384Mb) UNKNOWN_EMMC_DEVICE
EMMC FW VERSION: 10:00:00:00:00:00:00:00
EMMC CID: 13014E51324A393652 : 00000000000000
EMMC UA SIZE: 0x3ab400000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3ac000000 [14.688 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM41)
Build ID: PPR1.180610.011
Display ID: 00WW_5_180
Version: 9
Build Date: Wed Sep 25 21:52:50 CST 2019
Model: NE1
Brand: alps
Device: NE1
Manufacturer: alps
Dumping Preloader.
Start dumping flash, this can take up to 1 hour.......
Start processing proinfo
Reading: BEGIN: 0x80000 - LEN: 0x300000
Start processing nvram
IMEI[1] from NVRAM: xxxxxxxxxxxxxxx
IMEI[2] from NVRAM: xxxxxxxxxxxxxxx
Start processing protect1 ......
Reading: BEGIN: 0x880000 - LEN: 0xa00000
Start processing protect2 ......
Reading: BEGIN: 0x1280000 - LEN: 0xa00000
Start processing lk ......
Start processing boot
Start processing recovery
Start processing logo ......
Start processing secro
Reading: BEGIN: 0x5200000 - LEN: 0x600000
Start processing trustzone
Start processing box ......
Reading: BEGIN: 0x6a00000 - LEN: 0x800000
Start processing sys_info ......
Reading: BEGIN: 0x7200000 - LEN: 0x100000
Start processing sutinfo ......
Reading: BEGIN: 0x7300000 - LEN: 0x20000
Start processing hidden ......
Reading: BEGIN: 0x7320000 - LEN: 0x2000000
Start processing cda ......
Reading: BEGIN: 0x9320000 - LEN: 0x800000
Start processing frp ......
Reading: BEGIN: 0x9b20000 - LEN: 0x100000
Start processing nvdata ......
Reading: BEGIN: 0x9c20000 - LEN: 0x2000000
Start processing system
Reading: BEGIN: 0xe000000 - LEN: 0x100000000
Saved to : C:\Users\Admin\Documents\Android_MTK\firmware_backup\MT6737M_EMMC_alps_NE1_9_2019_11_18_17_47)
Wait untill phone will start charging.
[0]All done.[/B]
[ATTACH=full]8505[/ATTACH]
Ekli dosyalar
Moderatör tarafında düzenlendi: