Bilgi Xiaomi Redmi K20 Pro IMEI Repair (Qcn ile)

ogi · 10 Ocak 2020

shaildada' Alıntı:
[QUOTE = "ogi, post: 160507, member: 56575"] You will remove the blocks before twrp's terminal emulator. then wipe the data, cache, dalvik art cache. restart. Restore edited qcn from qpst. Andreboot.

Note: imei replacement can only be done in sim 2. [/ QUOTE]

Got it sir , one morequestion only have to edit imei as mentioned in the process or do we need to change meid also. and when you changed the imei youre on global rom or china rom.

No need to change meid, it is only used for usa. No matter what rom you want.

ogi · 10 Ocak 2020

shaildada' Alıntı:
[QUOTE = "ogi, post: 160507, member: 56575"] You will remove the blocks before twrp's terminal emulator. then wipe the data, cache, dalvik art cache. restart. Restore edited qcn from qpst. Andreboot.

Note: imei replacement can only be done in sim 2. [/ QUOTE]

Got it sir , one morequestion only have to edit imei as mentioned in the process or do we need to change meid also. and when you changed the imei youre on global rom or china rom.

in addition, edit only imei in sim 2. 1imei will be null.

shaildada · 10 Ocak 2020

[QUOTE = "Doktoralt post 118 665, member: 44 427"] Hi friends I would use later if you need a reason I bring that up because

I hope not banned

(Note: imei repair is not legal only to restore the imeiler deleted phones somehow)

Required Programs:
QUD.WIN.1.1 Installer-10037.3 Setup .zip (Windows 10)
MiPhone.rar (2016.04.01) (Let's Install)
raphael_global_images_v10.3.1.0.pfkmıxm_20190805.0000.00_9.0_global_135788d537.tgz
QPST . 2.7.477 .zip (SDM855 supported version) (Let's Install)
Minimal ADB and Fastboot (Install from Google
XVI32
TWRP-3.3.1-13
1. Clean Installation with MiFlash.
2. TWRP-3.3.1-13 We re-enter twrp setup after a simple system setup.
3. Take Our Efs Backup (This device is very problematic

).
4. We are downloading the Magisk Manager Apk file from our own site Open the MagiskManager apky and download the zip file required for root.
5. Enter the TWRP and click the install button to flash the zip file.
6. We install QPST.2.7.477 After the phone is turned on, we need to get diag mode.
In the minimal adb folder, click cmd-here.exe and open cmd.

Kod:

 adb devices (We will say that a warning will come to the phone after typing it ok)
adb shell
water (After writing this, the magisk on the phone will ask for permission to say allow it)
setprop sys.usb.config diag, adb
[/ CODE]
You can check your diag mod.
Run QPST Configuration in the QPST program.
7. Run QCNView in the QPST folder and save the hex codes. When we open QCNView there will be two tabs called tree view and text view.
[CODE] NV item (SIM 1): 550 [NV_UE_IMEI_I], index 0
               NV_UE_IMEI_I 0: xx xx xx xx xx xx xx xx xx 00 00 00 00 00 00 00 00 00
               NV_UE_IMEI_I 1: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
               NV_UE_IMEI_I 2:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
               NV_UE_IMEI_I 3:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
               NV_UE_IMEI_I 4:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
               NV_UE_IMEI_I 5:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
               NV_UE_IMEI_I 6:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
               NV_UE_IMEI_I 7:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
this is your imei number: xx xx xx xx xx xx xx xx (let's save it somewhere) [/ CODE]
bidet
[CODE] NV item: 1943 [NV_MEID_I], index 0
               NV_MEID_I 0: xx xx xx xx xx xx xx 00 00 00 00 00 00 00 00 00
               NV_MEID_I 1: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
               NV_MEID_I 2: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
               NV_MEID_I 3:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
               NV_MEID_I 4:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
               NV_MEID_I 5:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
               NV_MEID_I 6:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
               NV_MEID_I 7:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
            
this is your meid code NV_MEID_I 0: xx xx xx xx xx xx xx

NV item: 5598 [NV_MEID_ME_I], index 0
               NV_MEID_ME_I 0: xx xx xx xx xx xx xx 00 00 00 00 00 00 00 00 00
               NV_MEID_ME_I 1: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
               NV_MEID_ME_I 2:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
               NV_MEID_ME_I 3:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
               NV_MEID_ME_I 4:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
               NV_MEID_ME_I 5:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
               NV_MEID_ME_I 6:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
               NV_MEID_ME_I 7:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
            
this is your meid code NV_MEID_I 0: xx xx xx xx xx xx xx
[/ CODE]

let's note these hex codes somewhere
8. Copy your :) qcn backup to another location just in case we open the qcn file with the XVI32 program.
In the menu above, click the Search section, in the window that opens, find the hex string. Let's say xxx.qcn in this qcn file.
9.TWRP to open modemst1 modemst2 and fsg files stored in the phone memory will delete the paths

First of all, we will backup (just as the devil can fill :))
[CODE] dd if = / dev / block / bootdevice of / by-name / modemst1 = / sdcard / modemst1
dd if = / dev / block / bootdevice / by-name / of modemst2 = / sdcard / modemst2
dd if = / dev / block / bootdevice / by-name / of / fsg = / sdcard / fsg [/ CODE]
modemst1 modemst2 and fsg files.
Let's do this line by line after registration process
[CODE] dd if = / dev / zero of = / dev / block / bootdevice / by-name / modemst1
dd if = / dev / zero of = / dev / block / bootdevice / by-name / modemst2
dd if = / dev / zero of = / dev / block / bootdevice / by-name / fsg

Be careful when writing these lines [/ CODE]
After typing these lines, press the back button and come to the main page and press the button, click the advanced button.

Wipe Files:
[CODE] Dalvik / ART Cache
Cache
Data [/ CODE]

Mark the names and scroll the button to the right, then reboot and wait for the phone.

9. re-install the magisk manager apk file usb debugging After 10 seconds you will see a message explaining that the process is over, then turn the phone on and off. [/ QUOTE] [/ CODE]


did every step carefully, multiple times. till step 8. everything is fine. After erasing the modem phone shows imei zero (that means efs partition is formatted). but after that when i restore the edited qcn file. after restore phone got into bootloop. every time its rebooted to recovery. i have tried many times but evry time it goes to bootloop after qcn restore. help me.

the_lazor · 10 Ocak 2020

yaptım imei tmam da uçak modundan çıkın yazıyor

ogi · 11 Ocak 2020

shaildada' Alıntı:

[QUOTE = "Doktoralt post 118 665, member: 44 427"] Hi friends I would use later if you need a reason I bring that up because

I hope not banned

(Note: imei repair is not legal only to restore the imeiler deleted phones somehow)

Required Programs:
QUD.WIN.1.1 Installer-10037.3 Setup .zip (Windows 10)
MiPhone.rar (2016.04.01) (Let's Install)
raphael_global_images_v10.3.1.0.pfkmıxm_20190805.0000.00_9.0_global_135788d537.tgz
QPST . 2.7.477 .zip (SDM855 supported version) (Let's Install)
Minimal ADB and Fastboot (Install from Google
XVI32
TWRP-3.3.1-13
1. Clean Installation with MiFlash.
2. TWRP-3.3.1-13 We re-enter twrp setup after a simple system setup.
3. Take Our Efs Backup (This device is very problematic

).
4. We are downloading the Magisk Manager Apk file from our own site Open the MagiskManager apky and download the zip file required for root.
5. Enter the TWRP and click the install button to flash the zip file.
6. We install QPST.2.7.477 After the phone is turned on, we need to get diag mode.
In the minimal adb folder, click cmd-here.exe and open cmd.

Kod:

 adb devices (We will say that a warning will come to the phone after typing it ok)
adb shell
water (After writing this, the magisk on the phone will ask for permission to say allow it)
setprop sys.usb.config diag, adb
[/ CODE]
You can check your diag mod.
Run QPST Configuration in the QPST program.
7. Run QCNView in the QPST folder and save the hex codes. When we open QCNView there will be two tabs called tree view and text view.
[CODE] NV item (SIM 1): 550 [NV_UE_IMEI_I], index 0
               NV_UE_IMEI_I 0: xx xx xx xx xx xx xx xx xx 00 00 00 00 00 00 00 00 00
               NV_UE_IMEI_I 1: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
               NV_UE_IMEI_I 2:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
               NV_UE_IMEI_I 3:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
               NV_UE_IMEI_I 4:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
               NV_UE_IMEI_I 5:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
               NV_UE_IMEI_I 6:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
               NV_UE_IMEI_I 7:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
this is your imei number: xx xx xx xx xx xx xx xx (let's save it somewhere) [/ CODE]
bidet
[CODE] NV item: 1943 [NV_MEID_I], index 0
               NV_MEID_I 0: xx xx xx xx xx xx xx 00 00 00 00 00 00 00 00 00
               NV_MEID_I 1: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
               NV_MEID_I 2: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
               NV_MEID_I 3:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
               NV_MEID_I 4:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
               NV_MEID_I 5:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
               NV_MEID_I 6:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
               NV_MEID_I 7:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
            
this is your meid code NV_MEID_I 0: xx xx xx xx xx xx xx

NV item: 5598 [NV_MEID_ME_I], index 0
               NV_MEID_ME_I 0: xx xx xx xx xx xx xx 00 00 00 00 00 00 00 00 00
               NV_MEID_ME_I 1: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
               NV_MEID_ME_I 2:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
               NV_MEID_ME_I 3:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
               NV_MEID_ME_I 4:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
               NV_MEID_ME_I 5:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
               NV_MEID_ME_I 6:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
               NV_MEID_ME_I 7:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
            
this is your meid code NV_MEID_I 0: xx xx xx xx xx xx xx
[/ CODE]

let's note these hex codes somewhere
8. Copy your :) qcn backup to another location just in case we open the qcn file with the XVI32 program.
In the menu above, click the Search section, in the window that opens, find the hex string. Let's say xxx.qcn in this qcn file.
9.TWRP to open modemst1 modemst2 and fsg files stored in the phone memory will delete the paths

First of all, we will backup (just as the devil can fill :))
[CODE] dd if = / dev / block / bootdevice of / by-name / modemst1 = / sdcard / modemst1
dd if = / dev / block / bootdevice / by-name / of modemst2 = / sdcard / modemst2
dd if = / dev / block / bootdevice / by-name / of / fsg = / sdcard / fsg [/ CODE]
modemst1 modemst2 and fsg files.
Let's do this line by line after registration process
[CODE] dd if = / dev / zero of = / dev / block / bootdevice / by-name / modemst1
dd if = / dev / zero of = / dev / block / bootdevice / by-name / modemst2
dd if = / dev / zero of = / dev / block / bootdevice / by-name / fsg

Be careful when writing these lines [/ CODE]
After typing these lines, press the back button and come to the main page and press the button, click the advanced button.

Wipe Files:
[CODE] Dalvik / ART Cache
Cache
Data [/ CODE]

Mark the names and scroll the button to the right, then reboot and wait for the phone.

9. re-install the magisk manager apk file usb debugging After 10 seconds you will see a message explaining that the process is over, then turn the phone on and off. [/ QUOTE] [/ CODE]


did every step carefully, multiple times. till step 8. everything is fine. After erasing the modem phone shows imei zero (that means efs partition is formatted). but after that when i restore the edited qcn file. after restore phone got into bootloop. every time its rebooted to recovery. i have tried many times but evry time it goes to bootloop after qcn restore. help me.

try different qcn files.
- for redmi k20 pro.
https://gsmturkey.net/attachments/redmi-k20-pro_qcn_yeminoo-rar.7129/
Also, you will not delete "efs", you will delete blocks. followed by twrp's wipe data, cache, dalvic cache. and reboot. You're going to restore qcn.
"Blocks:
dd if=/dev/zero of=/dev/block/sdf5
dd if=/dev/zero of=/dev/block/sdf6
dd if=/dev/zero of=/dev/block/sde40
"

ogi · 11 Ocak 2020

shaildada' Alıntı:

[QUOTE = "Doktoralt post 118 665, member: 44 427"] Hi friends I would use later if you need a reason I bring that up because

I hope not banned

(Note: imei repair is not legal only to restore the imeiler deleted phones somehow)

Required Programs:
QUD.WIN.1.1 Installer-10037.3 Setup .zip (Windows 10)
MiPhone.rar (2016.04.01) (Let's Install)
raphael_global_images_v10.3.1.0.pfkmıxm_20190805.0000.00_9.0_global_135788d537.tgz
QPST . 2.7.477 .zip (SDM855 supported version) (Let's Install)
Minimal ADB and Fastboot (Install from Google
XVI32
TWRP-3.3.1-13
1. Clean Installation with MiFlash.
2. TWRP-3.3.1-13 We re-enter twrp setup after a simple system setup.
3. Take Our Efs Backup (This device is very problematic

).
4. We are downloading the Magisk Manager Apk file from our own site Open the MagiskManager apky and download the zip file required for root.
5. Enter the TWRP and click the install button to flash the zip file.
6. We install QPST.2.7.477 After the phone is turned on, we need to get diag mode.
In the minimal adb folder, click cmd-here.exe and open cmd.

Kod:

 adb devices (We will say that a warning will come to the phone after typing it ok)
adb shell
water (After writing this, the magisk on the phone will ask for permission to say allow it)
setprop sys.usb.config diag, adb
[/ CODE]
You can check your diag mod.
Run QPST Configuration in the QPST program.
7. Run QCNView in the QPST folder and save the hex codes. When we open QCNView there will be two tabs called tree view and text view.
[CODE] NV item (SIM 1): 550 [NV_UE_IMEI_I], index 0
               NV_UE_IMEI_I 0: xx xx xx xx xx xx xx xx xx 00 00 00 00 00 00 00 00 00
               NV_UE_IMEI_I 1: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
               NV_UE_IMEI_I 2:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
               NV_UE_IMEI_I 3:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
               NV_UE_IMEI_I 4:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
               NV_UE_IMEI_I 5:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
               NV_UE_IMEI_I 6:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
               NV_UE_IMEI_I 7:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
this is your imei number: xx xx xx xx xx xx xx xx (let's save it somewhere) [/ CODE]
bidet
[CODE] NV item: 1943 [NV_MEID_I], index 0
               NV_MEID_I 0: xx xx xx xx xx xx xx 00 00 00 00 00 00 00 00 00
               NV_MEID_I 1: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
               NV_MEID_I 2: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
               NV_MEID_I 3:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
               NV_MEID_I 4:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
               NV_MEID_I 5:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
               NV_MEID_I 6:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
               NV_MEID_I 7:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
            
this is your meid code NV_MEID_I 0: xx xx xx xx xx xx xx

NV item: 5598 [NV_MEID_ME_I], index 0
               NV_MEID_ME_I 0: xx xx xx xx xx xx xx 00 00 00 00 00 00 00 00 00
               NV_MEID_ME_I 1: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
               NV_MEID_ME_I 2:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
               NV_MEID_ME_I 3:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
               NV_MEID_ME_I 4:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
               NV_MEID_ME_I 5:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
               NV_MEID_ME_I 6:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
               NV_MEID_ME_I 7:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
            
this is your meid code NV_MEID_I 0: xx xx xx xx xx xx xx
[/ CODE]

let's note these hex codes somewhere
8. Copy your :) qcn backup to another location just in case we open the qcn file with the XVI32 program.
In the menu above, click the Search section, in the window that opens, find the hex string. Let's say xxx.qcn in this qcn file.
9.TWRP to open modemst1 modemst2 and fsg files stored in the phone memory will delete the paths

First of all, we will backup (just as the devil can fill :))
[CODE] dd if = / dev / block / bootdevice of / by-name / modemst1 = / sdcard / modemst1
dd if = / dev / block / bootdevice / by-name / of modemst2 = / sdcard / modemst2
dd if = / dev / block / bootdevice / by-name / of / fsg = / sdcard / fsg [/ CODE]
modemst1 modemst2 and fsg files.
Let's do this line by line after registration process
[CODE] dd if = / dev / zero of = / dev / block / bootdevice / by-name / modemst1
dd if = / dev / zero of = / dev / block / bootdevice / by-name / modemst2
dd if = / dev / zero of = / dev / block / bootdevice / by-name / fsg

Be careful when writing these lines [/ CODE]
After typing these lines, press the back button and come to the main page and press the button, click the advanced button.

Wipe Files:
[CODE] Dalvik / ART Cache
Cache
Data [/ CODE]

Mark the names and scroll the button to the right, then reboot and wait for the phone.

9. re-install the magisk manager apk file usb debugging After 10 seconds you will see a message explaining that the process is over, then turn the phone on and off. [/ QUOTE] [/ CODE]


did every step carefully, multiple times. till step 8. everything is fine. After erasing the modem phone shows imei zero (that means efs partition is formatted). but after that when i restore the edited qcn file. after restore phone got into bootloop. every time its rebooted to recovery. i have tried many times but evry time it goes to bootloop after qcn restore. help me.

If you failed again, give me a teamviewer id and password.

csessiz · 11 Ocak 2020

Doktoraltun' Alıntı:
şebeke var ama internet yok ise hattına ait 4.5g kapalı olabilirmi acaba

hatta ait turkcell 4,5 sim kart uygun telefon uygun degil falan yazıyor ama elle falan bağlandım sonra otomatik yaptım su an giriyor

ogi · 11 Ocak 2020

csessiz' Alıntı:
hatta ait turkcell 4,5 sim kart uygun telefon uygun degil falan yazıyor ama elle falan bağlandım sonra otomatik yaptım su an giriyor

Telefon çekmemiştir ondan gelmemiştir 4g

shaildada · 11 Ocak 2020

ogi' Alıntı:
If you failed again, give me a teamviewer id and password.

That would be great , please provide me suitable time . also how do i share details with you ?

ogi · 11 Ocak 2020

shaildada' Alıntı:
That would be great , please provide me suitable time . also how do i share details with you ?

you can write from here. But I'm not available right now. If you have a social media account, if you send a link, I will write to you.

shaildada · 11 Ocak 2020

ogi' Alıntı:
you can write from here. But I'm not available right now. If you have a social media account, if you send a link, I will write to you.

https://www.f**e***k.com/HowDareYuo

ogi · 11 Ocak 2020

shaildada' Alıntı:
https://www.f**e***k.com/HowDareYuo

I've written.

shaildada · 12 Ocak 2020

@shaildada,

ogi' Alıntı:
If you failed again, give me a teamviewer id and password.

Thanks Men , you were great help . thank you all of you guys who wrote this post and guided me through the problems.
ill write a detailed post about what im doing wrong and whats the actuall error .

ogi · 12 Ocak 2020

shaildada' Alıntı:
@shaildada,

Thanks Men , you were great help . thank you all of you guys who wrote this post and guided me through the problems.
ill write a detailed post about what im doing wrong and whats the actuall error .

You're welcome. Dostlar bugünde hindistanlı bir arkadaşın repair işlemini hallettik

aslankim34 · 13 Ocak 2020

adnanmirsad56' Alıntı:
Olmuyor

selam aleykum ustam mi9t pro her şey tamam qcn yüklüyorum şebeke yok
3...4 qcn denedim olmadı kendi qcn sinide denedim bi daha denedim yine şebeke yok
sen anlarsın bu çözülmeyen işlerden

ne yapayım. cihazı sıfırlamadım içinde bilgiler var diye ondan olabilirmi ??

ogi · 13 Ocak 2020

aslankim34' Alıntı:
selam aleykum ustam mi9t pro her şey tamam qcn yüklüyorum şebeke yok
3...4 qcn denedim olmadı kendi qcn sinide denedim bi daha denedim yine şebeke yok
sen anlarsın bu çözülmeyen işlerden ne yapayım. cihazı sıfırlamadım içinde bilgiler var diye ondan olabilirmi ??

Önce komutları twrp emülatörden gireceksin. Ardından twrpden wipe data,cache,dalvik sileceksin bunları silmezsen sorun olur böyle işte. İçindeki verilerde gidecek bunları bilerek işlem yapın. Ardından reboot sonra qpstden editlenmiş qcn restore edilecek. Reboot. Bu kadar yani işlem çoğu yapamayanlar işlemleri atladığı için oluyor tamamıyla eksiksiz yapılmalı işlem ayrıca hattınızın sim 2 de olduğundan emin olun.

aslankim34 · 14 Ocak 2020

ogi' Alıntı:
Önce komutları twrp emülatörden gireceksin. Ardından twrpden wipe data,cache,dalvik sileceksin bunları silmezsen sorun olur böyle işte. İçindeki verilerde gidecek bunları bilerek işlem yapın. Ardından reboot sonra qpstden editlenmiş qcn restore edilecek. Reboot. Bu kadar yani işlem çoğu yapamayanlar işlemleri atladığı için oluyor tamamıyla eksiksiz yapılmalı işlem ayrıca hattınızın sim 2 de olduğundan emin olun.

arkadaşım biz acemi değiliz içinde bilgiler var diye sıfırlamadım içindeki bilgilrin gideceğini bilmiyenmi var sıfırladığında bu kadarmı acemisin

ogi · 14 Ocak 2020

aslankim34' Alıntı:
arkadaşım biz acemi değiliz içinde bilgiler var diye sıfırlamadım içindeki bilgilrin gideceğini bilmiyenmi var sıfırladığında bu kadarmı acemisin

Önce uslüba dikkat edin. Wipeları yapmadan hata alacağınızı dedim sormuşsun başkasına yazmamış yardım edip cevapladım. içinde bilgiler var sıfırlamadım ondanmı oldu diye sormuşsun. Ki bu işlemlerle bilgi yarıştırmaya girme ne bilgililer gördük tökezliyor.

aslankim34 · 14 Ocak 2020

ogi' Alıntı:
Önce uslüba dikkat edin. Wipeları yapmadan hata alacağınızı dedim sormuşsun başkasına yazmamış yardım edip cevapladım. içinde bilgiler var sıfırlamadım ondanmı oldu diye sormuşsun. Ki bu işlemlerle bilgi yarıştırmaya girme ne bilgililer gördük tökezliyor.

uslup diyorsunya ne yazdığına bi bak sonra usluptan bahset-. silmezsen sorun olur
(böyle işte) emir verir gibi-- içindeki veriler gidecek bunları bilerek işlem yapın demişsin bende bunları bilmeyenmi var dedim
başkası dediğin site yöneticisi gömemiş görse dönüş yapar bide espiri olsundiye gülmüşüm adnan hocayla aramdaki samimiyet
sende birine yardım ederken biraz daha emri vaki yazma

ogi · 14 Ocak 2020

aslankim34' Alıntı:
uslup diyorsunya ne yazdığına bi bak sonra usluptan bahset-. silmezsen sorun olur
(böyle işte) emir verir gibi-- içindeki veriler gidecek bunları bilerek işlem yapın demişsin bende bunları bilmeyenmi var dedim
başkası dediğin site yöneticisi gömemiş görse dönüş yapar bide espiri olsundiye gülmüşüm adnan hocayla aramdaki samimiyet
sende birine yardım ederken biraz daha emri vaki yazma

Evet bunları bilmeyen kullanıcılar ile dolu heryer.işlemlere tam anlamıyla uymayan, onlarca bu işlerle uğraşan kişi var sorun yaşıyor sonrasında ben bunları bilerek o yüzden öyle yazdım. Başkalarınada yardımcı oldum kimse emri vaki olarak algılamadı neyse uzatmıyorum.

Bilgi Xiaomi Redmi K20 Pro IMEI Repair (Qcn ile)

ogi

ogi

shaildada

the_lazor

ogi

ogi

csessiz

ogi

shaildada

ogi

shaildada

ogi

shaildada

ogi

aslankim34

ogi

aslankim34

ogi

aslankim34

ogi